Why does my Samsung dryer not turn on?

Asked By: Lyudmila Arcan | Last Updated: 20th February, 2020
Category: home and garden home appliances
4.3/5 (29 Views . 23 Votes)
Dryer will not turn on. When your dryer doesn't power on, it could be something as simple as a tripped breaker or loose power cord. One way or another, we're going to help you get your dryer up and running again. The first step is opening the dryer door to see if the drum light turns on.

Click to see full answer


Just so, what would cause a Samsung dryer not to heat?

If your Samsung dryer will spin but will not heat, a burnt heating element could be your issue. The Samsung dryer may have a bad thermostat, thermal cut out fuse, clogged air vent line, incorrect voltage, faulty heating element, or other internal wiring issues.

Subsequently, question is, what is wrong with my Samsung dryer? Samsung dryers are generally reliable, but when something goes wrong it can bring your entire laundry routine to a grinding halt. Samsung dryer problems might include a faulty heating element or a broken drum spider. Maybe you don't even know what that is, but you will by the time you're done replacing it.

In respect to this, where is the dryer reset button?

Many dryers are equipped with a reset button on the control panel. If the motor won't run, let the dryer cool for about ten minutes. Then push the reset button. If there are no problems with the motor, switches, or electrical system, this should restart the dryer.

How do you reset a dryer fuse?

How to Reset a Thermal Fuse

  1. Unplug the clothes dryer's power cord from the wall outlet.
  2. Swing the front panel out towards you so that you can look into the compartment.
  3. Aim a flashlight at the flat-can-like component to locate the blown thermal fuse.

26 Related Question Answers Found

How long do Samsung dryers last?

The average lifespan of your washer and dryer are about the same. Generally, a washer can last between 12-14 years, while a dryer can last approximately 12-18 years. Your washer and dryer both should last at least 10 years.

How do I run a diagnostic on my Samsung dryer?

Run a Vent Blockage test
  1. Make sure the drum is empty and then close the door.
  2. Press POWER to turn the dryer on and within 5 seconds, press and hold Adjust Time Up + Dry Level until InS or In appears on the display.
  3. Press and hold START/PAUSE to start the Vent Blockage test which lasts for approximately 2 minutes.

Is there a recall on Samsung dryers?

According to the Samsung dryers class action, the defect occurs because Samsung allegedly uses thin gauge steel in the drums and defective fly wheels. Despite the alleged numerosity of affected consumers, Samsung has not issued a recall, forcing consumers to fix the problem themselves.

How do you know if your dryer sensor is bad?

Put the dryer into the test, open the door and then with wet fingers, short across the two moisture sensors. It should beep unless there is an open sensor circuit. Any Ohm meter will measure continuity.

Is there a fuse on a Samsung dryer?


The most common reason for replacing the blower thermal fuse is when the dryer won't start or not heating. All the information in this thermal fuse replacement video is applicable to the following brands: Samsung. Open the dryer door and remove the remaining two front panel mounting screws.

What is the warranty on a Samsung dryer?

The warranty period for washing machines, washer-dryers and tumble dryers is 24 months.

What does it mean when your dryer doesn't get hot?

With an electric clothes dryer, no heat often means that the circuit breaker or fuse that controls the power has blown; reset or replace it. Be aware that a dryer may have two breakers or fuses. The motor will run when one works, but the heating element requires both.

How do I find the error code on my Samsung dryer?

Samsung dryer error codes
  1. tS. Thermistor (temperature sensor) is defective (electrically shorted) Check/
  2. tO. Thermistor is defective (electrically open)
  3. do. Door is open.
  4. FE. Power supply frequency is out of range.
  5. dF. Door switch failure.
  6. HE or hE. Heating error (gas dryer)
  7. HE or hE. Heating error (electric dryer)
  8. bE. Stuck button on the control panel.

How long should a dryer last?

approximately 13 years

Will clothes dry in a dryer without heat?


Scientists have invented a dryer that can dry clothes in half the time without heat. The ultrasonic dryer. Department of Energy Waiting an hour for your clothes to dry can feel tedious. But scientists at Oak Ridge National Laboratory in Tennessee have developed a dryer that could make doing laundry much quicker.

How do you test a thermal fuse on a dryer?

How to Check a Dryer Thermal Fuse
  1. Unplug the dryer and remove the front access panel.
  2. Locate the blower cover--it's the large object facing you at the bottom of the dryer.
  3. Remove the wires from the thermal fuse terminals to test it.
  4. Set your multimeter to the R x 1 scale and touch the leads to the thermal fuse terminals to test for continuity.

How much does a heating element cost for a Samsung dryer?

Although a dryer's heating element can cost anywhere from $25 to over $200, the average cost of a heating element at the time of publication is approximately $35 to $60.

Why is the dryer not drying?

Dryer air vent hose clogged with lint. Clean your dryer AIR VENTING HOSE on a yearly basis! It is the reason your dryer takes forever to dry AND can be a fire safety hazard! At times your dryer can overheat and this can cause the motor that turns the drum to stop working temporarily.