Which situation has the highest priority for inspection?

Category: medical health first aid
3.9/5 (72 Views . 14 Votes)
Jurisdiction of agency's government: United States



Also asked, which of the following worksites has the highest inspection priority?

OSHA has jurisdiction over approximately 7 million worksites. The agency seeks to focus its inspection resources on the most hazardous workplaces in the following order of priority: 1. Imminent danger situations—hazards that could cause death or serious physical harm receive top priority.

Also Know, can OSHA do random inspections? Because there are more than seven million workplaces in OSHA's jurisdiction, it is impossible for them to inspect every single one. Because of this, OSHA tries to focus their inspections on the most hazardous workplaces, and has outlined the order of priority as the following: Imminent danger situations.

In respect to this, what triggers an OSHA inspection?

Inspection Triggers. Employers have the right to require CSHOs to produce an inspection warrant before entering the worksite. Because OSHA cannot inspect all the workplaces under its jurisdiction, the agency focuses on the most hazardous in the following priority: Imminent danger situations.

What are the 3 parts to an OSHA inspection?

There are three main components of an OSHA inspection:

  • An opening conference. The opening conference is a brief meeting during which the OSHA inspector will explain the purpose of the inspection.
  • A worksite “walkaround” The walkaround is the actual inspection.
  • A closing conference.

31 Related Question Answers Found

Which workplaces are given the highest priority?

OSHA's top priority for inspection is an imminent danger-a situation where workers face an immediate risk of death or serious physical harm. Second priority goes to any fatality or catastrophe-an accident that requires hospitalization of three or more workers.

What may the compliance officer do during the inspection walk around?

During the walk-around inspection, the compliance officer will observe conditions, point out any hazards that are observed, and discuss possible correction methods for the hazards. The compliance officer may make video recordings and take photographs and various instrument readings during the inspection.

What is an OSHA referral?

Federal, state or local hazard referrals
This inspection occurs at the urging of a federal, state or local organization or agency regarding the safety of a workplace. The media could even play a part in prompting this OSHA investigation should journalists uncover a serious safety problem within an enterprise.

Can OSHA shut you down?

The truth of the matter is that OSHA does not have the right to shut you down. In fact, the OSH Act, in describing the enforcement measures that can be taken after an inspection, describes the following list: Issue a Citation.

What will OSHA look for?


The Occupational Safety and Health Administration (OSHA) has the authority to inspect a workplace and issue citations and impose penalties for violations of government safety regulations. Certain facts are a defense to a citation and variances from a safety standard are available in limited circumstances.

How do I deal with an OSHA inspection?

Do You Really Know How To Manage An OSHA Inspection?
  1. Plan In Advance. Every company site should have a number of managers who know the basic steps to take whenever any government investigator shows up.
  2. Manage The Inspection. Step one is to ask “why” OSHA is present.
  3. Take Your Time. Don't be rushed and bullied about documents.
  4. Push Back.

What do you do if an OSHA inspector shows up?

If an OSHA inspector shows up at your door, you should consider the following:
  1. 1) Restrict admittance until management personnel are on site.
  2. 2) Determine the reason for the inspection.
  3. 3) Obtain a copy of the complaint.
  4. 4) Distinguish whether the inspection is related to safety or industrial hygiene.

What should I expect at an OSHA inspection?

What to Expect During an OSHA Inspection of Your Workplace
  • Requesting an Inspection.
  • The Pre-Inspection Preparation.
  • Advanced Noticed of Inspection (Not Likely)
  • Arrival & Presentation of Credentials.
  • The Opening Conference.
  • The Walk Around.
  • The Closing Conference.
  • Inspection Results.

How do I prepare for OSHA inspection?

Here are some ways you can prepare:
  1. Know What To Expect. When an OSHA inspector arrives, they should show you their credentials.
  2. Assign Responsibilities.
  3. Perform Hazard Assessments & Safety Trainings.
  4. Keep Good Records.
  5. Know Your Rights.
  6. Copy the Inspector.
  7. Perform Periodic Internal Audits.

How long does it take OSHA to investigate a complaint?


OSHA usually follows up these complaints with a telephone call or fax and the employer must respond within five days, identifying in writing any problems found and noting corrective actions taken or planned.

How long does an OSHA investigation take?

According to the Interim Enforcement Procedures, OSHA's telephone call to the employer should take place within one day of OSHA's receipt of the employer's initial accident report, and OSHA's letter should then require the employer to submit the written results of its investigation of the reported incident within the

What employers are covered by OSHA?

The OSH Act covers most private sector employers and their employees in the 50 states, the District of Columbia, Puerto Rico, and other U.S. territories. Coverage is provided either directly by the Federal OSHA or by an OSHA-approved state job safety and health plan.

Do you have to let OSHA in?

During the Walkaround
Employers have the right to refuse to let OSHA enter the worksite, but it's fairly easy for an inspector to then get a warrant from a federal judge that grants access, Gunnin said. That way the employer can review everything with counsel after the inspection.

Why would inspections occur sooner than the 6 month mandate?

As a common practice, inspection occurs after every six months but if a business has been raided before the average time period, that means that it was on high risk alert in terms of becoming a danger towards public health and safety.

What happens if OSHA shows?


Yes, if you have an employee fatality or a catastrophe (an incident that requires the hospitalization of three or more employees), you have to call OSHA (1-800-321-OSHA ext. 6742) within eight hours. Does OSHA only show up or are there other Modes of Inquiry? OSHA does show up for on-site inspections.

How do I become an OSHA compliance officer?

Get Relevant Education and Work Experience
To qualify for a job as an OSHA inspector, you'll need at least a bachelor's degree in a field related to health and safety standards, such as biology, engineering, chemistry or occupational health.

What are the top 10 OSHA violations?

NSC: OSHA's Top 10 Most Cited Violations
  • Hazard Communication – 6,378 violations.
  • Respiratory Protection – 3,803 violations.
  • Lockout/Tagout – 3,321 violations.
  • Electrical, Wiring – 3,079 violations.
  • Ladders – 3,072 violations.
  • Powered Industrial Trucks – 2,993 violations.
  • Electrical, General – 2,556 violations.
  • Machine Guarding – 2,364 violations.

Similar Asks
Popular Asks