Where is filter on Whirlpool washing machine?

Asked By: Benton Pietsch | Last Updated: 26th April, 2020
Category: home and garden home appliances
4.1/5 (6,059 Views . 15 Votes)
VIDEO

Click to see full answer


Regarding this, does Whirlpool washer have a filter?

A Whirlpool Duet Washer is a front-loading, energy-efficient washing machine. The filter on a Whirlpool Duet is located under the front kick plate. A washer filter collects lint that falls from clothes during the washing process. The lint filter should be cleaned at least once every 6 months.

Also, where is the filter on a Whirlpool top loader washing machine? Step 1: Locate the filter Usually, it will be on the bottom right of the washing machine, making access rather easy. Of course, your model may be different so you may need to consult the user's manual or give your washer a quick look over to find it.

Furthermore, where is the drain pump filter on a Whirlpool washer?

The location of the drain pump filter in a Whirlpool Duet washer is accessible through the lower access panel below the washer door.

  1. Unplug your Whirlpool Duet washer power cord from the wall outlet.
  2. Find the screws securing the lower access panel to the washer cabinet.
  3. Remove the screws with a 1/4-inch nut driver.

Do all washing machines have a filter?

Most washing machines will have a filter – you can find it at the front of the washing machine, behind a small hatch. It is essential that you regularly clean this filter, as it will collect everything from lint to hair, coins, tissues and more.

30 Related Question Answers Found

Where is a filter on a washing machine?

Find your washing machine filter.
For front-loading machines, the filter will be in the bottom right corner on the outside of the washer. If you have an older top-loading washer, your filter will also be in the bottom right-hand corner of the machine.

Where is the lint filter on a washing machine?

Technically, the lint trap in most front loading washers is a pump filter. Located on the lower front of the washer, most models, such as the LG, GE, Whirlpool and Splendide, have a filter that catches coins, keys and lint.

Do top loading washing machines have filters?

Most front load washers have a small door near the bottom of the appliance that can be opened to remove any lint or debris caught in the water pump filter. Top-load washers and standard top-load washers usually require removing the outer housing to access the water pump filter from the back of the machine.

Is there a lint trap in a washing machine?

Certain models have a removable screen filter located in the washing machines drum. To locate simply feel with your fingers along the top of the drum, if your machine has this lint trap you will run into it at this point, remove and clean off lint. Top loading washing machines may have a lint trap with in the agitator.

How do you clean the lint trap in a washing machine?


How to Clean the Lint Collector for the Washing Machine
  1. If the screen is removable, soak it in hot water for 10 minutes to clear away residue.
  2. If the filter is secured in place, clean lint from it with a soft brush or paper towel.
  3. If the trap is disposable, replace it when it becomes clogged.

How do I clean my washing machine inlet filter?

Samsung Washer - Clean the inlet water supply filters
  1. Remove the hot and cold water inlet supply hoses from the back of the washing machine.
  2. Locate the inlet hose filter inside of the hot and cold water inlets on the back of the washing machine.
  3. Remove the filters by pulling them straight out by the tab in the center of the filters.

Where is the filter in a top loader washing machine?

Top Load Washer - Lint / Pump Filters
  • There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket, under the agitator.
  • During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.
  • These filters should never require cleaning or replacement.

Where is the drain pump on a washing machine?

The pump is usually located along the bottom of the machine, but with the unit tipped on its front, it's easier to remove the pump through the back than through the bottom of the washer. Step 3: Locate the pump. It has two large hoses attached to it with spring or strap clips.

How do I manually drain my Whirlpool washer?

Remove the front panel screws
Start by unplugging the machine and emptying the water. Bail the water out of the tub, or you can drain the tub using gravity by placing the washer drain hose on the floor near the drain or in a bucket. Clamp the hose to prevent any remaining water from running out.

What does a 10 mean on a Whirlpool washer?


A10 or F03. Long drain. Check/ Repair. Remove excess suds; the washer can't drain excessively sudsy water.

How do clean a washing machine?

Add two cups of white cleaning vinegar to detergent dispenser. Run it through a complete cycle. Run another cycle on the highest level and at the hottest water temperature, this time adding one-half cup of baking soda to the drum. When cycle is done, wipe inside drum of washer with a damp microfiber cloth.

How do I clean my Whirlpool front load washer?

  1. Mix 3/4 cup liquid chlorine bleach with 1 gallon warm water.
  2. Open the door of the Whirlpool Duet washer and look for stains on the gray seal located just inside the machine.
  3. Wipe the seal with a clean, dry cloth and leave the door open until the seal is completely dry.
  4. Mix a small amount of dish soap in warm water.

How do I clean the filter on my GE top load washer?

How to Clean the Filter in a GE Top Load Washing Machine
  1. Turn off the GE washer and unplug from the power supply. Unscrew the screws on the front access panel and set the screws aside.
  2. Locate the drain plug, which is typically a white plastic piece. Place a large container underneath the drain plug and slowly open the plug partially to allow water to drain.

What is the use of lint filter in washing machine?

Lint is small fibers which separate from the surface of cloth while washing in the washing machine. These filters are designed to catch lint, pieces of wet paper that are accidentally left in the clothes. While washing lint from clothes attaches to other clothes, as a result, it forms a dust like surface on clothes.

How do I clean sludge out of my top loader washing machine?


Steps To Cleaning a Top-Loader With Vinegar:
  1. Turn your washing machine on the hot water setting (largest load possible) and let it fill up.
  2. Once it begins to agitate, open the lid to make it stop.
  3. Now, add about 3 cups of filtered white apple cider vinegar.
  4. Add ¾ cup of baking soda and stir it the mixture.