Where are the mounting holes on a Panasonic Viera?

Lean the TV against a wall and line up the long metal pieces from the wall mounting kits – the monitor brackets – with the holes on the back of the TV. Make sure the bottom of the brackets – the end with the small pre-drilled holes – is at the bottom of the TV.

Also asked, what size screws for Panasonic TV wall mount?

However, if you choose to use another brand of wall bracket, please be sure it will accommodate the position of the mounting bolt holes on the Panasonic Plasma TV (660mm x 320mm pattern), the thread of the screws (M8 type), and support the weight of the display (consult the Operating Instruction manual for your model).

Subsequently, question is, can Panasonic Viera be wall mounted? Fortunately, flat screen TVs – including Panasonic's line of Viera TVs – can be mounted on a wall, making a larger entertainment center or TV stand unnecessary.

Then, are Panasonic TVs VESA compatible?

No, it's not a standard size - standard sizes are normally 200x200mm, 400x300mm, 400x400mm. The Panasonic 55" Plasmas are 500x300mm which is a standard VESA size but wouldn't fit on your bracket. You need to use an M8 size bolt with a screw depth (into the socket of the TV) of 17mm-23mm.

Is it better to wall mount a TV or put it on a stand?

TV stands do take up more room than wall mounted versions, so if you have restrictions on your floor space, they probably aren't the best option. Being balanced on a table also means that if someone knocks them, the TV can fall over. If you have children or pets, a TV mount may be a better idea.

33 Related Question Answers Found

Will my wall mount hold my TV?

Generally speaking, TV size and weight go hand in hand. The larger the TV, the heavier it is. Mounts will have a maximum weight rating, as well as a range of VESA standards that are compatible. As long as your monitor falls within the designated guidelines, the mount should easily hold the weight of your TV.

How do you take a TV off a wall mount?

Remove Your TV From the Wall Mount

For best results, have a friend hold one side of the TV while you hold the other. Lift the TV upwards slowly until it comes off of the wall mount completely. Gently place the TV face down on a blanket or another soft surface.

How do you mount a TV on the wall without drilling holes?

STANDiT by ERARD, the only No Drill TV Wall Mount

STANDiT by ERARD is an innovative concept to wall mount your screen without drilling. Wall mounting your TV has never been so simple! Regardless of the type of your wall (plaster board, glass, brick, wood ) STANDiT allows you to hang your TV without any drilling.

Are TV wall mounts safe?

Mounting your flat-screen TV on the wall can dramatically improve viewing quality and flexibility. But wall mounts are also valuable safety features. And although new models aren't nearly as heavy as their predecessors, a falling TV could still seriously injure or even kill a child or pet.

What screws to mount TV to wall?

Screws for Mounting TV to Wall Bracket:

The most common screw for securing the TV to the wall bracket is an M8 screw. The other screw sizes for some TVs are M4, M5, and M6. The length will be determined by the type of TV you have.

What screws do I use to mount my Samsung TV?

Replacement wall mount screws

For TVs 19 - 22 inches, the screw size is M4.
For TVs 30 - 40 inches, the screw size is M6.
For TVs 49 - 88 inches, the screw size is M8.

What is a m8 screw?

M8 is the designation for a metric (M) sized bolt or screw that is 8mm (8) in diameter. This is roughly equivalent to a 5/16 bolt or screw.

What are VESA screws?

VESA Screws Hold Qualifications

Screws for screens that weigh 110 pounds or less must have a minimum diameter of 6 millimeters (1/4-inch) and a pitch of 1.0.

Do tvs come with mounting screws?

Look like 1/4-20. But no , TV does not come with screws. You'll find them in with mounting bracket.

What size are VESA screws?

VESA MIS-D, 100/75, C compliant displays are equipped with either a 100 x 100 mm or 75 x 75 mm square hole pattern, using M4 screws for attachment of the mount to the display.

How long are m8 screws?

For the bottom screws use M8 in 45mm length along with the included wall mount adapters. The length will be 45 mm.

What size lag screws for TV wall mount?

The 6 mm screws do in fact hold our TV's up; the brackets screw to the back of the TV with them. I use the cheap HF mounts, and they do come with huge lag bolts.

How do I know my VESA size?

DETERMINING YOUR TV'S VESA SIZE

Measure the horizontal distance between the centers of the left and right holes. This will give you the first measurement.
Measure the vertical distance between the centers of the top and bottom holes.
If you're measuring in inches, convert to millimeters (1 inch = 25.4 mm)

What does VESA 400x400 mean?

What is the VESA Standard? The VESA Interface Standard defines the distance in millimeters between the four mounting holes on the back of a TV (distance horizontally x distance vertically). Common VESA sizes are 200 x 200, 400 x 400 and 600 x 400 depending on the screen size of your TV.

Are all TV wall mounts the same?

Most TV mounts follow compatibility standards set by the Video Electronics Standards Association, or VESA. This standard ensures that all VESA-compatible TVs and mounts are totally interchangeable. It's a good bet that any TV mount sold today is VESA-compatible, but you should always confirm, just to be sure.

Are TV brackets Universal?

Most wall brackets available are 'universal' so can be adjusted to fit a variety of different screen sizes. Before you buy a bracket make sure to check the screen sizes it claims to fit and also the maximum weight the bracket can hold – you don't want your TV falling off the wall!

What is vesa400?

VESA is a standard used for TV brackets and wall mounting systems, adapted by most TV brands. Most common VESA sizes are 200 x 200 for TVs up to 32 inch, VESA 400 x 400 for TVs up to 60 inch and VESA 600 x 400 for bigger screen TVs such as 70 or 84 inch.