What type of transmission fluid does a 2009 Ford Fusion use?

Asked By: Judite Bestuzhev-Lada | Last Updated: 18th June, 2020
Category: automotive scooters
4.3/5 (2,481 Views . 41 Votes)
For the 2009 Ford Fusion, you'll want to use a Motorcraft Genuine Ford Fluid XT-10-QLVC MERCON-LV Automatic Transmission Fluid.

Click to see full answer


Correspondingly, how much transmission fluid does a 2009 Ford Fusion take?

Add three quarts of the transmission fluid (Image 5D).

One may also ask, what kind of transmission fluid does a 2008 Ford Fusion use? Ford Fusion 6-Speed 2008, ATF Type T-IV Automatic Transmission Fluid by AISIN®.

Beside this, what kind of transmission fluid does a 2010 Ford Fusion take?

Ford Fusion 2.5L / 3.0L / 3.5L 2010, Professional™ Full Synthetic Dexron™ VI Automatic Transmission Fluid by ACDelco®.

How do you check the transmission fluid on a 2009 Ford Fusion?

Open the hood (with the engine running). Locate the transmission dipstick, pull it out and wipe it off. Reinsert the dipstick and pull it back out. Make sure that the fluid is within the hot operating temperature range.

32 Related Question Answers Found

How often should you change transmission fluid?

Manual: Most manufacturers recommend that manual transmission fluid be changed every 30,000 to 60,000 miles. Under heavy-duty use, some manufacturers suggest changing transmission fluid every 15,000 miles. Automatic: Service intervals for an automatic transmission vary from every 30,000 miles to never.

What oil does a 2009 Ford Fusion take?

The SAE classification 5W-20 is the best engine oil for the 2009 Ford Fusion.

How do you add transmission fluid?

Steps
  1. Park your car on a level surface with the engine running.
  2. Raise the hood.
  3. Find the automatic transmission fluid pipe.
  4. Pull out the transmission fluid dipstick.
  5. Check the condition of the transmission fluid.
  6. Add transmission fluid, if necessary.
  7. Run the car and take it through each gear if possible.

What is fnr5 transmission fluid?


Motorcraft® FNR5 Automatic Transmission Fluid (ATF)
High-quality transmission fluid for the Ford Fusion and Mercury Milan. Manufactured with high-quality, high-viscosity index base oils and specially designed performance additives.

When adding transmission fluid should the car be running?

It is not necessary to run the engine while adding transmission fluid. If you are concerned about overfilling, just add all but one pint of the recommended amount, start the engine, idle till normal operating temp, then check the fluid level and add more as necessary.

What kind of transmission fluid does a 2011 Ford Fusion take?

Lubegard Synthetic Transmission Fluid Dexron VI 1 Quart.

Does a 2011 Ford Fusion have a transmission filter?

Ford Fusion 2.5L / 3.0L Automatic Transmission 6F35 Transmission 2011, Automatic Transmission Filter Kit by ATP®. Motorcraft is the way to restore the performance of your vehicle.

How do you check the transmission fluid on a 2010 Ford Fusion?

  1. Getting Started.
  2. Open the Hood.
  3. Remove Dipstick.
  4. Check Level. Insert dipstick and pull it out to determine level.
  5. Add Fluid. Determine correct fluid type and add fluid.
  6. Replace Dipstick.
  7. More Info.

What kind of transmission fluid does a 2012 Ford Fusion take?


Ford Fusion 2012, Professional™ Full Synthetic Dexron™ VI Automatic Transmission Fluid by ACDelco®. ACDelco DEXRON-VI Automatic Transmission Fluid is the most recent release in the well-established DEXRON series of automotive

How do you check automatic transmission fluid?

To check your automatic transmission fluid, follow these steps:
  1. Pull out the dipstick. With the gearshift in Neutral or Park and the parking brake on, let your engine run.
  2. Check the fluid.
  3. Wipe the dipstick with a clean, lint-free rag; then reinsert it and pull it out again.

What type of transmission fluid does a 2006 Ford Fusion take?

Ford Fusion 6-Speed 2006, ATF Type T-IV Automatic Transmission Fluid by AISIN®.

What kind of transmission fluid does a 2007 Ford Fusion use?

Ford Fusion 6-Speed 2007, ATF Type T-IV Automatic Transmission Fluid by AISIN®.

How do you check the transmission fluid on a 2006 Ford Fusion?

  1. Getting Started.
  2. Open the Hood.
  3. Remove Dipstick.
  4. Check Level. Insert dipstick and pull it out to determine level.
  5. Add Fluid. Determine correct fluid type and add fluid.
  6. Replace Dipstick.
  7. More Info. Additional information on checking trans. fluid levels.

How much oil does a 2006 Ford Fusion take?


Place a funnel in the oil fill hole and pour 4.8 quarts of 5W-20 oil for the 2.3-liter or 6 quarts of 5W-20 oil for the 3.0-liter.

What are the symptoms of low transmission fluid?

Here are some low transmission fluid symptoms you should know about.
  • Trouble Shifting Gears. One of the reasons for having problems with the transmission is debris in the fluid.
  • Unusual Shifts.
  • Surging Transmission.
  • Delayed Gear Engagement.
  • Gear Slippage.
  • Transmission Becomes Overheated.

Does a 2010 Ford Fusion have a transmission filter?

Ford Fusion 3.5L 2010, Automatic Transmission Filter by ATP®.