What type of shower faucet do I have?

For sink faucets, look at the front of the spout. The logo may also be on the base of the spout, where it meets the sink, either on the front or the back. For shower faucets, look on the round plate (escutcheon) behind the handle, on the handle itself, or perhaps on the actual valve behind the wall.

In this regard, how do I know what kind of shower faucet I have?

Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a "K," the faucet is a Kohler unit; an "M" signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet.

Beside above, how many types of shower valves are there? five

Similarly, it is asked, are shower faucets universal?

They are all universal and all Delta Shower Trim Kits will fit every single one of these valves.

Do you need to turn off water to change shower faucet?

Turn off the shower faucets so you don't get drenched while you're working. There's no need to turn off the water to the house. Unscrew the old showerhead by twisting it by hand in a counterclockwise direction. Most aren't screwed into place, but if yours is, remove the screws first.

36 Related Question Answers Found

Do I need to replace shower valve?

Why You Should Consider Checking Your Shower Valves

If there are drips, that's a good indication that you should think about replacing the valve. Because, not only are you wasting water, but water that leaks behind the wall can cause rot as well as mold and mildew growth.

How do you know if your shower valve is bad?

Another way to know if you have a bad shower valve is you do not have a problem at all. Sometimes believe it or not the valve can be put in upside down. So, when the shower is on and the water is coming out of the showerhead you also see water coming out of your spout. But, a tiny drip is normal.

What is a shower valve?

A shower valve performs two basic functions, it controls the temperature and the flow of the water in your shower. It controls the temperature by mixing hot and cold water from your hot and cold water supplies in different proportions and generally has a single control to do this with.

What are the different types of faucets?

The most common faucet types are:

Ball Faucet. The first type of washerless faucet, ball faucets are commonly used in kitchens.
Cartridge Faucet (Two Handle) Cartridge faucets utilize a movable stem cartridge which moves up and down to control the flow of water.
Disc Faucet.
Compression Washer Faucet.

What are the different types of bathroom faucets?

What are the Different Types of Bathroom Faucets?

Bridge. If you're looking to combine old-fashioned style with today's technology, bridge faucets might be for you!
Centre-set. Bathroom faucets that are centre-set work with basins with three holes.
Single-handle.
Spread-fit.
Deck mount.
Wall-mount.
Vessel.

How do I know if my faucet cartridge is bad?

Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.

What is the difference between a faucet for a sink and a faucet for a tub?

Look for an all-brass body, as opposed to brass- or chrome-plated. And keep in mind that the tub faucet has a larger flow rate than other household faucets, which means you can't use a kitchen faucet or your tub. Bathtub faucets should have a 3/4-inch supply line, as opposed to 1/2-inch for the rest of the house.

How do I choose a bathroom faucet?

Faucet Types

Single-hole faucets combine the spout and mixing handles—often a single lever—into one unit that requires only one drilled sink hole.
Center-set faucets fit standard three-hole sinks (with outer holes drilled 4 inches apart).
Widespread mounts have three separate pieces: Two handles and the spout.

What is a faucet cartridge?

Each faucet handle (hot and cold) has its own cartridge, a valve that turns with the handle to control the flow of water into the faucet spout. If you have a very old two-handle faucet, it may be a compression-type rather than a cartridge.

How do you change a faucet cartridge?

TURN OFF WATER. Turning off the water at the shut off valves under the sink.
PRY OFF HANDLE. Pry off the handle cap using a small flat screwdriver.
REMOVE HANDLE FROM ASSEMBLY.
REMOVE THE RETAINING NUT.
REMOVE THE RETAINING CLIP.
REMOVE THE O-RING.
REPLACE THE CARTRIDGE.
REINSTALL THE O-RING.

How do I identify my Moen shower valve?

The model/series number is usually a four or five digit number beginning with "7" or "8" and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.

Can you reuse a shower valve?

If you're inquiring about re-using the old 3 handle fixtures, then most likely yes. But you need to look at the quality of the old pipes and valves. It might just mean cutting the pipes off at the source and attaching them to the new feeds.

How long does a shower valve last?

20 to 30 years

Can you mix and match shower parts?

Shower Trim

You can coordinate the same style and finish across all components, trim and fittings, as well as faucets and accessories, or you can mix and match.

How much does it cost to replace a shower valve?

As a professional plumber can install one in less than two hours, the replacement cost is not particularly expensive. All in all, a DIYer can spend 4-6 hours and about $135 replacing a shower valve while a pro can install one in under 2 hours for about $375 – $575.

How do I choose a shower valve?

How to Choose the Perfect Shower Faucet (5 Expert Tips)

Choose the Right Shower Valves. First, you'll want to consider the shower valves, which is the plumbing part that controls the water flow of the shower tap.
Pick the Configuration and Type.
Check the Water Pressure.
Consider Accessories.
Find Something in Your Budget.

Where is shower valve located?

This supply valve is usually near the bottom left side of the toilet tank. For showers/tubs, look around the tub or shower for an access panel. It may be on the other side of the wall from the tub or shower.