What type of oil does a Murray lawn mower take?

Asked By: Carlos Artusa | Last Updated: 15th March, 2020
Category: business and finance gasoline prices
4.4/5 (1,755 Views . 33 Votes)
For operating at a varying temperature range 6 degrees F and above, use 10W30 weight. For strictly warmer temperatures above 46 degrees F, SAE 30 is recommended. Otherwise, use 5W30 synthetic oil, which can be used at all operating temperatures.

Click to see full answer


Likewise, what kind of oil goes in a Murray lawn mower?

Changing the oil in a Murray lawn mower is the same as with any other mower. Murray suggests using SAE 30 motor oil for both riding and push mowers. Call an auto parts store to find disposal locations for the used mower oil.

Subsequently, question is, what kind of oil does my riding lawn mower take? The standard oil used for 4-stroke engines found on petrol lawnmowers is grade SAE 30. Synthetic variations include SAE 5W-30 and SAE 10W-30.

Consequently, can I use 10w30 oil in my lawn mower?

Yes! We have modified our engine oil recommendations to state that you may now use a synthetic 5W30 (100074WEB) or 10W30 oil in all temperature ranges. We recommend the use of Briggs & Stratton Synthetic Oil. Engine break-in procedures using synthetic oil remain the same.

Can you use regular motor oil in a lawn mower?

SAE 30 motor oil is commonly recommended for use in a lawn mower engine, but the safest best is to use the type of oil your lawn mower manufacturer recommends. Often 10W-30 or 10W-40, the same motor oil types that are used in vehicles, can also be used in a lawn mower.

37 Related Question Answers Found

How much oil does a Briggs and Stratton engine take?

When operating your 12.5 HP engine at temperatures above 40 degrees Fahrenheit, Briggs & Stratton calls for 48 fluid ounces (1.5 quarts) of SAE 30 weight detergent motor oil approved for four-cycle engine service levels SF-SJ or higher.

Is SAE 30 the same as 10w30?

Nope. SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. The W stands for 'Winter'.

Can I use 10w30 instead of SAE 30 in my lawn mower?

Yes; you can make use of it. But there are other factors you need to consider. These include temperature and the engine. Older engines can use the SAE30, while the 10W30 is for modern engines.

Is SAE 30 the same as 5w30?

The W means winter. So the first number such as 5 in 5w-30 means that it flows better when cold. 10w-30 would be a bit thicker while cold. However it is important to note that the 30 is the same across all three oils, meaning that they will all be the same viscosity once the engine is at full operating temperature.

How much oil does a Briggs and Stratton 6.75 take?


Use Briggs & Stratton SAE 30W Oil above 40°F (4°C) for all of our engines. Check oil level regularly. Air-cooled engines burn about an ounce of oil per cylinder, per hour. Fill to mark on dipstick.

Can I use 5w30 instead of SAE 30 in my lawn mower?

5w-30 is fine to use. It has the same flow rate as SAE30 at normal operating temps. The way oil works is, the first number is flow rate at ambient temp. The second number is flow rate at operating temp of the engine.

What is the difference between small engine oil and car oil?

The oil temperature in a small engine can reach 280 – 300 degrees Fahrenheit on a hot summer day. This is nearly 100 degrees hotter than the oil in a typical car. Automotive SN/SL oils are not designed for these temperatures and will begin to break down.

What happens if you overfill oil in lawn mower?

Effects of Excess Oil
The lawn mower engine would need to produce more heat than usual, which also leads to overheating. Moreover, excess oil will negatively affect the motion of the crankcase. If the oil drowns the crankcase, you need to remove it as fast as possible.

What oil does a Briggs and Stratton engine take?

Use Briggs & Stratton SAE 30W Oil above 40°F (4°C) for all of our engines. Check oil level regularly. Air-cooled engines burn about an ounce of oil per cylinder, per hour.

What happens if you put 2 cycle oil in a lawn mower?


Gas and Oil Don't Mix
If you accidentally pour oil into the gas tank, it will not damage the mower if you drain it and replace it with gas. Maneuver the mower so that the oil can drain from the gas tank and get as much out as possible. Put the oil in its proper place and use the mower as usual.

What is the difference between SAE 30 and SAE 40 oil?

If a liquid has high viscosity, it means it will take a longer time to flow whereas liquids with low viscosity flow faster. The motor oil grade is usually written as follows “XW-XX”. For example: SAE 10W-30, SAE 10W-40 or SAE 30. It represents how quickly the oil will thin out at a higher temperature.

Can I mix SAE 30 with 10w30?

You can mix straight weights like SAE 10 and SAE 30 or multi-grades like 10W30 and 10W40. Run your straight 30 during the summer if you want to.

How much oil do I put in my lawn mower?

Most small engines need 20 to 24 fluid ounces of oil. Small engines typically use SAE 30 single-weight detergent motor oil service-rated SG or higher, but some can use multiviscosity oils such as 10W-30 or 10W-40. Fill the crankcase slowly. Keep tabs on the oil level by checking with the dipstick as you add oil.

How often should I change the oil in my lawn mower?

Most mower engines need their oil changed every 20-50 hours of operation. A mower's owner's manual will indicate how often to perform oil changes on the mower. At the very least, an oil change should be done annually with other seasonal tune-up maintenance.

Does my Briggs and Stratton have an oil filter?


Yes. The Briggs and Stratton Oil Filter is made for Intek and Vanguard OHV engines on most riding lawnmowers. 2. In most cases if it is a Briggs & Stratton engine then yes.

Is lawn mower oil different from car oil?

They use the same oil as automobiles, but owners should check manuals because these small engines are sensitive to additives and alternatives. Typically, these engines use straight SAE 30 weight oil or multi-viscosity 10W-30 oil, both common auto engine oils.

Is synthetic oil good for small engines?

Synthetic oils are always a better choice
While conventional oils are effective for your small engine, the improved synthetic oils offer more benefits, making it a more popular and better choice for your engine. These oils offer better viscosity, wear and deposit control and low-temperature fluidity.