What replaces Bryant breakers?

The Eaton Cutler-Hammer 20 Amp 2 in. Double-Pole Type BR Replacement Circuit Breaker is UL-listed and compatible with Westinghouse, Challenger and Bryant load centers. The circuit breaker is designed for overload and short-circuit protection of your home electrical system.

Also, are Bryant and Eaton breakers interchangeable?

They are not at all the same. BR Bryant and BR Eaton/Cutler hammer are the same. Zinsco is a completely different breaker that are not remotely close.

Also Know, how do you replace a Bryant circuit breaker? How to Replace a Bryant Circuit Breaker

Shut off the power at the main breaker inside the main power panel. Unscrew the bolts holding the breaker cover in place.
Use a large screwdriver to pry out the defective Bryant circuit breaker.
Push the new breaker back into the old position of the power panel.

Just so, who bought out Bryant breakers?

Bryant became a subsidiary of Westinghouse in 1901 and remained one till that part of Westinghouse was bought by Cutler Hammer, now Eaton.

Are Bryant and Murray breakers interchangeable?

Murray and GE breakers will fit just fine.. check with the manufacture if they accept that brand breaker going into a Bryant panel..

32 Related Question Answers Found

Will Eaton breakers fit Challenger panels?

The Eaton Cutler-Hammer 20 Amp 1 in. Single-Pole Type BR Replacement Circuit Breaker is designed to protect house wires from overheating or causing a short-circuit. The UL-listed breaker is compatible with Westinghouse, Challenger and Bryant load centers and has a maximum load of 240-Volt.

Are CH and BR Breakers interchangeable?

Re: Cutler Hammer CH vs BR

The breakers are physically interchangeable with Homeline, GE, Siemens, Westinghouse, and Murray (a Siemens division), and possibly others. Being physically interchangeable does not mean that it is legal or legitimate per code or UL listing to do so, however.

Are Eaton and Cutler Hammer the same?

Cutler-Hammer and the Eaton family of products are the same and compatible. Parts number have not changed, just the Eaton name has been placed on the product. For more on the Cutler Hammer brand click here Cutler Hammer Brand.

What is Type BR breaker?

Single-Pole Type BR Replacement Circuit Breaker is designed to protect house wires from overheating or causing a short-circuit. The UL-listed breaker is compatible with Westinghouse, Challenger and Bryant load centers and has a maximum load of 240-Volt.

Are Square D and GE breakers interchangeable?

Is a Square D breaker allowed in a General Electric panel?? Nope, Square d does not list their breakers for use in other panels. It might be better to say they do not make classified breakers. A classified breaker is one that has been tested by a 3rd party.

What does BR stand for on Eaton breakers?

Black handle. 10 year warranty. BR breakers are UL approved genuine replacement breakers for loadcenters made by Westinghouse, Challenger, and Bryant.

What is the difference between Eaton Br and CH breakers?

What is the difference between BR and CH type breakers? BR breakers are 1" in Width. BR breakers are black, with black handles (In most cases. BR breakers carry a 10 Year Warranty.

Does Home Depot sell circuit breakers?

Circuit Breakers - Electrical Solutions - The Home Depot.

Are Cutler Hammer and Square D breakers interchangeable?

[Electrical] square D in a cutlerhammer box. is it safe to use square D breaker in a cutler hammer box. Both breakers fit. Only if the model number of the breaker is listed by the box as acceptable.

Who makes Square D circuit breakers?

Schneider Electric

What kind of breakers are compatible with Cutler Hammer?

Find Old and Obsolete Eaton and Westinghouse Breakers

While you now know that Eaton breakers, Westinghouse breakers, Square D breakers, and Cutler-Hammer breakers are largely compatible, you still need to find the exact models you need for your facility.

What interchanges with Cutler Hammer breakers?

The UL-listed breaker is compatible with Westinghouse, Challenger and Bryant load centers and has a maximum load of 240-Volt.

How do you know if a circuit breaker needs to be replaced?

Circuit Breaker Warning Signs

Burning Smell in the Electrical Panel. One way to tell if you need a circuit breaker replacement is to sniff around and see if you smell a burning odor coming from the panel.
Breaker Will Not Remain Reset.
Physical Damage.
Breakers Tripping Frequently.
Old Age.

How much does it cost to replace a circuit breaker?

The cost replace a circuit breaker switch is $150 to $200, which includes labor and materials. Fuses can be bought for as low as $5 to $40 depending on which type you need for your home. Most of the cost is for labor—the average cost for an electrician is $40–$99 per hour, and this job can take 2–3 hours.

What breaker will fit a Bryant panel?

The Eaton Cutler-Hammer 20 Amp 2 in. Double-Pole Type BR Replacement Circuit Breaker is UL-listed and compatible with Westinghouse, Challenger and Bryant load centers. The circuit breaker is designed for overload and short-circuit protection of your home electrical system.

Can I replace a 20 amp breaker with a 15 amp breaker?

The answer: It's possible, but not advisable without an electrician evaluating the situation. You should never just upgrade from a 15-amp breaker to a 20-amp one just because the current one is tripping. Otherwise, you may burn your house down via electrical fire.

Do circuit breakers get weak?

In either condition, it actually takes heat to trip the circuit breaker. Older breakers that are 15-20 years old can get weak and trip during normal usage and can be easily checked with an amperage meter to verify."