What is the standard bar overhang?

The bar top overhang should be a minimum of 8-1/2” and could be as much as 10” so your knees do not hit the bar front. For our extra tall customers the 10” overhang maybe necessary.

Accordingly, what is a good overhang for a bar?

A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.

One may also ask, how wide should a breakfast bar overhang be? If you're doing a breakfast bar on the outside rather than storage, they are only one set of cabinets deep, but the bar will have 12-18 inches of overhang.

In this regard, what is a typical countertop overhang?

Hanging Out on Basic Counters A typical countertop overhang extends 1 to 1 1/2 inches from the cabinet bases, not the doors. The exposed ends of a countertop normally have a 1/2-inch overhang, while those that meet a wall have no overhang for a flush fit.

What is the standard overhang for quartz countertops?

Different countertop materials have different requirements. Solid Surface countertops can overhang 6 inches without additional support (e.g. plywood decking). 3 cm Quartz (engineered stone) can handle a 14 inch overhangs and 3 cm Granite overhangs should not exceed a 10 inch overhang without additional support.

37 Related Question Answers Found

How much overhang do I need for bar stools?

Raised Bar

The raised section should be 42 inches to 48 inches high to accommodate the bar stools. An overhang of 12 inches should be adequate in these instances.

How long should island overhang?

Use the basic dimension of 12 inches as a typical bar overhang. This allows room for stools to rest under the counter. If you can spare 18 inches, however, this means you have knee room without pulling the stools too far into the aisle space.

How long should a bar be for 4 stools?

In order to determine how many stools will fit at your kitchen island, home experts recommend you allow 28 to 30 inches for each seating space, which means you can divide the length of your island's counter by 30 to to figure out how many stools will comfortably fit.

How tall should bars be?

42 inches

What is standard bar height?

Standard bar heights are 40 and 42 inches from the floor. This is slightly higher than countertop height, which is generally 34 to 36 inches above the floor.

How far should island counter overhang for stools?

Stools for raised 42-inch countertops are usually between 28 and 30 inches tall, giving a comfortable 12 to 14 inches of knee room. The recommended counter overhang also varies with the counter height, with experts suggesting 15 to 18 inches for the lower counter and 12 inches for a raised counter.

How do you support a counter overhang?

Do's of Countertop Supports

Ensure your supporting structure is sufficient for holding your countertop and supporting brackets or corbels.
Use a countertop support that extends to within 4 inches of edge of your countertop.
Fasten your supports to the most substantial support available.

How far can you overhang granite without support?

Granite Overhang Limits Per Experts

According to the Marble Institute of America, you can safely overhang granite that is 1- 1/4″ thick up to 10″ without supports. However, the cantilevered portion cannot be more than 1/3 the total width of the countertop.

Are Waterfall countertops too trendy?

Waterfall countertops are considered more of a modern style. I do feel its more likely to not go out of style if it's based on a good, clean design. It's almost a dramatic way of displaying a beautiful countertop. So, be picky about the countertop material you are choosing.

Should countertops be flush with cabinets?

Flush Countertops with No Overhang

Yet another trend is the overhang. Typically, a countertop protrudes past the face of the doors and drawers so that any spills from the counter drop directly to the floor where they can be easily wiped clean (instead of dribbling down the face of the cabinets and hardware).

How thick should a countertop be?

Generally speaking, there are 3 thickness of quartz slabs used for countertop fabrication. Countertop thickness is measured in centimeters. The standard thicknesses are 1CM (some manufactures actually use 1.2CM), 2CM, and 3CM. 1 CM is equal to 3/8”, 2CM is equal to ¾”, and 3CM is equal to 1 ¼”.

How much space do you need for a counter stool?

As a good rule of thumb, 10 to 12 inches should be the allotted amount of space between the stool seat and the underside of your counter or table. If you measure from the floor to the underside of the counter and consider this rule, you should be able to select the proper seat height for your space.

How much space do you need behind Island seats?

If there is no walkway behind the island or peninsula, the National Kitchen and Bath Association (NKBA) recommends a minimum of 32" of clearance space between the edge of the countertop or table to any wall or other obstuction behind the seating area.

How much should the overhang be on a granite countertop?

The standard overhang is 1 ½” from the face frame of the cabinets. This gives a good visual appearance because it creates a ¾” overhang from the door fronts. You can compare this to the 1” overhang typical of the laminate countertops you are looking to replace with granite.

How much knee space do you need for a bar?

The NKBA guidelines recommend that each seat be 24 inches wide. But the depth, or knee space, required varies with countertop height. For a 30-inch-high island, knee depth should be 18 inches; for a 36-inch height, it should be 15 inches; and it should be 12 inches for a 42-inch-high island.

How much overhang should you have on a kitchen worktop?

Where your kitchen cabinets do not extend right up to the wall of the room, you will want your worktop to overhang the edge of them. Allow for between 10 and 20 mm of overhang when sizing the amount you will need, but you can reduce this degree of overhang when actually fitting a worktop, if wanted.

How do you make quartz countertops look thicker?

When it comes to quartz slabs, the two most common thicknesses are 2cm (~¾”) and 3cm (1 ¼”). It's also possible to create the look of a thicker countertop by building up the edge. This can create a more substantial look and style for the space.