What is the size of Hardiflex?

Asked By: Reggie Glasener | Last Updated: 23rd February, 2020
Category: home and garden indoor environmental quality
4.3/5 (2,704 Views . 41 Votes)
Standard Sheets Size
Sheet Thickness
Dimension (Length x width) 4.5mm 6.0mm
2440mm x 1220mm (8ft x 4ft)
3660mm x 1220mm *

Click to see full answer


Also know, what is HardiFlex?

A cement board is a combination of cement and reinforcing fibers formed into 3 by 5 feet (91 by 152 cm) sheets, 14 to 12 inch (6.4 to 12.7 mm) thick that are typically used as a tile backing board. Cement board adds impact resistance and strength to the wall surface as compared to water resistant gypsum boards.

Beside above, how durable is HardiFlex? Advantages HardiFlex building boards are as durable as they are adaptable - they will not burn, are resistant to permanent water and termite damage and when installed as directed, are resistant to rot and warping.

Herein, is HardiFlex cancerous?

Breathing in asbestos fibres can cause asbestosis, lung cancer and mesothelioma. The risk of contracting these diseases increases with the number of fibres inhaled and the risk of lung cancer from inhaling asbestos fibres is also greater if you smoke.

Which is better gypsum board or HardiFlex?

The similar features for both boards are good insulation, fire resistant, non-causing, and toxic substances but the clear differences are that gypsum board is more suitable for interior work as for the reason that the gypsum board is produced from compact gypsum mineral powder which is very fragile, therefore plaster

28 Related Question Answers Found

What is HardiFlex used for?

Hardiflex Ceilings are flexible and may be used in curved seamless and panelized or tiled designs. It can also be used for wet area applications (such as areas of bathroom, kitchen, laundry area).

Is HardiFlex termite proof?

Hardiflex Building Board Information. HardiFlex building boards are as durable as they are adaptable - they will not burn, are resistant to permanent water and termite damage and when installed as directed, are resistant to rot and warping.

Can HardiFlex get wet?

Its designed to handle water and will be fine. The cons of using wet hardiflex is it bends easier and is heavier but will dry out.

Is Shera board waterproof?

SHERA products are made from fibre cement. Additional properties of fibre cement are: Fire resistant. Water resistant.

Is cement board stronger than plywood?


Cement backerboard is more stable than plywood in high humidity and other wet environments. It won't swell and buckle the way that plywood does, so it's safe to use in mudrooms and bathrooms where things like spills and puddles are normal, as well as in areas with high levels of moisture in the air.

Is HardiFlex contain asbestos?

Free of asbestos, HardiFlex® Senepa cement fascia board is resistant to damage caused by fire, moisture, termite infestation, humidity, hot weather and cold and windy climates — when installed and maintained correctly.

Is HardiFlex fire rated?

Durable. Engineered to endure. Hardie's fibre cement is resistant to fire, termites, rot and damage from moisture.

Can you use Hardiflex for flooring?

Answer. No, HardieFlex® Flooring is meant to be a flooring substrate for internal residential applications. Using it as the finished flooring will scratch the coating of the board and damage the board itself, so a floor finish such as tiles, vinyl, wood laminates, or carpet must be laid over it.

Which is cheaper plywood or gypsum board?

Lower weight – Plywood is actually lower weight than a comparable sheet of drywall. A 5/8″ sheet of drywall weighs 2.75 pounds per square feet, while a 5/8″ sheet of plywood weighs from 1.8 to 2.1 pounds, depending on the type of plywood. Resisting damage – Plywood is considerably stronger than drywall.

Is gypsum board good for ceiling?


The biggest advantage of going for a gypsum ceiling is that it is a quick and clean method of installation that generates less dust during execution. Gypsum board is an excellent fire-resistive building material.

Can you use plywood instead of drywall?

Plywood is a viable alternative to drywall for walls and ceilings. If you are planning on redoing your walls or ceilings, the typical materials you'll use include Sheetrock or finished plywood. Each has its benefits as a building material and in some cases, finished plywood is the better alternative.

Which is better gypsum board or plywood?

Drywall offers superior fire resistance compared to plywood, making it the safer wall finish in most applications.

What is the standard size of plywood in the Philippines?

Plywood manufacturers use lauan -- sometimes called Philippine mahogany -- to make a utility-grade plywood for cabinetry and interior woodwork. It comes in standard 4- by 8-foot sheets with thicknesses of 1/8, 1/4, 5/16 and 3/4 inches.

Is cement board fire rated?

Yes, HardieBacker® 1/4" Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace. This does not mean that clearances to combustible building materials can be reduced by using HardieBacker 1/4".

Is cement board a good insulator?


Siding Blog
The majority of siding products are not good insulators by themselves. Most siding, including fiber cement have an R-value of less than 1 when installed alone with out additional layers or types of insulation. This means as a stand alone product fiber cement isn't going to add much insulation to your home.

Is gypsum a good insulator?

When it contacts with fire, the evaporation of crystal water will absorb heat and generate anhydrous gypsum which has good thermal insulation. The thicker its products are, the better their fire resistance will be.

Is gypsum board termite proof?

In most cases, it has been found that termites cause damage to gypsum boards and hence affect the products made from this material. If you want termite-resistant material for your false ceiling, you may opt for fiber cement board. There is currently no termite activity.