What is the effect of configuring the ipv6 Unicast routing command on a router?

Category: technology and computing computer networking
3.9/5 (435 Views . 23 Votes)
What is the effect of configuring the ipv6 unicast-routing command on a router? Explanation: When the ipv6 unicast-routing command is implemented on a router, it enables the router as an IPv6 router. Use of this command also assigns the router to the all-routers multicast group.



Consequently, what are two functions of a router?

The two functions of a router are forwarding data packets toward their destination and acting as an intersection between multiple IP networks.

Additionally, why would a summarized static route be configured on a router? A summary route represents multiple networks. A summarized static route does not necessarily provide a better route than a routing protocol does. A default static route would provide a default gateway for a router that is connected to an ISP.

Likewise, people ask, when a router receives a packet what information must be examined?

When a router receives a packet, what information must be examined in order for the packet to be forwarded to a remote destination? Explain:When a router receives a packet, it examines the destination address of the packet and uses the routing table to search for the best path to that network. 11.

What happens to a static route entry in a routing table when the outgoing interface associated with that route goes into the down state?

When the interface associated with a static route goes down, the router will remove the route because it is no longer valid. 9. The network administrator configures the router with the ip route 172.16.

38 Related Question Answers Found

What's inside a router?

A router is a networking device that forwards data packets between computer networks. Routers perform the traffic directing functions on the Internet. Data sent through the internet, such as a web page or email, is in the form of data packets.

What is default gateway IP?

Ad. In the networking world, a default gateway is an IP address that traffic gets sent to when it's bound for a destination outside the current network. On most home and small business networks—where you have a single router and several connected devices—the router's private IP address is the default gateway.

What is router and its benefits?

Advantages of Routers:
Routers can connect different network architectures, such as Ethernet and Token Ring. Router can choose the best path across an internetwork using dynamic routing techniques. Routers reduce network traffic by creating collision domains. Routers reduce network traffic by creating broadcast domains.

What is router and switch?

The most basic explanation is that a switch is designed to connect computers within a network, while a router is designed to connect multiple networks together. Even though routers and switches are different, they can be used interchangeably. For example, a router typically has several LAN ports and a single WAN port.

What is the function of modem?

Modem stands for MOdulator/DEModulator. A modem converts digital signals generated by the computer into analog signals which can be transmitted over a telephone or cable line and transforms incoming analog signals into their digital equivalents.

What information is stored on a router?

Yes, your router does store information about your computer when you connect to it. Typically, it will save a routing table that consists of your computer's MAC address, the IP address that was assigned to your computer, and the lease time of your computer's IP address.

What is the difference between a router and a modem?

In short, your router creates a network between the computers in your home, while your modem connects that network—and thus the computers on it—to the internet. When you connect to Wi-Fi, you're really connecting to your router, which forwards traffic between the internet and your computer.

What is the purpose of a routing protocol?

A routing protocol specifies how routers communicate with each other, distributing information that enables them to select routes between any two nodes on a computer network. Routing algorithms determine the specific choice of route. Each router has a prior knowledge only of networks attached to it directly.

What are two characteristics of IP choose two?


What are two characteristics of IP? (Choose two.)
  • does not require a dedicated end-to-end connection.
  • operates independently of the network media.
  • retransmits packets if errors occur.
  • re-assembles out of order packets into the correct order at the receiver end.
  • guarantees delivery of packets. Explanation:

What are two features of Arp choose two?

What are two features of ARP? (Choose two.) If a host is ready to send a packet to a local destination device and it has the IP address but not the MAC address of the destination, it generates an ARP broadcast.

Which route will a router use to forward an IPv4 Packet after examining its routing table for the best match with the destination address?

The A level 1 ultimate route is the route that a router would use to forward an IPv4 packet after examining its routing table for the best match with the destination address.

Which two basic functions are performed by network security tools?

Network Security Tools and Testing (2.2.
Security auditing and penetration testing are two basic functions that network security tools perform.

Which packet forwarding method does a router?

Which packet-forwarding method does a router use to make switching decisions when it is using a forwarding information base and an adjacency table? Explanation: Cisco Express Forwarding (CEF) is the fastest and preferred switching method. It uses a FIB and an adjacency table to perform the task of packet switching.

What is a gateway of last resort?


A Gateway of Last Resort or Default gateway is a route used by the router when no other known route exists to transmit the IP packet. Known routes are present in the routing table. Hence, any route not known by the routing table is forwarded to the default route.

What is the significant difference between a hub and a Layer 2 LAN switch?

Hubs and switches are devices that we use to interconnect our computers in LANs. The main difference between a hub and a layer 2 switch is their complexity. A hub is a very simple device that does virtually no processing and simply forwards the packets it receives.

Which two functions are primary functions of routers choose two?

Which two functions are primary functions of a router? (Choose
  • packet forwarding.
  • microsegmentation.
  • domain name resolution.
  • path selection.
  • flow control.