What is the difference in 4l60e transmissions?

The 4L60 designation means that the transmissions are four gears, which are longitudinally positioned. The difference between the 4L60E and 4L60E here is that the 4L60 transmission has a configuration of a four bolt pattern.

Considering this, are 4l60e transmissions all the same?

No they are not. More importantly, not all 4L60E transmission are compatible with one another.

One may also ask, what vehicles use the 4l60e transmission? 4L60E Transmission Details The 4L60E transmission was widely available in a large number of GM truck, van, and SUV applications, as well as in rear-wheel drive car applications. Some of the most popular car applications were the Chevrolet Corvette, Camaro, Caprice, and Impala, just to name a few.

Considering this, what years will a 4l60e transmission fit?

The transmission has a square oil pan. The key distinction of the Later 4L60-E (1996-2010) from the Early 4L60-E (1992-1997), 4L60 (1990-1992), or 700R4 (1982-1989) is the six-bolt "hex" rear output or tailhousing / adapter pattern.

Is a 4l60e a good transmission?

GM 4L60E Transmissions Are Some of the Best on the Market The 4L60E is an automatic shift, four-speed overdrive transmission that has the reputation of being one of the best automatic transmissions ever made. Before the 4L60E was produced, there was another trans called the Turbo 700R4.

38 Related Question Answers Found

Will a 5.3 bolt up to a 4l60e?

Most 5.3's came with a 4l60e behind them, so YES, they fit. Look for one from the "LS years" meaning 2000+ which will have all the correct bell housing bolt holes. You need to find a 2wd tranny as well, otherwise the tail shaft will have to be swapped out to work.

Will a 4l60e bolt up to a 350?

Premium Member. The 4L60E will bolt straight up to your 350. :yes: You will need some way to control the tranny though. The OD is electronically controlled, hence the "E" at the end of the 4L60.

How much horsepower can a 4l60e handle?

1,000 horsepower

What does a 4l60e need to work?

Externally, all it needs is a 12-volt source and an engine-vacuum reference. However, if your trans is, in fact, a 4L60E, running it off a computer is mandatory. On "E" transmissions, the computer controls everything: TCC lockup, gear changes, shift quality and firmness, and line pressure.

Why is the 4l60e a bad transmission?

the transmissions break because of lubrication problems. you have to drill feed holes and such. the strongest components you can get will break if they're overheating because no tranny fluid is getting to them. you have a max evil trans, which is just a 4L60E thrown together with better parts.

Can I put a 4l80e in place of a 4l60e?

4l60e to 4l80e swap kit. Swapping from the 4L60E to the 4L80E is not difficult to do in vehicles that were equipped with both transmissions. It's not the easiest swap to do, and a 4L60E can handle a lot of power on its own.

Which is better 700r4 or 4l60e?

70 The difference between the two is the 4L60E is computer controled while the 700R4 is cable controlled from the TV cable at the throttle body. There might be some differences with the clutch packs and other stuff, but even different year 700R4's have different clutch packs.

Can I put a 4l65e in place of a 4l60e?

Are they Interchangeable? The 4L65E was designed with the LS V8 engines in mind. They are not directly compatible with the 4L60E because they use a different torque converter and input shaft. So if you are going to use a 4L65E make sure that you get the 300mm torque converter with it.

How much does it cost to rebuild a 4l60e transmission?

Cost of Having a shop Rebuild the 4L60E

If you have a shop pull, rebuild, and reinstall the transmission it can cost anywhere from $2000-$4000.

What's the difference between 4l60 and 4l60e?

4L60E vs 4L60: Biggest Differences

The biggest difference between the 4L60 and 4L60E is how they are controlled. The 4L60E is controlled by a computer, while the 4L60 is controlled by a TV cable. On the other hand, a 4L60 would need a custom bracket to hook into the TV cable properly.

Do I have a 4l60e or 4l80e?

The size & weight. The biggest difference is probably the size & the weight between the 4L60E and the 4L80e transmission. The 4L80e is much larger and heavier than the 4L60E. The 4L60E has a weight of 150 lbs without fluid and the length of 23.5″, while the 4L80e have the weight of 236 lbs and the length of 26.4″.

Will a 4l60 replace a 4l60e?

Re: Swap 4l60 with 4l60E

It's possible but the 4l60E requires a computer to operate. You would have to figure out a way to use a 94 or later PCM or get a stand alone computer to operate the transmission.

Can you use a 4wd 4l60e in a 2wd?

The 4WD version is a completely different animal. There is no tail housing and the output shaft is shorter so it won't work with a 2WD tail housing. To use a 4WD trans in a 2WD application requires a complete tear down to replace the output shaft to the 2WD unit. Then a tail shaft has to be installed, etc, etc.

What does 4l60e stand for?

4L60E Identification. The 4L60E transmission has been in production for over twenty years, even longer if you consider the fact that it came from the 4L60 (700R4). The 4L60 got the E at the end whenever control of the transmission was switched to the engine computer. The E stands for “electronic” or electronic shift.

How strong is a 4l60e transmission?

The 4L60E is rated to handle up to 360 ft·lbf (488 N·m) of torque. It weighs 133 pounds without transmission fluid.

Does VIN number tell your transmission?

Vehicle Identification Number – VIN NUMBER

This is a 17-character number that uniquely identifies the transmission type, factory installed engine, where it was built, among other details. The VIN can be found at on the door tag on the driver's door, or on a metal dash plaque found on the dashboard.

How many quarts does a 4l60e take?

6 quarts