What is dovetail chisel?

Asked By: Annabell Adelkhanyan | Last Updated: 12th June, 2020
Category: hobbies and interests woodworking
4.8/5 (194 Views . 39 Votes)
Blue Spruce Toolworks Dovetail Chisels are specialty chisels designed for the light chopping, paring and precision fitting of your finest joinery. The unique concave side bevels allow the chisel to pare right into the tightest corners of dovetail joints and give a refined, elegant look to the chisels.

Click to see full answer


Also question is, which chisel is used for dovetail joints?

The blade of these dovetail chisels is triangular in section. This shape allows the chisels to be used to cut in tight corners, like dovetail joints, where the shape of a normal chisel prevents it from being used.

Dovetail Chisels - Umeki Nomi.

Blade width Blade thickness CodePrice
42 mm 6 mm 309578 € 69.00

Similarly, how do dovetail joints work? Noted for its resistance to being pulled apart (tensile strength), the dovetail joint is commonly used to join the sides of a drawer to the front. A series of 'pins' cut to extend from the end of one board interlock with a series of 'tails' cut into the end of another board. The pins and tails have a trapezoidal shape.

Also Know, what is a mortising chisel?

A mortiser or morticer is a specialized woodworking machine used to cut square or rectangular holes in a piece of lumber (timber), such as a mortise in a mortise and tenon joint.

Which chisel should never be used with a mallet?

Paring chisels The long thin blades are flexible and the cutting edge is sharpened to the low 15º angle to provide the smoothest of cuts. These tools almost always have tang handles and are never struck with a mallet.

34 Related Question Answers Found

What are the types of chisels?

Below is a guide to the most common types of wood chisel and their uses.
  • Firmer Chisel. The definition of a firmer chisel has changed over the years.
  • Bench Chisel. Bench chisels are the first port of call with wood chisels.
  • Butt Chisel.
  • Pairing Chisel.
  • Mortise Chisel.
  • Dovetail Chisel.
  • Corner Chisel.
  • Framing Chisel.

What is a firmer chisel used for?

FIRMER chisels have a blade with a rectangular cross-section. This means that they are stronger and can be used for tougher/heavier work. A PARING chisel is a longer, thinner chisel which can be pushed into long joints such as housing joints. It is used for cleaning up the joint and to make it an accurate fit.

What is the difference between a hot chisel and a cold chisel?

A hot chisel is exclusively used in blacksmithing. It is used to cut and shape red-hot steel pieces. They are of roughly the same size and shape as cold chisels, but feature a blade that is cut at a 30-degree angle, making them virtually useless for other cutting tasks.

Which chisel used for cutting keyways?

cape chisel is a cold chisel that has a long taper on the top and bottom of the cutting end and a narrow edge and is used for cutting keyways and similar flat grooves.

What is a brick chisel?


Brick Chisel.
Also called a bolster or brick set, the brick chisel is used to make smooth cuts on bricks. Rough cutting of brick is usually done with a brick hammer (which has a chisel-like blade opposite the face of the hammer). Cutting a brick with a brick set isn't complicated.

What type of chisel is used for concrete?

Sometimes known as a masonry chisel, the mason's chisel is used to cut through materials such as stone, concrete and brick.

How do you use cold chisel tool?

Always use a cold chisel that's slightly wider than what you're cutting. Wet the chisel's edge with a drop of machine oil. That lubrication helps it slip through hardened metal grains. Hold the chisel with your thumb and index finger (as shown), place the edge on the metal, and strike it with a ball-peen hammer.

What are the types of chisel?

The Different Types:
  • Beveled Edge Bence Chisels. If you are a woodworker that makes furniture or cabinets, there is no getting around the need for a set of beveled edge bench chisels.
  • Heavy Duty Beveled Edge Chisel.
  • 3. Japanese Bench Tools.
  • Mortise Chisel.
  • Sash Mortise Chisel.
  • Paring Chisels.

How does a mortise chisel work?

A chisel used to cut a mortise is shaped differently than one used for general woodworking. If you're talking about the type that's used with a drill press, then the drill bit inside the chisel removes the bulk of the material while the chisel on the outside squares up the edges/corners.

Do I need a mortise chisel?


You don't need them, but they sure are nice. Another vote for the Narex mortise chisels. The thing is with chisels for cutting mortices there are so many options. A mortice can be rapidly cut with a bevel edge chisel, you just have to think more about paring the wood rater than levering.

Can a drill press be used as a mortiser?

A mortiser has a square chisel with a drill bit inside that drills the hole and cuts the square edges of the mortise simultaneously. If you don't have a mortiser, you can use your drill press to cut out the majority of the stock in the mortise, and then square up the mortise's edges with a sharp chisel.

How do you use a door chisel?

To cut hinge mortises on a door:
  1. Screw the hinge to the door or jamb.
  2. Score around the outline of the hinge with a utility knife.
  3. Remove the hinge from the door or jamb.
  4. Position the chisel on the scored line with the chisel perpendicular to the door or jamb and the bevel side of the chisel facing toward the mortise.

What are the different types of wood chisels?

Here are the basic three types of wood chisels:
  • BENCH CHISELS. Bench chisels are multi-purpose woodworking chisels that are used so often that they usually “sit on the bench” and are used for chopping and paring the wood.
  • MORTISE CHISELS.
  • PARING CHISELS.

When did they stop making dovetail furniture?

“There's no hard and fast rule, but hand dovetailing was really no longer done in factories after that date,” Masaschi says. Hand dovetails are slightly irregular and the pins are thin and tapered. Wider, uniform machine-cut dovetails were common in factory-made pieces from 1890 until the modern era.

What are the advantages and disadvantages of a dovetail joint?


The disadvantages of dovetail joints are that they can be fairly difficult to mark out and cut, and if they are made badly these joints lose the advantages listed above. Depending on the project, function, and design, there are a number of different types of dovetail joints to choose from.

What angle is a dovetail joint?

Lower (7° to 9°) angles are often advised for joining hardwoods, while higher angles (10° to 14°) are recommended for softwoods and even higher angles (14° to 18°) for half-blind dovetails.

Are dovetail joints better?

For this test, the box joint proved stronger. Plus, the box joint is strong in both directions, whereas the dovetails are useful only for pulling from one piece, but not the other. So really, to use a dovetail joint for the sake of strength is obsolete, mostly on account of the strength of wood glues.