What is antenna cable connection?

Asked By: Basilides Kartoziya | Last Updated: 24th June, 2020
Category: music and audio tv and film podcasts
4.9/5 (900 Views . 15 Votes)
A TV aerial plug is a colloquial name for a connector used to connect coaxial cables with each other and with terrestrial VHF/UHF roof antennas, antenna signal amplifiers, CATV distribution equipment, TV sets and FM / DAB-radio receivers.

Click to see full answer


Regarding this, what cable do I need for antenna?

The three most commonly used coaxial cable types for video applications are RG59/U, RG6/U and RG11/U. RG59/U is available with either solid copper or copper-clad-steel centre conductor. It's suitable for basic analog TV antenna feeds in residential applications and for basic CCTV systems over short cable runs.

Secondly, can cable and antenna on same line? Because back in the bad old days, you most certainly could get a cable signal and your internet through the same coax line. But when it comes to running coax from an outdoor, over-the-air antenna and your cable internet into a single line into your home — well, you just can't do it.

Considering this, how do I connect an antenna to a coaxial cable?

How to Hook an Antenna to a Coaxial Cable

  1. Step 1 – Buy the Grounding Block.
  2. Step 2 – Ground the Device.
  3. Step 3 – Connect the Ribbon Cables.
  4. Step 4 – Connect the Coaxial Cable.
  5. Step 5 – Connect the Cable to Your TV.
  6. Step 6 – Connect the Converter.
  7. Step 7 – Connect the Female End.
  8. Step 8 – Untangle the Cable.

Are there antennas that pick up cable channels?

The truth is, there is no such thing as a TV antenna that picks up cable channels…in the literal sense anyway. That said, this doesn't mean you won't be able to pickup these same “cable-like” over-the-air television broadcast channels such as, ABC, NBC, CBS, FOX and many others.

31 Related Question Answers Found

Can house wiring be used as a TV antenna?

The wiring in your home can act as a giant antenna and pick up broadcast signals for your entertainment. By plugging a coaxial cable into a wall adapter, you can use your home wiring as an antenna. Then, tune your TV or radio to pick up broadcast stations.

Why is my antenna not finding channels?

Possible causes: Once you have properly installed the antenna, changed the input on your TV to 'ANTENNA', and run a channel scan, you should be receiving at least some of your local channels. If this is not the case, the reason could be one of the following: There is not a clear line of sight to the broadcast towers.

How do I connect cable TV without coaxial cable?

How to Connect the Antenna to a TV Without Coax
  1. Connect the coaxial cable in the “RF IN” port of your TV.
  2. Connect the other end of the output to the antenna.
  3. Do proper tightening of the metal cable at each side of the coaxial cable so that you don't lose any power.
  4. Plug the power into the indoor antenna.

How can I connect cable TV without box?

Connecting an antenna or cable TV (no box)
  1. Make sure that your TV's power adapter is unplugged and all connected equipment is turned off.
  2. Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the antenna or cable TV wall jack.
  3. Plug your TV's power adapter into a power outlet, then turn on your TV.

Can a coaxial cable be used as an antenna?


Yes, you can connect your TV antenna to your cable TV wiring system. If your home is wired for cable TV and you want to cut the cord and drop cable in favor of a TV antenna the same coax cable can be used for the TV antenna.

Is Foxtel cable the same as antenna cable?

Unless you are subscribed to foxtel the point should not work as it is a different cable type than a standard antenna cable. If you don't have any other tv antenna wall points, then have a look to see if there is an antenna on the roof. (don't get it confused with a foxtel satellite dish).

What coaxial cable is best for HDTV?

Coaxial cable designed for domestic television should be 75 Ohm, with RG-6 coaxial being ideal for TV. The best coaxial cable for HDTV is RG-11. This type of cable offers a higher gauge than others, which provides more space for signals to transfer.

Which TV antenna cable is best?

Our Top 12 Best Coaxial Cable Reviews
  1. Mediabridge Tri-Shield Coaxial Cable.
  2. AmazonBasics CL2-Rated Coaxial TV Cable.
  3. Cable Matters 3-Pack CL2 Coaxial Cable.
  4. THE CIMPLE CO - 50' Feet, White RG6 Coaxial Cable.
  5. AmazonBasics Digital Audio Coaxial Cable.
  6. Ultra Clarity Cables Triple Shielded Coaxial Cable.

How much does a TV cable cost?

Price Ranges for Cable TV
The limited basic cable service from Comcast costs about $24 a month; its highest level plan starts at $85 per month. At Time Warner, the Starter TV level costs about $20 per month, with additional service levels costing between $30 and $80 a month.

What is a Flylead cable?


An Aerial Flylead is used to connect from a TV aerial socket on the wall to an aerial input socket on a TV or set-top box. They are also used to connect set-top boxes and recorders to TV sets. These will have a male aerial plug at each end.

How do you hook up an old TV antenna?

Locate the antenna "in" coaxial port on the back of your HDTV or on your digital-to-analog converter box. Plug the antenna cable into this port. You may need to screw it into place in a clockwise direction. Turn on the television and the converter box (if needed) and scan for available channels.

How far can you run TV antenna cable?

This will put the antenna a fair distance away from the television. (approximately 150 ft of coax). I have a signal Amplifier installed approximately Half the distance on the cable, but seem to not get as many channels as I should. with booster it should range around 50 miles, stations are about 30 miles.

Can an old satellite dish be used as an antenna?

If you have a satellite dish mounted to the roof or the side of your house, it is able to be used as an external television antenna. This will allow you to receive digital broadcast television signals that are available in your area. You will first need to obtain an amplified clip-on antenna to attach to the dish.

Can I connect an antenna to a cable box?

If you have an antenna you can not connect it to a live coax off your cable tv box you must remove all the wires from the box and use your own splitter or distribution amp to improve signals. A single wire from your cable modem should be run to the cable box outside your home.

How do I get my antenna to work?


5 Tricks for Getting the Best Possible Reception with Your Indoor Antenna
  1. Find out where the broadcast towers are in your area. Aiming your antenna at TV transmission towers can improve reception.
  2. Place the antenna in or near a window.
  3. Go high.
  4. Test different antenna placements.

How do I use my TV antenna to pick up wireless Internet?

First, connect the USB WiFi adapter and USB extension cable. Then, attach them to the inside of the metal cookware using twist-ties, tape, or hot glue. Next, plug the antenna into your computer using the extension cable. Finally, aim the antenna at a remote WiFi transmitter.

Can I use my phone as a TV antenna?

Now you can download Antenna Point on your Android smartphone or tablet. No matter what device you have, you can benefit from Antenna Point! See how many channels are available in your area, and which direction to aim your TV antenna for the best reception! Get the Antenna Point app on the App Store or Google Play.