What is an oxygen Oxymizer?

The Oxymizer pendant® is a special oxygen cannula that can be used to supply high flow long term oxygen therapy. It is compatible with a wide variety of oxygen sources. In a reservoir, the Oxymizer® stores pure oxygen so that the concentration of inhaled oxygen is increased.

Likewise, what is an Oxymizer nasal cannula?

The Oxymizer^® device is a special oxygen nasal cannula that provides a higher luminal diameter in combination with an incorporated oxygen reservoir. Aim of this prospective cross-over study was to investigate the effects of the Oxymizer^® in comparison to a conventional nasal cannula (CNC).

Similarly, how high can an Oxymizer go? Answer: The length of tubing for the Oxymizer was 7 feet and Pendant was 6 feet. The difference is not important except if the patient is on high flow from a concentrator. The driving pressure of the concentrator is about 6 psi as opposed to compressed gas which is much higher.

Correspondingly, what is an oxygen pendant?

Product Description: The Oxymizer® pendant is a disposable oxygen conserving device used in the routine nasal administration of supplemental oxygen.

What is the best nasal cannula?

Top Five Oxygen Cannulas That Assist In Proper Breathing

Salter Style 1600 Series Adult Nasal Oxygen Cannula.
Salter Style Adult Micro Nasal Cannula.
CareFusion AirLife Standard Nasal Cannula.
Salter Style Children Nasal Cannula.
Salter Oxygen Tubing Swivel Connector - Male To Male.

21 Related Question Answers Found

How does an oxygen Oxymizer work?

The Oxymizer pendant® is a special oxygen cannula that can be used to supply high flow long term oxygen therapy. In a reservoir, the Oxymizer® stores pure oxygen so that the concentration of inhaled oxygen is increased.

Does oxygen help with pulmonary fibrosis?

Oxygen therapy is commonly prescribed for patients with pulmonary fibrosis (PF). The therapy is used to treat low levels of oxygen in the blood, which is caused by scarring in the lungs. A steady flow of pure oxygen increases the concentration of oxygen in the lungs and elevates oxygen levels in the bloodstream.

What is the maximum flow rate for a nasal cannula?

Most cannulae can only provide oxygen at low flow rates—up to 5 litres per minute (L/min)—delivering an oxygen concentration of 28–44%. Rates above 5 L/min can result in discomfort to the patient, drying of the nasal passages, and possibly nose bleeds (epistaxis).

How much oxygen can you use with a nasal cannula?

Flow rates of 1-4 litres per minute are used with nasal cannulas, equating to a concentration of approximately 24-40% oxygen. Flow rates of up to 6 litres can be given but this will often cause nasal dryness and can be uncomfortable for patients (British Thoracic Society, 2008).

What oxygen mask gives the most oxygen?

Of the low-flow systems, a nonrebeather mask provides the highest concentration of oxygen and can deliver an Fi02 higher than 90% depending on the client's ventilator pattern.

Can you use humidification with an Oxymizer?

Since less total oxygen is passing over the nasal mucosa, the drying effect of oxygen is significantly less and supplementary humidification can usually be eliminated. Since excessive moisture could impede the membrane action of the OXYMIZER device, use with humidifiers should be avoided.

How does high flow nasal cannula work?

By creating a positive pressure environment, high-flow nasal cannula presses from the interior of the nasopharynx outwards. This dilates the radius of the nasopharyngeal airways and dramatically reduces the resistance to airway flow, thus increasing ventilation and oxygenation potential.

How many Litres is a simple face mask?

The recommended flow rate range of the simple mask is 6 to 10 liters per minute and the oxygen percentages vary from 40% to 60%. A minimum flow of 6 liters is necessary to help “flush” out the patients exhaled carbon dioxide which passes through the small holes on the sides of the mask previously mentioned.

How does a Venturi mask work?

Venturi masks are low-flow masks that use the Bernoulli principle to entrain room air when pure oxygen is delivered through a small orifice, resulting in a large total flow at predictable FIO2.

What is an OxyMask?

The OxyMask (Southmedic Inc, Canada) is a new face mask for oxygen delivery that uses a small 'diffuser' to concentrate and direct oxygen toward the nose and mouth, thereby delivering high concentrations of oxygen at a relatively low flow.

How long can you use a nasal cannula?

If you are only using your cannula and tubing a few hours a day, it is recommended that you change your tubing and cannula, every 3-6 months. If you use your concentrator more than a few hours a day, it is recommended to change your cannula on a monthly basis and your tubing, at least, every 2-6 months.

What is a conserving device for oxygen?

An oxygen conserving device (OCD) controls the flow of oxygen from the oxygen source to the patient. The fixed-pulse type delivers a pre-determined pulse (volume) of oxygen when the patient initiates a breath. The oxygen flow stops at a preset limit.

What is an oxygen conserving cannula?

With increasing interest in reducing the cost of oxygen therapy, we recently designed an oxygen-conserving cannula. It reduces the oxygen supply flow necessary to achieve adequate oxygen saturation, but because it requires the use of a reservoir situated under the nose, some patients find it obtrusive.

Can you humidify a non rebreather mask?

Non-rebreathing face mask

Ensure the flow rate from the wall to the mask is adequate to maintain a fully inflated reservoir bag during the whole respiratory cycle (i.e. inspiration and expiration). Non-rebreathing face mask are not designed to allow added humidification.

How long will a 2000 psi oxygen tank last?

So to use our example, 2000 psi minus 200 psi equals 1800 psi. Multiply 1800 constant 0.16 and this equals 288. Finally, divide this figure of 288 by 15 litres a minute to equal 19.2 minutes which we would usually round down. So a "D" sized cylinder will last 19 minutes at 15 litres per minute.

How long does a m2 oxygen tank last?

Each M2 Cylinder holds 40 Liters of oxygen, is about the size of a soda can. With a . 5-8 LPM continues flow regulator @ 1 LPM you get up to 40 Minuets. With the Chad Bonsai Conserver this little cylinder will last up to * 3.3 Hours at a setting of 1 pulse dose or * 1.7 Hours at a setting of 2 pulse dose.