What is a sub output on a mixer?

"Sub" output would mean an output that does have the mixed signals from. several input modules that are assigned to the "Sub" mix bus. In the. case of the Mackie example there are 8 "sub" mix busses that appear on. the console as "To Tape" outputs.

Regarding this, what is a sub mixer?

In audio a submix is a grouping of instruments or tracks that are mixed or inserted into the “main” mix as a composite signal (usually as one or two inputs). Most mixing boards have a number of subgroups that can be used to help the engineer organize different kinds of sources.

Also, how do you connect a subwoofer to a mixer? You would use "input" on the subwoofer to feed from the outputs of the mixing desk, then use "high pass out" on the subwoofer to connect your Alto's. It's not ideal, but if you don't use the headphone output on the mixer, just run a stereo 1/4" to rca y-splitter cable to the rca inputs of the subwoofer.

Just so, what is mix output?

A mix bus is a way to send or “route” one or more selections of audio to a particular place. Mix Bus is a term used in the live sound and recording worlds and is commonly associated with output channels/busses as discussed above.

What is direct out on a mixer?

Direct out. Direct out. Definition and background: A feature found on some mixing desks whereby a separate output is fed directly from the preamplifier stage of the input, independent of fader level and equalization, which can be sent to a monitor mixer or recording desk.

33 Related Question Answers Found

Can you run a mixer into another mixer?

5 Answers. You can definitely do something like that. One potential problem is not having independent monitor level controls for every channel in the additional mixer (let's call it mixer 2). If that matters to you, you can run monitor outputs through a simple two-channel passive mixer (mixer 3), for example.

What are groups on a mixing desk?

What is a Sub Group? A Subgroup is a mix bus destination where you can route channel outputs. The audio channels can be processed at that point with effects like EQ and Compression. The Subgroup fader will adjust the volume of channels that are routed to that group.

What is subgroup mixing?

Sound Mixers: Subgroups

Subgroups are a way to "pre-mix" a number of channels on a sound console before sending them to the master output mix. In the following diagram, channels 1 and 2 are assigned directly to the master output bus. For each pair, one subgroup is the left channel and the other is right.

What is Matrix surround sound?

Matrix Surround. By Sweetwater on Nov 21, 2001, 12:00 AM. An analog approach to surround sound in which third and sometimes fourth channels of sound are folded into the two front stereo channels and later partially decoded in a reverse operation. Examples are SQ, QS, and Dolby Surround.

How do I connect my mixer to my amp?

What jacks should I use to connect the mixer to my sound system?

Connect every microphone into the point box (snake).
Connect every snake XLR connector to every mic input XLR connector.
Connect the mixer main output to your picture equalizer input and join the picture output signal to your home power-amp input signal.

What is Ctrl room out?

But generally speaking the control room outs are usually for sending the signal to another place for recording or playback (ie. the lobby at a live event) and the main outs go to the main important speakers (hence the word "main").

What is the difference between aux and bus?

Thanks! An aux is used to send a varying amount of signal to somewhere else; be it an effect, etc. A buss is used when you want to control multiple tracks simultaneously to either adjust level or add signal processing.

What are the 6 parts of a sound system?

Parts of a sound system

Microphone (wired and/or wireless)
Mixer.
Power amplifier.
Loudspeaker.
All the necessary cabling.

What are auxiliaries on a mixing desk?

Sound Mixers: Auxiliary Channels. Most sound desks include one or more auxiliary channels (often referred to as aux channels for short). This feature allows you to send a secondary feed of an input channel's audio signal to another destination, independent of the channel's main output.

What are busses on a mixing desk?

A bus is basically a path in which you can route one or more audio signals to a particular destination. Destinations can include groups, auxiliary sends, stereo mix, foldback or monitor.

What is the insert input on a mixer?

In audio processing and sound reinforcement, an insert is an access point built into the mixing console, allowing the audio engineer to add external line level devices into the signal flow between the microphone preamplifier and the mix bus.

How does a mixing console work?

Put simply, a mixer (sometimes known as a mixing desk, mixing console, mixing board, desk or console) takes various audio sources through its multiple input channels, adjust levels and other attributes of the sound, then usually combine them to a lesser number of outputs.

How many channels do I need on my mixer?

You don't need any channels of mixer. If you want to mix on a console instead of in the box, you'll probably want at least 24 channels. Tracks from a single mic only need one channel, but reverb returns and such need two.

Why do subwoofers have 2 inputs?

Dual input allows the subwoofer an extra sensitivity adjustment. Normally, it would be enough to use a mono LFE subwoofer signal from its processor. If you have a processor with very low output so you can use a Y-splitter. By using both inputs with the same mono signal doubles the subwoofer sensitivity.

Should sound come out of a subwoofer?

Is sound supposed to come out of a subwoofer? Only if it is on, and the volume up. Subs are speakers, so, yes, they will produce sound when there is something within their bandwidth to be played.

Can you use a subwoofer as a speaker?

The difference between subwoofers and speakers basically pertains to their frequency range then. While subwoofers are used for the lowest part of the audio spectrum and are perfect for bass sounds, there is no such restriction with speakers and they deliver high frequencies, like mid-and treble range, to perfection.

What is a passive subwoofer?

Subwoofers come in two varieties: passive and active. A passive subwoofer is just a woofer or woofers in an enclosure that must be driven by an external amplifier. A better way of driving the passive subwoofer is with an electronic crossover and separate power amplifier.