What is a struck by accident?

Asked By: Vakhtang Teppler | Last Updated: 26th May, 2020
Category: medical health first aid
4.4/5 (27 Views . 15 Votes)
Caught In/Struck By Hazards. “Caught in or between” and “struck by” hazards are two of OSHA's Focus Four. These types of incidents continue to cause many fatalities and serious injuries annually. A struck by injury is caused by forcible contact or impact between the injured person and an object or piece of equipment.

Click to see full answer

Similarly one may ask, what are the four common types of struck by hazards?

This is due to the numerous hazards that can create struck-by injuries. There are four common struck-by hazards in construction: struck-by flying objects, struck-by falling objects, struck-by swinging objects and struck-by rolling objects.

Furthermore, how do you avoid getting hit by accident? Some additional useful tips to help avoid struck-by accidents include:

  1. Workers should always wear proper PPE such as hard hats, safety glasses, goggles and face shields to help protect from workers from falling objects.
  2. Strive to maintain a safe distance outside of the swing radius for cranes and backhoes.

One may also ask, what is the definition of a struck by hazard?

Struck-by injuries are produced by an object that forcibly impacts a person. It is important to point out that in construction, struck-by hazards can resemble caught-in or -between hazards. When the impact alone creates the injury, the event is considered as a Struck accident.

How many deaths were caused by being struck by the crane load or other parts?

Of the total 632 crane-related deaths, 157 were caused by overhead power line electrocutions (25%), 132 deaths were associated with workers being struck by crane loads, 125 deaths involved being struck by cranes, crane booms/jibs or other crane parts (20%), 89 deaths involved crane collapses (14%), 56 deaths involved

28 Related Question Answers Found

What are the focus four hazards?

These online safety courses focus on OSHA Fatal Four Hazards which include Electrical Hazards, Fall Hazards, Struck-By Hazards and Caught-In or -Between Hazards.

What height is fall protection?

OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.

What causes Construction Accidents?

Common causes of construction site accidents include:
  • Lack offall protection for workers on elevated structures.
  • Lack of protection for people on the ground fromfalling objects.
  • Tripping hazards from construction materials and debris.
  • Missing guards or protections on power tools.
  • Unsafe equipment.

How many categories of struck by hazards are there?

There are four types of struck by hazards: Struck-by flying object, Struck-by falling object, Struck-by swinging object, and Struck-by rolling object. Flying object hazard exists when something has been thrown, hurled, or is being propelled across space.

What is the best way to protect yourself from getting caught in power tools?

To prevent hazards associated with the use of power tools, OSHA recommends that workers should observe the following general precautions:
  1. Never carry a tool by the cord or hose.
  2. Never yank the cord or the hose to disconnect it from the receptacle.
  3. Keep cords and hoses away from heat, oil, and sharp edges.

What is the leading cause of worker fatalities each year?

According to OSHA, the leading causes of worker deaths on construction sites were falls, electrocution, struck-by-object and caught-in/between. These "Fatal Four" were responsible for more than 58% of the construction deaths in 2014.

What is a hazard according to OSHA?

A hazard is any source of potential damage, harm or adverse health effects on something or someone. The CSA Z1002 Standard "Occupational health and safety - Hazard identification and elimination and risk assessment and control" uses the following terms: Harm - physical injury or damage to health.

What are the hazards of power tools?

Hazards to the user include projectiles, contact, noise, vibration and entanglement. Always wear appropriate PPE to protect you from the specific hazards presented by power tools, such as dust exposure and projectiles. PPE such as goggles, dust mask, gloves, hard hat, and safety boots should be worn where appropriate.

Which one is an example of struck by flying hazard?

Struck-by flying objects are grinding or striking resources that can make flying object hazards. An example is air pressurized directly above 30 psi can effort oils and other particles over your skin.

Which of the following are examples of caught in or between hazards?

Caught-in or –Between hazards cause crushing injuries when a person is squeezed, caught, crushed, pinched, or compressed between two or more objects. This may include: Being crushed in equipment • Being crushed between mashing objects or a moving and stationary object • Being crushed between two or more moving objects.

How can construction hazards be prevented?

How to Prevent an Accident at Construction Site
  1. Provide safety training for all employees.
  2. Hold frequent crew safety meetings.
  3. Utilize protective clothing and gear.
  4. Keep the workspace clean.
  5. Maintain the equipment and tools.
  6. Prevent falls.
  7. Recognize the hazards and make a plan.
  8. Be careful with vehicles.

What is Construction OSHA?

OSHA's regulations define "construction work" as "construction, alteration, and/or repair, including painting and decorating." at 29 CFR 1926.32(g) and 29 CFR 1910.12(b). (1) all types of work done on a particular building or work at the site thereof * * * 29 CFR 5.2(i) and (j).

What is the maximum number of feet a safety net?

"Safety nets must be installed as close as practicable under the surface on which employees are working, but in no case more than 30 feet below."

What is a fatal four event?

The Fatal Four consist of falls, electrical exposure, struck-by and caught-in/between situations, and resulted in 545 worker fatalities in the United States in FY 2016. The Bureau of Labor Statistics (BLS) estimate that 631 workers' lives would be saved in America every year by eliminating the Fatal Four.

What is the swing radius of a crane?

The swing radius of the rear of cranes shall be barricaded in such a manner as to prevent personnel from being struck or crushed by the crane. The barricade must include the maximun swing radius of the counterweight, which typically is past the main body of the crane.

How can we prevent falling objects in the workplace?

Tips for Preventing Falling Object Injuries
  1. Use tool lanyards to prevent tools from falling.
  2. Keep all material at least 3 feet from a leading edge, other than material specifically required for work in process.
  3. Remove items from all loose or unsealed pockets, especially top shirt pockets, such as phones, pens, and tools.
  4. Do not hang objects over guardrails.

What is the 4th leading cause of death among construction workers a electrocution B falls C struck by hazards D traffic accidents?

Data from the U.S. Bureau of Labor Statistics (BLS) show that electrocution was the fourth leading cause of death in construction in 2005, after falls to a lower level, transportation injuries, and being struck by objects and equipment.