What is a stitch selector?

Asked By: Tewfik Oyambide | Last Updated: 2nd March, 2020
Category: hobbies and interests needlework
4.3/5 (689 Views . 14 Votes)
Stitch Selector.
Allows you to choose the specific stitch you want to use for your project. Different projects will require different stitches. You can also use the stitch selector to select one of the decorative stitches built into your sewing machine.

Click to see full answer

Furthermore, what is a stitch selection panel?

Published on Jan 8, 2015. The Push Button Stitch Selection feature allows you to choose your stitch quickly and easily. Simply find the stitch number on the stitch panel and program it in. The optimum stitch length and stitch width are pre-set, so you can just start sewing.

Also Know, what is a normal stitch length? The average stitch length is 2.5mm. This is the typical setting on newer sewing machines. Older machines usually give you a range of about 4 to 60 which tells you how many stitches per inch; the equivalent of 2.5mm is about 10-12 stitches per inch. Comparing Stitch Lengths for Straight Stitches.

Simply so, what is a reverse stitch control?

adjusts the amount of pressure the presser foot applies to the fabric. reverse stitch control. allows the machine to back-stitch. spool pin. holds the spool of thread.

What controls the length of a stitch on a sewing machine?


Term Handwheel Definition Controls the up and down movement of the needle and thread take-up lever by hand.
Term Tension control Definition Adjusts the tightness or looseness of the upper thread.
Term Stitch length control Definition Used to adjust stitches from short to long.

39 Related Question Answers Found

What is the thing that holds thread called?

Spool Pin (or Spool Holder).
A spindle on top of your sewing machine that holds a spool of thread.

What are the parts and functions of sewing machine?

Functions of Sewing Machine Parts:
  • Spool pin: The main function of spool pin is to hold the spool of thread.
  • Bobbin binder spindle: During winding, bobbin is placed here.
  • Bobbin winder stopper:
  • Stitch width dial:
  • Pattern selector dial:
  • Hand wheel:
  • Stitch length dial:
  • Reverse stitch lever:

What causes a lockstitch to form?

Lockstitch is so named because the two threads, upper and lower, "lock" (entwine) together in the hole in the fabric which they pass through. Then the take-up arm pulls the excess upper thread (from the bobbin area) back to the top, forming the lockstitch.

What does BH mean on a sewing machine?

A vibrating shuttle is a bobbin driver design used in home lockstitch sewing machines during the second half of the 19th century and the first half of the 20th century.

What do the numbers on the stitch length control indicate?

What do the numbers on stitch length control indicate? On most modern sewing machines, the stitch length control indicates the length of a single stitch is in millimetres. So a length of 3.0 means each stitch is 3mm long (or just under 1/8").

What is a reverse lever on a sewing machine?

The reverse lever is the part of the sewing machines that makes sewing backward possible. This function is essential when stitching since it allows you to secure your stitch at the beginning. The reverse stitch is also necessary when finishing up a seam.

What is a presser foot used for?

A presser foot is an attachment used with sewing machines to hold fabric flat as it is fed through the machine and stitched.

Can you reverse stitch with a walking foot?

REVERSE SEWING: The foot isn't designed for use in reverse. foot assists in forward movement and won't allow the fabric to move side to side. SOME DECORATIVE STITCHES: Wide decorative stitches require side to side fabric motion, which is inhibited by the walking foot.

What is used to hold two pieces of fabric together?

stitch a 1/2" line from the edge of the fabric in the direction of the arrows. the distance between the cut edge of the fabric and stitching line. machine basting. a temporary stitch used to hold two pieces of fabric together before permanent stitching is done.

What is a needle clamp?

Needle clamp for sewing machine, particularly child's sewing machine, with the needle clamp knob located between the parallel needle and presser bars. The clamp knob and screw extend from the needle bar to strike the presser bar when retracted from the sewing needle, thereby preventing loss of the clamp screw.

What holds the needle in place?

Question Answer
Lifts and lowers the presser foot Presser Foot Lifter
Carries the thread and pierces the fabric Needle
Holds the needle in place Needle Clamp
Reverse sewing in order to secure stitches at end of seam Reverse Button

What is a spool pin?

Definition of spool pin. : a spool-shaped pin tumbler used in some cylinder locks to foil picking attempts.

What is a needle stitch plate?

The needle stitch plate found on all sewing machines is the removable metal shield inset into the work surface of your sewing machine, covering the bobbin area.

What is a narrow zigzag stitch?

For a stretch stitch, you will need to use a narrow zigzag stitch. Small adjustments to increase the width from a straight stitch to a zigzag stitch will allow the stitching to stretch with the fabric while sewing a straight seam at the same time.

What is the best stitch length for sewing a straight stitch?

2.5 - 3mm is the average stitch length range that should be used for medium weight fabrics. 4 - 5mm is the long stitch length range that should be used for basting and topstitching. Stitches for Dummies puts it this way: The average stitch length for mid-weight fabrics is 2.5 to 3 mm/10 to 12 spi.

Do you have to Backstitch a zigzag stitch?

Sew a Zigzag:
Just like with the straight stitch, now push the reverse button and sew an inch backwards (back-stitching) and then go forward again. You have now knotted your thread and can continue sewing. Again, you can still use the edge of the presser foot or the seam guides to help you sew straightly.

What is a basting stitch?

In sewing, to tack or baste is to make quick, temporary stitching intended to be removed. To easily hold a seam or trim in place until it can be permanently sewn, usually with a long running stitch made by hand or machine called a tacking stitch or basting stitch.