What is a Scotia Moulding?

Asked By: Stephen Vaculova | Last Updated: 22nd February, 2020
Category: hobbies and interests woodworking
4.1/5 (628 Views . 17 Votes)
Scotia is a decorative moulding used to cover the gap without removing the skirting. Scotia is fixed to the skirting board and over the top of the flooring around the perimeter of the wall. Scotia is of a concave design.

Click to see full answer

Considering this, what is Scotia molding?

A scotia molding is a type of molding usually installed under the nosing of each tread of a stair. The Scotia molding hides the joining between the tread and the riser of the stair. The Scotia is also the name of the concave part of a molding such as a crown molding.

Furthermore, should beading match floor or skirting? Skirting is used to cover the gap that has been left around the perimeter of the room between the new flooring and the wall (expansion gap). Beading is used to cover the expansion gap that has been left around the perimeter of the room between the new flooring and the existing skirting.

Accordingly, how do you attach Scotia trim?

Cut the Scotia sections to fit along each straight section of skirting board. To achieve a neat finish, cut each piece of trim to 45 degrees using the mitre saw. When cut and fitted in position, the Scotia should be nailed to the skirting by spacing one nail every 30cm.

What is the strip at the bottom of a wall called?

Baseboard. The molding located at the bottom of a wall. Similar to the chair rail, the baseboard is meant to hide scuffs and markings from chairs, furniture, or shoes. Baseboards are also called skirting.

39 Related Question Answers Found

What are different types of molding?

Differentiate between the types of molding most commonly used in homes today—and discover which style might be right for your residence.
  • Decorative Moldings. 1/11. Moldings exist in myriad forms.
  • Casing. 2/11.
  • Baseboard and Baseboard Styles. 3/11.
  • Crown. 4/11.
  • Chair Rail. 5/11.
  • Picture Rail. 6/11.
  • Cove. 7/11.
  • Dentil. 8/11.

What is the purpose of Moulding?

In architecture, a baseboard (also called skirting board, skirting, mopboard, floor molding, or base molding) is usually wooden or vinyl board covering the lowest part of an interior wall. Its purpose is to cover the joint between the wall surface and the floor.

What is a Scotia?

Scotia is a decorative moulding used to cover the gap without removing the skirting. Scotia is fixed to the skirting board and over the top of the flooring around the perimeter of the wall. Scotia is of a concave design.

What is molding in a house?

Webber. A common decorative flourish for traditional homes, crown molding enriches a space by forming an eye-catching transition between the walls and ceiling. But if your ceilings are high or your room has generous moldings around windows and doorways, a single strip of crown molding might get lost.

What is mid wall molding called?

Baseboard: Also called wall base, this moulding is applied around the lower perimeter of the room along a finished floor. Base Cap: A moulding applied atop a piece of base moulding flush with the wall to create a decorative look. It's sometimes used with baseboard.

How do you mold a person?

"Molded" is a metaphor for working in clay. You mold the clay into the shape you want. To mold a person's character is the same. It presumes you have sufficient influence on the subject to alter his/her character to what you think is a desirable one.

What is wood beading?

A bead is a woodworking decorative treatment applied to various elements of wooden furniture, boxes and other items. A bead is typically a rounded shape cut into a square edge to soften the edge and provide some protection against splitting. Beads can be simple round shapes, or more complex patterns.

Should I remove skirting boards before laminate flooring?

You dont need new skirting if you want your laminate under it unless the existing skirting is damaged. The people should have just taken your skirting off, laid the laminate, then replaced your skirtings on top.

How do you seal the edges of laminate flooring?

Silicone caulking these edges will ensure your laminate panels will not be warped over the years from moisture damage.
  1. Brush any debris from the flooring edges with a wire brush.
  2. Vacuum the edges to remove all debris and dust.

How do you attach skirting boards?

How to install skirting boards
  1. Cut skirting to suit length of wall, allowing extra for mitred joints.
  2. Where skirtings will meet at internal corners, you need to create a scribed joint.
  3. To mark wall for plugs, place skirting in position against wall.
  4. Remove skirting and using drill with 5mm masonry drill bit, make hole in wall where marked by nail.

How do you cut skirting boards for laminate flooring?

Need to lay a laminate floor and want it fitted neatly into the foot of the skirting board? Simply take your Dremel® DSM20 Compact Saw and flush cut into the skirting board. Cut the laminate boards with the DSM20 too: a complete job with just one tool!

How do you do floor trim?

Using a miter box or a power miter saw, cut the baseboard at a 45-degree angle. Before nailing it in place, mark the second piece the same way, and test for fitting. Use 1-1/4" or 1-1/2" brads to close the corner. When you encounter the doorway, measure the distance between the door casing and the wall.

Can you remove skirting boards without damage?

To fully remove the skirting board from the wall you will need to use the crowbar. A top tip to avoid damaging the wall behind the skirting is to place a thin block of wood between the crowbar and the wall when you are prising the skirting away from the wall.

Can you lay laminate without beading?

Without beading, it isn't possible to present a neat finish from floor to wall and you would otherwise be left with a small gap. Beading for laminate flooring can create a lovely flush finish for example.

What can you use instead of skirting boards?

A modern board with a simple profile is an alternative — and, if the board is going to be painted, you could use low-cost MDF rather than timber. Tiles laid on a floor in a hallway or bathroom can be used as a skirting to give the impression of greater width by using the same material as the floor.

Do you need to remove skirting boards to lay wood flooring?

Not running boards under skirtings and, or architraves.
It is important to take the time needed to remove skirting boards so you can run the floor under it. It will also make a big difference if you take the time to trim architraves around doors and windows so you can slide the floor board underneath it.

How do you hide expansion gaps?

How to Hide the Expansion Gap Around Your Timber Floor: Four
  1. Use baseboards. Baseboards are one of the most common and simplest ways to cover your expansion gaps.
  2. Embrace transition strips. While baseboards work in most areas, they cannot hide expansion gaps in between different types of flooring or between rooms.
  3. Rout the bottom of door frames.
  4. Allow expansion with other materials.