What height is a kitchen plinth?

The standard kitchen worktop height is 910mm from the floor to the top of the worktop. This kitchen worktop height is made up of the following standard kitchen dimensions: 150mm plinth (kickboard)

Just so, what is a plinth in a kitchen?

Plinths. A plinth, or kickboard, is often added along he bottom edge of the base units, to make them appear to stand directly on the floor, and give the kitchen a solid finished look.

Subsequently, question is, how high should a kitchen work surface be? around 900mm

Subsequently, one may also ask, what size is a kitchen plinth?

17 Answers from MyBuilder Carpenters & Joiners top of base unit should be 870mm from floor plus 40mm of worktop would normally give a finished height og 910mm. this would then allow the plinths to be fitted without cutting down.

How do you remove plinth from kitchen units?

Fashion a hook (like a letter L) from a wire coat hanger, slip this behing the plinth (kick plate) at the top - there should be enough space to slip it in, if not carefully lever a tiny gap with a screwdriver. Once in turn the hook through 90° then pull the plinth should pull away.

28 Related Question Answers Found

What is a plinth seal?

Plinth Seals provide a hygienic seal between the floor and plinth of a kitchen unit. They hide and protect the raw edges of the plinth from getting damaged and exposed to water, potentially causing the chipboard to warp. They also prevent dirt and dust from getting underneath the plinth.

What is a kitchen kickboard?

A toe kick or kickboard (in the kitchen cabinetry sense) is a fascia that fits across the recess at the bottom of a floor-mounted base cabinet; these serve to conceal the plinths / supports of cabinet leg systems.

How do you fit curved kitchen plinth?

Just stand the curved plinth in front of the cabinet, make sure the top of the plinth is PARALLEL with the bottom of the curved cabinet by packing up one end or the other of the plinth section. Then scribe the amount you need to remove with a pair of Compass's on the bottom of the curved section.

How do you remove a kickboard from a kitchen?

How to Remove a Toe Kick From Base Cabinets

Position the end of the pry bar between the top of the quarter-round molding and the toe kick board. Tap the pry bar with a hammer to loosen the molding from the toe kick.
Find a joint or an end for the toe kick to start prying.
Loosen the toe kick board across its length.

Where does the cornice go in a kitchen?

For clarification, a cornice is the cabinet trim that fixes on the top of a kitchen wall cabinets, whilst the pelmet is the smaller trim that goes around the bottom of the cabinet.

What is a plinth in construction?

Plinth beam is a reinforced concrete beam constructed between the wall and its foundation. Plinth beam is provided to prevent the extension or propagation of cracks from the foundation into the wall above when the foundation suffers from settlement.

How wide is a kitchen unit?

The most common standard width for units is 600mm, but standard carcasses are sold in widths of 300mm, 400mm, 500mm, 800mm and 1,000mm. Cabinets up to 600mm have a single door, whilst the larger sizes have two doors. Vertical dimensions vary, but work surfaces areusually fitted at a height of 910mm.

Should kitchen base units be fixed to the wall?

If your kitchen base units are standing next to each other they should be fixed to each other as well as to the wall and, at the front of the unit, this can be done by placing the fixing screw behind the hinges. Once fitted, the hinges will hide them and keep things tidy.

How high should sockets be above kitchen worktop?

The standard height of a worktop from the floor to the worktop surface is 910mm. The general rule is to then set your sockets 150mm above this (measured from worktop surface to the bottom of the socket). Added together, this means the standard socket height is 1060mm from the floor to the bottom of the socket.

How do you install a plinth block?

Place the plinth block at the base of the doorjamb on the edge of your reveal mark. If your jamb is plumb, then your plinth will be, too. If the plinth block does not fit flush, use your hammer to flatten in the plater or drywall a bit until you get your desired fit.

What is a plinth for cabinets?

Legs are required to keep the cabinet boxes off of the floor. Toe Kick: Also called a "plinth" by IKEA, this is a narrow strip of plastic that covers up the legs; these serve the same purpose as toe-kick boards found on conventional cabinets.

What are plinths?

A plinth is a base or platform that supports a pedestal, column, or structure. Structurally, the plinth distributes the weight and pressure coming down through a column evenly across a wider space. It can also elevate structures above the ground to protect them from water or other elements.

What is difference between counter height and bar height?

A counter-height bar stool is commonly 23-28 inches from the floor to the seat (23- to 28-inch seat height). Pair counter-height bar stools with 35 to 37-inch table heights. A bar-height bar stool is commonly 29-32 inches from the floor to the seat (29 to 32-inch seat height).

What is an average size kitchen?

The average small kitchen measures 70 square feet or less. The average mid-size kitchen measures 100 to 200 square feet. The average large kitchen measures over 200 square feet. It's impossible to know if you prefer a small, mid-size or big kitchen until you've cooked in all three spaces.

How high should kitchen cabinets be from countertop?

18 inches

What is standard kitchen bar counter height?

Kitchen table heights vary, but the standard table height of a kitchen table is 30 inches. Countertop height tables are typically 36 inches and bar height tables (often called pub tables) generally run around 42 inches.

How high is a kitchen counter UK?

900mm