What Dremel bit do I use to cut plastic?

Asked By: Shuang Elsholtz | Last Updated: 20th April, 2020
Category: hobbies and interests woodworking
4.4/5 (2,585 Views . 45 Votes)
Multipurpose Cutting Bit: 561
The Dremel 561 cuts hard wood up to 3/8" and soft wood up to 5/8". Also cuts plastics, fiberglass, drywall, laminate, aluminum and vinyl siding. Use with the Dremel Multipurpose Cutting Attachment (model 565).

Click to see full answer


In this regard, what tool can I use to cut plastic?

Depending on the type of plastic you need to cut through, use a fine-toothed saw, a hacksaw, or a non-melting table saw blade. You can also drill small holes to make the plastic easier to cut through, or slice through thick plastic with a piece of string.

Likewise, how do you cut a Dremel with a bit? To use a cutting wheel, you have to attach it a mandrel. Unscrew the tiny screw on top of the mandrel and remove one of the washers. Slide the wheel onto the screw, then add the second washer. Attach the screw to the mandrel base and tighten.

In this way, what Dremel bit do I use to cut wood?

The Dremel 561 is a high-speed cutter with a 1/8 in. steel shank. Ideal for cutting wood, plastic, fiberglass, drywall, laminate, aluminum and vinyl siding. This bit can be used in a variety of applications such as preparing an area for light fixtures or making cutouts in cabinets and paneling.

How do you cut hard plastic without breaking it?

-inch to cut, use a hook knife to make a straight cut on it. And the knife will do the job without breaking it. You can also use a hot knife to cut thin plastic. To cut straight a thick sheet of acrylic or polycarbonate use the circular saw.

35 Related Question Answers Found

What is the best way to cut plastic?

A Utility Knife – The Best way to Cut Thin, Softer Plastic
For thin sheet plastic, the best way to cut is using a utility knife and a straight edge to score the plastic then break it on a bench with a sharp edge. If this reminds you of cutting glass, you are correct.

What is a plastic cutting knife?

The plastic sheet cutting knife is designed for use on LEXAN polycarbonate sheets and other plastic materials. It features a double-bevel scoring edge for clean, consistent cuts and a rounded handle that helps fight hand fatigue for comfort and control.

How do you cut plastic trim?

Cut with carbide-tipped saw blades and bits
Cut PVC trim boards with the same hand and power tools that you use for wood. But use only carbide-tipped saw blades; plain steel ones will dull quickly. In general, the more teeth a blade has, the smoother the cut edges will be. We recommend standard combination saw blades.

Can you cut plastic with scissors?

Cutting plastic with scissors is not easy and not always recommended, depending on the type of plastic you want to cut. These power scissors can cut through plastic and nearly any other kind of material.

Can a Dremel cut plastic?


The Dremel 561 cuts hard wood up to 3/8" and soft wood up to 5/8". Also cuts plastics, fiberglass, drywall, laminate, aluminum and vinyl siding. Use with the Dremel Multipurpose Cutting Attachment (model 565).

What tool do you use to cut shapes in wood?

General purpose wood cutter blade
Jigsaws are ideal for cutting curves and complex shapes in wood (Photo 1). They also work well for making short crosscuts on a board (Photo 2) and finishing inside corner cuts (Photo 3) that you start with a circular saw. Jigsaws are not good for making fast, long, straight cuts.

How thick can a Dremel cut?

Multipurpose Cutting Bit: 561
The Dremel 561 cuts hard wood up to 3/8" and soft wood up to 5/8". Also cuts plastics, fiberglass, drywall, laminate, aluminum and vinyl siding.

Can you use a dremel to cut plywood?

Using the general cutting bit, my 8 years old dremel was able to cut through 1/8 plywood like hot knife on butter. However, the cutout is big and not very smooth. It is difficult to keep cutting in a straight line. So I made a rough cut, and then use the sanding attachment to smooth it out.

Can a Dremel be used as a jigsaw?

if you have both, use both. the dremel is good awful to do extended cuts. a jigsaw is much more suited for cutting repeatedly. the dremel is good for finishing the cut, small cuts, and getting rid of the jaggies.

Can you use a Dremel as a Rotozip?


It is possible to use Dremel bits in a Rotozip, depending on the models and sizes as well as the project at hand. It would be recommended when deciding, are dremel bits compatible with rotozip, to compare the RPM's of the tools, if the Rotozip is running faster than the Dremel, your cutoff wheel might fly apart.

Can you use a dremel to cut fiberglass?

RE: Using Dremel Tool to Cut Fiberglass
Dremel will work fine. Get the Cutting bit. It is basically a rotozip bit. Go slow and let the tool do the work.

Can you use a regular drill bit in a Dremel?

How to Use Regular Drill Bits on a Dremel. Dremel makes a variety of high-speed rotary and oscillating tools, along with other power hand tools. If you want to use a regular bit that is out of the size range that the collets on your Dremel rotary tool accept, you can use a 4486 Dremel chuck.

Can a Dremel cut concrete?

Cut through hard materials, such as marble, concrete, brick, porcelain, ceramics and epoxies, with the Dremel Diamond Wheel. It's coated with fine diamond particles for tackle these hard materials. The wheel gives you smooth, fine cuts.

How do you attach a Dremel bit?

How to Change a Dremel Bit
  1. Press and hold the silver-colored Shaft Lock Button near the front edge of the tool.
  2. Unscrew the metal collet nut on the end of the shaft by turning counterclockwise.
  3. Unscrew the plastic housing cap front at the end of the tool by turning counterclockwise.
  4. Remove the collet from the motor shaft.

Is a Dremel a router?


Turn your corded Dremel rotary tool into a mini plunge router - and cut perfect decorative edges, straight slots or rout freehand. Plunge feature lets you start your cut in the middle of your workpiece. Ideal for making inlays in furniture, musical instruments and wood crafts.

Can a Dremel cut wood?

A Dremel is a type of rotary tool that is used for a variety of purposes such as sanding, polishing, sharpening, cutting, grout removal and among others. Dremel is not entirely a tool, but a company that manufactures rotary tools. You can use it to cut through materials such as drywall or a piece of wood.

How do you cut plexiglass by hand?

How to Cut Plexiglass by Hand
  1. Place the Plexiglas on a flat work surface.
  2. Mark the Plexiglas with a grease pencil where you want to cut it.
  3. Along the lines you marked, carefully score the Plexiglas five to 10 times with a glass cutter.
  4. Move the scored section to the edge of the work surface.