What does no VGA cable mean?

Category: technology and computing computer peripherals
4.6/5 (109 Views . 11 Votes)
VGA having no signal means thatyour monitor is powered on but not connected to a video card, soyou should make sure the connection is workingproperly.



People also ask, how can I fix no VGA cable?

Option 3: Restart your devices

  1. Turn off your computer and monitor. Unplug their powercables.
  2. Wait a few minutes. Afterwards, reconnect the VGA cable to thecomputer and monitor. Plug the power cable back, too.
  3. Turn on your computer and monitor and see if the VGA connectionworks just right.

Likewise, what is a VGA cable used for? VGA stands for Video Graphics Array. A VGAcable is a device used to transfer video signals. Itdoes this by acting as a link between the computer and the monitoror between the computer and the television screen. The videographic cable comes in two types, male and femaleconnector.

Considering this, why my VGA cable is not working?

If any of the cable's pins are bent or broken,the cable may be defective and should be replaced. Next,disconnect the monitor cable from the back of the computerand then reconnect the cable. If you see more than oneVGA or DVI connector and the monitor is not working,try the other connector.

What does a VGA cable look like?

The VGA connection on your device lookslike this. It is a female 15-pin D-sub port. The 'D' shapeensures that VGA cables will only fit one way round. It isoften coloured blue or black.

39 Related Question Answers Found

Do VGA cables go bad?

Yep , sometimes a cheap one will go bad or theVGA cable for the portable projector will wear outeventually. I've seen many bad cables over the years. Somestand out, such as a VGA cable the causes the display to beout of focus or washed out.

What does it mean when it says no VGA cable?

It means that the monitor is looking for aVGA signal, but isn't getting a VGA signal. Thiscould be due to a hardware problem (with either computer ormonitor), or a bad or poorly connected cable. The computercould also just be turned off. It means thatno data is being sent from the graphics card to themonitor.

Is VGA analog or digital?

The first and probably most important is that VGAuses an analog signal and HDMI uses a digital one.Due to that, running a VGA signal directly into a HDMIconnector on a monitor could actually damage it, because theanalog signals is at a higher voltage level.

Is VGA cable better than HDMI?

HDMI vs. VGA. VGA is an olderstandard that carries only a video signal. HDMI is thedefault cable standard for newer electronic devices, such asBlu-Ray players or LED TVs. HDMI can carry bothdigital video and audio signals, all while encrypting data withHDCP.

How do I enable my VGA port?


Control Panel. Windows 7 allows switching to theVGA monitor through the Control Panel. From the computer's“Control Panel,” click “Hardware and Sound”and then “Connect to an External Display.” Select theVGA monitor from the “Display” drop-down menuand click “OK” to switch to the VGAmonitor.

What does VGA stand for?

Video Graphics Array

How do you hook up a VGA cable?

Plug the VGA cable from the monitor into theVGA port on the motherboard. Press the VGA cable pluginto the port so it fits snugly and tighten the thumbscrews oneither side. If you use the DVI adapter, plug that into the DVIport on the video card and tighten the thumb screws on eitherside.

Why does my computer say no signal when I turn it on?

Unplug the cable running from your monitor to yourPC and plug it back in, making sure the connection is firm.If the "No Input Signal" error still appears, theproblem does not rest with the cables or the monitor, but with yourPC. Open your PC case and locate your videocard.

How do I enable VGA mode?

Method 1: Booting to VGA Mode Using Windows AdvancedOptions Menu
  1. During the rebooting process, repeatedly press the F8 key toenter Windows Advance Options Menu.
  2. Use the up and down arrow keys to select Enable VGA Mode andthen press the Enter key.

How do I fix my monitor problem?


Fixing Computer Monitor Display issues – PCSolutions
  1. Attach the monitor to a different computer. If the monitorstill doesn't work, replace the monitor's cable.
  2. Unplug your computer from the monitor and power outlet.
  3. Reinstall the video card drivers.
  4. Right-click a blank area of your Desktop.
  5. Determine whether the problem is caused by electricalinterference.

Does HDMI to VGA cable work?

HDMI-to-DVI cables are also passive, butthey carry digital signals only. The analog RGB signals aremissing, but that does not matter as the DVI monitordoes not need them. HDMI contains no analog signal soit is not possible for any combination of passive adapters and/orcables to convert it to VGA.

Why HDMI cable is not working?

If your HDMI connection is still notworking, it's likely there are hardware issues with yourHDMI port, cable or your devices. This will resolveany problems you might be experiencing due to yourcable. If changing the cable doesn't work foryou, try your HDMI connection with another TV or monitor oranother computer.

What does no signal mean?

"No Signal" is a message coming not from yourcomputer, but from your display device, indicating that it hasnothing to display.

What is a DVI connector?

Digital Visual Interface (DVI) is a videodisplay interface developed by the Digital Display WorkingGroup (DDWG). The digital interface is used to connect avideo source, such as a video display controller, to a displaydevice, such as a computer monitor.

How do I fix the color on my computer screen?


  1. Close all open programs.
  2. Click Start, and then click Control Panel.
  3. In the Control Panel window, click Appearance and Themes, andthen click Display.
  4. In the Display Properties window, click the Settings tab.
  5. Click to select the color depth you want from the drop-downmenu under Colors.
  6. Click Apply and then click OK.

Is it better to use VGA or HDMI?

HDMI is really best for connecting a PC toan HDTV. Consequently, I'd go with a DVI cable. That'll give you apure digital signal (VGA is analog) and a much sharperpicture at higher resolutions. Your Dell ST2210 has a nativeresolution of 1,920 x 1,080, which you can and shoulduse.

Does VGA carry sound?

DVI and VGA are both incapable of supporting anaudio signal, even if they're converted to HDMI (which doessupport audio). To get audio, you'll need to use a separate audiocable.