What does deep stage mean in drag racing?

Deep staging is the practice of rolling forward enough to turn off the prestage light. The thought behind this is you are closer to the finish line than your opponent.

Hereof, what does staging mean in drag racing?

Shallow staging involves rolling through the starting area until both the prestage and stage lights are lit. This maximizes the amount of rollout you have, which improves elapsed time at the expense of reaction time. This is the technique recommended for new bracket racers until they learn proper launch procedures.

Secondly, how does CrossTalk work in drag racing? The new option named "CrossTalk" is being used in bracket racing, electronics (delay box) classes that use the full tree and handicapped dial ins. This feature has the potential to go nationwide in 2004. With this option, the amber lights will be focused directly at the driver in his/her lane.

Also, what is a perfect reaction time in drag racing?

Since there is a half-second (or . 500 seconds) delay until the green light comes on, a . 500 reaction time is perfect.

How do drag racing trees work?

Modern drag races are started electronically by a system known as a Christmas tree. When drivers are preparing to race, they first cross the beams 7 inches behind the starting line. Crossing this beam activates the top bulbs.

29 Related Question Answers Found

What is a pro tree in drag racing?

The first type which is mainly used by the NHRA Pro drag racing is called the Pro Tree. The Pro Tree is when all three amber lights flash simultaneously followed four-tenths of a second later by the green light ( green is when you gas the vehicle forward).

What is double Bulbing?

Probably double-bulbed. Also called quick-staging a guy. It's when you light both the Pre-Stage and Stage bulbs before the guy in the other lane lights the Pre-Stage bulb.

What is a guard beam in drag racing?

Many tracks also have what is called a “guard beam”, which starts the ET clock if the stage beam does not. Smyth goes on to state: “The guard beam is 15-inches after the Stage beam (this is the start line). The 60 foot clock is 61-feet 3-inches from the stage beam.

What does staging a car mean?

In general terms 'stage 1' means mild upgrade, 'stage 2' more aggressive, often reliant on additional modifications, and 'stage 3' would be aggressive, often compromised or race oriented parts. But beyond that, it means pretty much nothing to anyone outside of the particular sphere of the car you're talking about.

Does reaction time affect ET?

Technically speaking, reaction time doesn't affect ET. ET is the time it takes your bike to move from the starting line to the finish line. It doesn't, E.T. is Elapsed Time, the time when you leave the starting line until you hit the finish line.

What does no box mean in drag racing?

"Delay Box" is a common slang term used in drag racing to describe an on-board timer which is a Transmission Brake Delay Timer. A transbrake forces the race car to remain stationary at the starting line, in gear, regardless of how much engine power is applied.

What is 60 ft in drag racing?

60 FOOT TIMER

Measures the time it takes the car to cross the first 60 feet of the quarter-mile. This shows you how well the car launches, which affects your elapsed times. Most street-tired cars have 60 foot times around 2 seconds.

What does 1320 mean in drag racing?

A dragstrip is a facility for conducting automobile and motorcycle acceleration events such as drag racing. Although a quarter mile (1320 feet, 402 m) is the best known measure for a drag track, many tracks are eighth mile (201 m) tracks, and the premiere classes will run 1,000 foot (304.8m) races.

What is courtesy staging in drag racing?

If you're still fairly new to drag racing, you may not know what “courtesy” staging is. The act of courtesy staging is when the first racer pre-stages (Racer X). Racer X then waits till the second racer (Racer Y) pre-stages. Once Racer Y has pre-staged, Racer X then proceeds to stage.

What does ET mean in drag racing?

elapsed time

How do you use the delay box in drag racing?

You enter your dial in and your opponents dial in into the delay box and it automatically calculates the difference. It then adds this time to your delay setting when you leave off your opponents light. Therefore, you are reacting to the very first flash of amber which happens to be on your opponent's side of the tree.

What's a breakout in drag racing?

Drag Racing Lingo: Breakout: Used only in handicap racing, “breakout” refers to a vehicle running quicker than the racer has predicted. The racer who breaks out loses unless his or her opponent breaks out by more or commits a more serious foul, such as leaving too soon (see “red-light”) or crossing the centerline.

What is a good reaction time on a pro tree?

500 reaction time is perfect on the sportsman tree and . 400 is perfect on the pro tree.

How do you get a perfect launch in drag racing?

Depress the clutch once the car is ready at the starting line. Shift transmission to first gear. Maintain engine revolutions per minute (rpm) to about 50% of the maximum engine range (for example, if red line is at 6500 rpm, maintain at ~3200 rpm). Wait for the signal lights to turn green.

Do people still street race?

As far as the Fast & Furious style of street racing, it's not very common, but it does exist. However street racing is fairly common across the US. And there are different levels of street racing, from racing people at a stop light, to racing from a roll on the highway, to pulling purpose-built cars off a trailer

Why have a deep stage?

The timers start when the stage light goes out. Deep staging is the practice of rolling forward enough to turn off the prestage light. Heavy cars with a lot of rotation can benefit from this because it cuts down reaction time (the time when the light turns green to the time you knock out the staging lights).

What is a good DA for drag racing?

There is no 'best DA'. The lower the DA, the more power you will make. Of course, really good DA's are most often associated with cold weather, which might preclude good track conditions, but you get the idea.