What does a 4x8 5/8 sheetrock weigh?

Asked By: Mounir Ziemer | Last Updated: 8th May, 2020
Category: home and garden indoor environmental quality
3.9/5 (2,837 Views . 16 Votes)
74 pounds

Click to see full answer


Accordingly, how much does a sheet of 5/8 drywall weigh?

For a frame of reference, standard 1/2" drywall that is used in interior residential construction generally weighs about 1.6 pounds per square foot, totaling 51.2 pounds for one sheet. A 5/8" sheet of drywall, which is used to achieve fire ratings, typically weighs a little over 70 pounds.

Furthermore, what is the weight of gypsum board? Weight: 1.2 – 1.4 psf (5.9 – 6.8 kg/m2) Widths: 4' (1220 mm) standard 54” (1375 mm) Lengths: 8' (2440 mm) to 12' (3660 mm)

Also Know, how much does a 4x10 sheet of 5/8 drywall weight?

Standard Drywall One-half-inch board weighs 54.4, 68 or 81.6 pounds for sheets of eight, 10 or 12 feet. Boards 5/8 inch thick weigh 73.6, 92 or 110.4 pounds per eight, 10 or 12 feet. Quarter-inch board, only manufactured in lengths of eight of 10 feet, weighs 38.4 or 48 pounds, respectively.

What's the fire rating on 5/8 drywall?

Type X fire rated gypsum drywall that is 5/8 -inch (15.9mm) thick and installed on each side of nominal 2-inch x 4-inch (38x89mm) wood studs spaced 16-inch (400mm) o.c. or 3-5/8 inch (610 mm) steel studs spaced 24” o.c. has a minimum fire rating for the assembly of 1 hour, which is a typical requirement for many

37 Related Question Answers Found

How much does 12 foot 5/8 drywall weight?

While the weight of drywall at 5/8” thickness is about 2.31 pounds per square foot. However total weights in lbs may differ by size and by brand. By the sheet, standard drywall sheeting comes in at: 4' by 8' by ½ is close to 52 pounds 4' by 12' by ½ is close to 77 pounds.

Is lightweight drywall any good?

Although both standard drywall and lightweight drywall are good for any room in your house (except the bathroom) the lightweight option is more user-friendly. Since it is lighter, carrying it around and hanging it isn't incredibly difficult.

How much does a 4x8 sheet of drywall cost?

4' by 10': $11 per sheet. 4' by 14': $13 per board. 4' by 16': $15 per sheet. 4' by 9': $9 per board.

How much weight can drywall hold?

How much weight can drywall hold without anchors? This can be 5 to 10 pounds, but keep in mind that the drywall is an extremely brittle material and, it is not strong enough to hold the weight for a longer period of time.

How much is a drywall lift?


Drywall Lift 11'
$28.00 4-Hour (Minimum) $160.00 Per Week
$40.00 Per Day $480.00 4 Weeks

How many sheets of drywall can a truck hold?

The bed is about 22 inches, assuming 1/2 inch per sheet you could fit about 40 sheets, if you use thicker drywall probably about 30 or so. I'm sure that will put you over payload capacity. Payload capacity is your limiter.

How much is a sheet of Sheetrock at Home Depot?

Compare Similar Drywall Sheets
Price $11.28 $16.47
Ratings (317) (19)
Drywall Features No Additional Features Fire Resistant,Sag Resistant
Width (ft) x Length (ft) 4x8 4x12
Drywall Product Thickness (in.) 3/8 in. 1/2 in.

How many screws go into a sheet of drywall?

Drywall screws per sheet. Drywall screws should be installed every 12 inches. This means that when using 48 inch wide sheets, you will have 5 screws in each stud when the sheets are hung perpendicular to the framing; two on the edges and 3 in the field.

Can you use 3/8 drywall wall?

Depending on the joists spacing, whatever you save by installing 3/8" you will likely loose because the thinner the drywall the harder it is to install it, especially on the ceiling. 1/2" will be just fine even with 24" joists spacing but in many jurisdictions garage ceilings require 5/8" due to fire regulations.

What type of drywall is used for ceilings?


1/2-inch: Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. These panels are easy to carry and hang. Even easier are ultra-light 1/2-inch panels, which are 13 pounds lighter than conventional 1/2-inch drywall.

How much does a 10 ft sheet of drywall weight?

Using lbs/ft3 calculations for 48” wide sheets
Lbs/ft3 8 ft long 10 ft long
1/4” Standard 38.4 25.6
3/8” Standard 38.4 38.4
1/2” Standard 38.4 51.2
5/8” Standard 38.4 64

How much drywall do I need?

Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you're using 4-by-8 sheets) or by 48 (if you're using 4-by-12 sheets). If you want to get the cost, just multiply the total number of sheets by the price per sheet. Remember to add local taxes and delivery charges.

How much does 1/2 inch plywood weigh?

Softwood Plywood weight chart:
Thickness Actual Weight
1/4” 22 lbs
3/8” 28.5 lbs
1/2” 40.6 lbs
5/8” 48 lbs

What is drywall made of?

Drywall (also known as plasterboard, wallboard, sheet rock, gypsum board, buster board, custard board, or gypsum panel) is a panel made of calcium sulfate dihydrate (gypsum), with or without additives, typically extruded between thick sheets of facer and backer paper, used in the construction of interior walls and

Is gypsum board waterproof?


3, moisture-proof gypsum board and waterproof gypsum board almost the same, but the waterproof gypsum board core and face paper are waterproof, not directly exposed to the wet environment, nor direct water or soak for a long time.

Is there a difference between sheetrock and drywall?

To refer back to the Kleenex versus generic brand analogy, Sheetrock is a name brand much like Kleenex, and drywall is the same product, just without a brand name. Sheetrock is not the only term that is often confused with drywall – “stucco” is another one.

Is lightweight drywall good for ceilings?

Ultralight Drywall Strength
USG notes that their light wallboard has "superior sag resistance" and that it hangs well on ceilings with 24-inch on-center joists. They also say that the product is "stronger pound-for-pound than standard 1/2-inch drywall."