What are the dimensions of a metal stud?

For Wall Framing

The flange of metal studs measures 1 5/8 inches, slightly larger than the narrow face of a nominal piece of 2-inch dimensional lumber, which in modern times really measures 1 1/2 inches. A stud with a web size, or long face, of 3 1/2 inches is termed a 350S and takes the place of a two-by-four.

Keeping this in consideration, what is the actual size of a 2x4 metal stud?

A 2x4, for example, is really 3-1/2" x 1-1/2". Metal framing on the other hand, is referenced by actual size. As a result you will get exactly what you order. If you request a 3-5/8" steel stud, you will receive a full 3-5/8" width.

Likewise, what is a metal stud? Structural metal stud framing refers to the construction of walls and planes using cold-formed steel components. Lighter gauge metal studs are used in non-load bearing applications such as some interior walls, half-walls, and partitions. Framing techniques for metal studs are similar to those of wood construction.

Likewise, how thick is 25 gauge studs?

Thicknesses and Coatings

Steel Framing Thickness Table
Designation Thickness (mils)	Minimum Thickness (in)	Reference Only Gauge No
18	0.0179	25
27	0.0269	22
30	0.0296	20 – Drywall

What gauge are steel studs?

ClarkDietrich Cold-Formed Steel C-Studs (C-Series™) Thickness: 33 mils (20ga), 43 mils (18ga), 54 mils (16ga), 68 mils (14ga) and 97 mils (12ga). 33mil (20ga) and 43mil (18ga) framing products are produced with 33ksi steel.

24 Related Question Answers Found

Can metal studs support weight?

The axial load, or load weight limit, for metal studs varies widely. An 8-foot, 3-1/2-inch metal stud, for instance, may support over 2,000 pounds, while a 16-foot stud of the same width will support as little as 400 pounds.

What is the spacing for metal studs?

Selecting the correct size and thickness will depend primarily on the spacing of the framing members and the height of the wall. Center to center stud spacing for typical interior applications will either be 12", 16", or 24".

What is stud size?

Stud size is the size of the bolt or stud that the ring or spade terminal will be placed around. Below I have compiled a chart based off of the ISO US custom and Metric stud sizes.

What is a Csj stud?

Category. Structural Metal Stud Framing - Cold-Formed Metal Framing (05 41 00) Description. S162 (CSJ) members have a 1-5/8" flange and a 1/2" return and are considered the industry standard. S162 members are preferred for most curtain wall applications.

How much do steel studs weigh?

Structural steel studs are available in yield strengths of 33, 40, and 50 KSI (KSI = 1000 pounds per square inch). Dimensions are given for depth or web size, flange width and return lip, the weight per linear foot, and the effective area in square inches.

What is a CH stud?

Steeler Shaftwall Studs (also known as C-H Studs) can be easily combined with J Track to craft economical yet tough shaftwall systems. With a fire rating of up to 2 hours, Steeler C-H Studs are UL certified for Fire Resistance Rating, meaning peace-of-mind for designers and elevated safety for occupants.

Will galvanized steel studs rust?

Rusting of steel studs and connections is not anything new. Once you cut, scratch or pierce the protective galvanizing coating, you can/will get rust and screws are good at that.

What is the thickness in inches of a 25 gauge steel joist?

Nominal Gauge2	Minimum Thickness3 (Inches)	Mils
26	0.0163	16
25	0.0179	18
22	0.0269	27
20	0.0329	33

How many inches is 16 gauge?

15 U.S. Code § 206. Standard gauge for sheet and plate iron and steel

Number of gauge	Approximate thickness in fractions of an inch	Weight per square meter in pounds avoirdupois
13	3/32	40.36
14	5/64	33.64
15	9/128	30.27
16	1/16	26.91

How many mils is 25 gauge?

Step 2. 25 units - A 25 Gauge liner is 0.0223 inches thick. A 25 MIL liner is 0.0250 inches thick or approximately 12% thicker than a 20 Gauge liner. By comparison a dime is 0.0490 inches thick or just under twice the thickness of a 25 MIL liner.

Which is thicker 20 or 25 gauge steel studs?

A 20 gauge stud is stiffer and for a given lateral load will deflect less than a 25 gauge stud. Similarly, a 20 gauge stud can span a greater 'unbraced' distance than a 25 gauge stud to arrive at the same max deflection.

Is metal studs cheaper than wood?

Durable: Metal studs are impervious to fire, termites, rot, splitting, and any other number of hazards which can affect any kind of organic-based building material—namely, wood. Cost-effective: While never as cheap as wood, steel studs are now only about 30 percent more expensive than wood studs.

What are the different gauges of metal studs?

Standard Web Size: 2-1/2” (250S), 3-1/2” (350S), 3-5/8” (362S), 4” (400S), 5-1/2” (550S), 6” (600S), 8” (800S), 10” (1000S), 12” (1200S), 14” (1400S)
Flange Sizes: 1-3/8”, 1-5/8”, 2”, 2-1/2”, 3”.
Thickness: 33 mils (20ga), 43 mils (18ga), 54 mils (16ga), 68 mils (14ga) and 97 mils (12ga).

How many mils are in a gauge?

A “mil” is 1/1000th of an inch. This can sometimes mean a millimeter to people outside of the United States, so don't get confused! Gauge is (100) x (mils), so for example 0.3 mils = 30 gauge. To go from mils to microns, you multiply mils x 25.4.

What is an EQ stud?

To achieve a better building assembly, take a closer look at all the products you combine – right down to the steel or EQ (Equivalent) studs. A conventional 20-gauge stud has a design thickness of . 0312 inch. An EQ 20-gauge stud has a design thickness of . 0205 inch, considerably less than the standard steel.

Can you mount a TV on metal studs?

When you have metal studs, mounting a TV or hanging a heavy picture on the wall becomes slightly more challenging. Unlike wood studs where you can simply drive lag bolts or screws straight into the 2×4 studs, metal studs are hallow and have thin walls.

Are steel studs as strong as wood?

Steel studs boast a lot of advantages over their wooden counterparts, but they are weighed down with some downsides. Surprisingly, steel studs aren't as strong as wooden ones, especially the lighter versions that can only be used on interior, non-load-bearing walls.