Is a boom lift an aerial lift?

Per OSHA, a scissor lift is a mobile scaffold for which the platform only moves vertically. An aerial lift is any vehicle-mounted work platform that can move vertically and/or horizontally. The use of both scissor and aerial lifts inherently presents fall hazards to workers.

In respect to this, when should an aerial boom lift be inspected?

Annual aerial lift inspections must be performed no later than 13 months from the date of the last annual inspection. Note: often the most recent date of inspection is posted on the aerial lift.

Beside above, is a bucket truck an aerial lift? Aerial lifts are vehicle-mounted, boom-supported aerial platforms, such as cherry pickers or bucket trucks, used to access utility lines and other aboveground job sites. The major causes of fatalities are falls, electrocutions, and collapses ortip overs. Movement of the lift could crush the worker(s).

Also Know, are hard hats required on aerial lifts?

The general PPE is recommended for all response/recovery tasks/operations; only the additional PPE that may be needed for a specific hazard is noted below. General PPE includes: Hard hat for overhead impact or electrical hazards. Eye protection with side shields.

What is the difference between a scissor lift and a boom lift?

There are two distinct types of access platforms, usually called scissor lifts and boom lifts (or sometimes cherry pickers). The difference between the two being that a scissor lift can usually only move vertically, whereas a boom lift has an outreach, to work above areas not accessible from directly below.

39 Related Question Answers Found

Does OSHA require aerial lift certification?

The simple answer is no. Currently, there are no requirements set forth by OSHA or the manufacturers of aerial lifts for operators to be certified. According to OSHA Subpart L, 1926.453(a)(2), “only authorized persons shall operate an aerial lift.”

Do you have to be certified to operate a boom lift?

Boom Lift Certification. Workers must complete a certification process to operate a boom lift. In fact, it is required by the Occupational Safety and Health Administration (OSHA). Also, certification allows employers to recognize which workers are capable of operating the lift safely.

Are boom lifts safe?

In rare cases, boom lifts can tip over, much like scissor lifts, but with a greater reach, the boom lift could cause catastrophic damage. To be safe, make sure the area is completely clear.

Why are boom lifts stored up?

To keep theifs from stealing valuable tools in the bucket. Also keeps the truck from being borrowed ( hard to drive down the road in something 30 foot tall and not be noticed.

What is an aerial lift OSHA?

An aerial lift is any vehicle-mounted device used to elevate personnel, including: Extendable boom platforms, Aerial ladders, Articulating (jointed) boom platforms, Vertical towers, and.

How do you work an aerial lift?

How to Use a Boom Lift

Put on your safety harness. Lift the safety rail and climb in the basket.
Check the area between the boom lift and your work area.
Position the boom lift as close to the target area as possible.
Adjust the height and angle of each boom arm to reach your work area.
Once the work is completed, shut down the boom lift.

How do I get a scissor lift certification?

Once you or your workers complete their scissor lift training from any device with an internet connection, your workplace will be 100% compliant with OSHA scissor lift requirements. Create an account and sign up today for the aerial lift and scissor lift training program!

How long is scissor lift certification good for?

This training is typically provided by the employer and must be delivered by a competent and qualified person. *This certificate is valid for 3 years. Individuals or employers may use their best judgment to set their own expiration period.

What is the fine for not wearing a hardhat?

$1,600

How many Americans die each year in aerial lift accidents?

An average of 26 construction workers die each year from using aerial lifts. This is 2 to 3% of all construction deaths.

Can I wear my hard hat backwards?

Manufacturers do not recommend that workers wear their hard hats backward unless it is necessary for certain job applications. OSHA specifications require that workers wear hard hats the way they were designed to be worn unless the manufacturer certifies that a hard hat can be worn backward.

What is the OSHA standard for hard hats?

When Is a Hard Hat Required? OSHA requires, in 29 CFR 1910.135, that if the following hazardous conditions are present, then head protection is required: Objects might fall from above and strike employees on the head.

Which lift provides the most workspace?

Rough terrain scissor lifts have work platforms just like the indoor models. However, outdoor scissor lifts usually provide more workspace than the indoor models. Expect work platforms that are from two to four feet wide, and from five to ten feet long.

Why is it called a cherry picker?

The name 'cherry picker' is derived from their original purpose - to help people pick cherries. It is still possible to find them being used in fruit orchards, helping to get the hard to reach fruit at the tops of trees and in difficult to reach locations.

Do you need to wear a hard hat in a cherry picker?

However, before working at height decisions regarding fall protection equipment use must come from a job specific risk assessment by trained personnel. As well as fall protection equipment, the correct general protective equipment should also be worn. This may include: Hard hat with chin strap.

How old do you have to be to operate a scissor lift?

In most states you must be 18 years of age to obtain a license. Receive training from an appropriate Registered Training Organisation (RTO) Organise “on the job” training with a supervisor who holds a current EWP license and receive instructions on how to safely operate the scissor lift.

Do roofers have to wear hard hats?

OSHA's General Industry and Construction head protection standards, §1910.135 and §1926.100, respectively, do not require workers to wear hard hats when there is no risk of head injury. A universal hard hat policy is common on construction sites where workers work on roofs as well as other areas of the jobsite.