How wide should a corridor be in a house?

Category: real estate houses
4.6/5 (956 Views . 39 Votes)
Hallway widths
The minimum width of any hallway/corridor/landing within a communal area is 1200mm, which may reduce to 1050mm at 'pinch points' (e.g. due to a structural column) as long as the reduced width is not opposite, or adjacent to, a doorway.



Furthermore, how wide should a hallway be in a house?

Hallways are no exception. I would never build a hallway that's just 36 inches wide. The bare minimum width, in my opinion, is 42 inches. Four feet wide would be ideal.

Also, what is minimum door width? The minimum width of each door opening shall be sufficient for the occupant load thereof and shall provide a clear width of not less than 32 inches (813 mm). Clear openings of doorways with swinging doors shall be measured between the face of the door and the stop, with the door open 90 degrees (1.57 rad).

In respect to this, how wide is a hotel hallway?

Hallways in public buildings must provide an adequate amount of space to conveniently accommodate people in wheelchairs. The minimum required ADA hallway width is 36 inches. The standard commercial hallway width is also 36 inches, to account for ADA standards.

How wide are apartment hallways?

R311. 6 Hallways The width of a hallway shall be not less than 3 feet (914 mm).

37 Related Question Answers Found

How wide is a doorway?

Standard doorway widths vary from 18 to 36 inches and are available in 2-inch increments. For example, commonly available widths include 18, 20, 22, 24, 26, 28, 30, 32, 34 and 36 inches.

How wide is a corridor?

For narrow areas Building Regulations require a corridor width to be a minimum of 900mm.

What is considered a hallway?


A hallway in a building is a long passage with doors into rooms on both sides of it. A hallway in a house or an apartment is the area just inside the front door, into which some of the other rooms open.

What is a good size bedroom?

We determined that the average standard size bedroom in the United States is 11 feet by 12 feet (132 square feet) and is large enough to accommodate a queen size bed. The average size of a master bedroom was much larger, measuring 14 feet by 16 feet.

How long should a hall runner be?

Runners should always be matched to the shape of your hallway, but they come in a variety of lengths and widths. The standard runner rug is between 2 and 3 feet wide, and can range from 6 to 14 feet long. Ideally, you should have 4 to 5 inches of flooring visible on all sides of your carpet runner, like hedging.

How big is a standard size hotel room?

According to USAToday, the average hotel room is roughly 325 square feet with interior dimensions of approximately 13'x25' (including a full bathroom). In the United States, the average hotel will have 115 rooms and require around 48,000 square feet.

How do you measure a hallway?


Measure a hallway as you would a standard room, by recording the width and length and taking into account any alcoves or recesses. Always add 10 centimeters to your total length and width measurements.

What is considered a standard room in a hotel?

It is a type of single room, which has a king-size bed, or as two beds — this room is decorated with two queen-size beds. A standard room includes all kinds of basic facilities such as a table, chair, desk, cupboard, dressing table, DVD player, television, telephone, coffee maker and a private bathroom.

Do I need a hallway?

A hallway should never be a narrow, dark passageway between two rooms. Instead, it should make the most out of available space and improve functionality. This room, for example, combines the living and dining room, eliminating the need for a hallway in between. The large, open space makes the house feel bigger.

How do you design a hotel room?

10 Hotel Room Design Ideas To Use In Your Own Bedroom
  1. Define the sleeping space with a wrap around headboard.
  2. Include a lounge area.
  3. Place your bed in the middle of the room and put a desk behind it.
  4. Put your bed on a platform.
  5. Paint a mural on the wall behind your bed.
  6. Include a small writing desk.
  7. Add a bench at the end of the bed.
  8. Create the illusion of a floating bed.

What is a double loaded corridor?

double-load corridor. A building design in which there are apartments or other individual units on both sides of a passage corridor. Contrast with single-load corridor.

What size is a standard hotel room?


The average hotel room size in the US is about 325 square feet according to Bjorn Hanson in a Kitty Bean Yancey article three years ago in USAToday.

What is a single loaded corridor?

A single loaded corridor runs along an external (or atrium) face of the building. The associated dwellings are accessed off one side only and may be on one or more levels if the corridor access occurs on alternate levels. Single and double-aspect dwellings are possible (see Apartment Types).

What is a special purpose room?

Ideas for Special Purpose Rooms. One example of this ever-thriving trend is the special purpose room. These rooms are designed to suit a particular pleasure, hobby or activity. Whether you are a sports fan, an artist or a movie buff, these rooms make doing what you love even easier.