How wide is a 30 inch door?

Asked By: Ederne Orrtiz | Last Updated: 25th February, 2020
Category: home and garden interior decorating
4.4/5 (640 Views . 44 Votes)
In the building trades, a 30-inch door is called a “2-6” door, meaning 2 feet, 6 inches wide, or 30 inches.

Click to see full answer


Consequently, how wide is a typical interior door?

The height for all passage doors must be a minimum of 80 inches and the standard width sizes for interior doors are 24”, 28”, 30”, 32” and 36”. The minimum recommended door width to allow persons with disabilities' to pass through is 36 inches.

Subsequently, question is, what is the average size of a doorway? Although they are available in different widths, the most common size for exterior doorways is 36 inches wide, although 30- and 32-inch-wide doorways are also common.

Also to know, what are the rough in dimensions for a 30 inch door?

32-1/2 inches. The rough framing should be 2-1/2 inches wider than the door itself. That leaves room for the 3/4 inch finish frame on each side of the door, and then 1/2 inch on each side for the shims between the finish frame and the rough frame.

How big is the rough opening for a 32 inch door?

Rough Opening for 32 Inch Door For example a two-foot, eight inch (32”) by six feet, eight inch high (80”) prehung door, would require a rough opening width of 34 inches and a height of 82 inches.

33 Related Question Answers Found

How wide is a 30 inch Prehung door?

In the building trades, a 30-inch door is called a “2-6” door, meaning 2 feet, 6 inches wide, or 30 inches.

How wide is a door in meters?

HEIGHT & WIDTH
Metric (mm) Imperial (inches) Imperial (feet & inches)
2032 x 813 80″ x 32″ 6′8″ x 2′8″
2134 x 915 84″ x 36″ 7′0″ x 3′0″
2040 x 526 80 1⁄4″ x 20 11⁄16″ 6′8 1⁄4″ x 1′8 11⁄16″

Are doors a standard size?

The most common size by far, the one that was used by the majority of builders over the last few decades, is 762mm x 1981mm. This equates to a standard door width of 2ft 6in and a standard height of 6ft 6in. Other door sizes tend to be used for things like toilets, or walk-in cupboards.

How much smaller should a door be than the frame?


The frame should be 3/16" wider than the slab (1/16" clearance on the hinge jamb and 1/8" clearance on the strike jamb) and tall enough (usually 1/4" - 1/2" taller) to allow 1/8" clearance on the head jamb and allow the slab to operate without rubbing on any flooring.

What is the standard rough opening for an interior door?

The height of common doors is 6 feet 8 inches. The standard height of the rough opening for a door is the door height plus 2 5/8 inches. The additional room allows for a 3/4-inch top jamb, a shim space above the door jamb and the thickness of underlayment and finish flooring.

What size Prehung door do I need?

Pre-Hung Door Measurements
Typically a pre-hung door is measured in 30-inch and 36-inch sizes with additional sizes available in non-standard widths. The doors are also a standard 80 inches tall. Presuming the door is a 36-inch wide door, the dimensions of your opening should be 37½ inch wide by 81½ inch tall.

What is the rough opening for a 30 inch exterior door?

So, if you have a bedroom door that is 30″ wide (which is considered a 2/6 or 2′-6″ door) just add 2″ to the width and frame it 32″ wide. The height is 80″ (which is considered 6/8 or 6′-8″) add 2-1/2″ to the actual door height and frame it 82-1/2″ high.

How much bigger is rough opening than window?

3 • Measure the rough opening and the window to determine that the size is correct. Recommended rough opening is between 3/4" (19mm) - 1" (25mm) larger than the window width and height. Ensure that the rough opening is plumb, level and square, and the walls in the opening are not twisted.

How wide is a exterior door frame?


Exterior doors often are the most visible parts of a house and like interior doors, are available in standard sizes. They range in width from 2 feet to more than 3 feet, and in height from 6 feet, 8 inches to more than 8 feet. Standard thickness is 1 3/4 inches.

How much space does a door need to open?

Allow this amount of space in front of the door and against the wall where the door rests when fully opened. This is the minimum space the door requires for full function. If the door opens into a hallway, add 36 inches of maneuvering space in front of the door and at least 6 inches on the wall.

How wide should a bathroom door be?

A standard bathroom door is 32 inches (81cm). If you're working with a really small space you could bring the door width down to 28 inches or 71cm, even down to 24 inches or 61cm as an absolute minimum (note - small doors are should only be used for bathrooms, closets and utility rooms).

How much clearance do you need for interior doors?

The standard I use is 1/2" over finish floors, 3/4" is acceptable. To fix the issue the doors need to be removed, bottom of the jambs cut and reset the door. I have never seen a door set with that big of a gap unless it was to get past floors that were not level. That is a lot of room for unlevel you have there.

What is the width of a door in CM?

The standard Interior door size in America is 762 x 2032 mm.

Other Door Sizes Include:
Inches Metric Imperial
24" x 80" 610 x 2032 mm 2' 0" x 6' 8"
28" x 80" 711 x 2032 mm 2' 4" x 6' 8"
30" x 80" 762 x 2032 mm 2' 6" x 6' 8"

What is the bottom of a door jamb called?


Vertical frame members are called “side jambs”; the top, horizontal piece is the “head jamb”; the bottom, horizontal piece is the “sill”.

How close can a door be to a wall?

Framing a door close to a wall. You should leave at least your king and jack stud spacing agianst the wall. You will need that 3" in order to put trim molding up around the door. So, in all, with the corner bunker studs, from the concrete wall, the door frame will be about 6 1/2" out.

How do you make a door opening smaller?

Measure the overall width for a doorjamb that is to be installed in the smaller doorway opening and add 1/2 inch for clearance to install the jamb. If a door is not planned, determine the size of the finished opening and add 5/8 of an inch for drywall at each side of the opening.