How much oil does a 2011 Forester take?

The 2011 Subaru Forester non-turbo models oil capacity is 5.5 US quarts (5.3 liters) and the turbo models oil capacity is 4.4 US quarts (4.2 liters).

Hereof, how many quarts of oil does a Subaru Forester take?

5.1

Additionally, how much oil does a 2012 Forester take? Engine Oil Capacities: With filter 5.5 quarts After refill check oil level.

Then, how much oil does a 2011 Outback take?

The 2011 Subaru Outback 2.5 L model oil capacity is 4.2 US quarts (4.0 liters). The 2011 Subaru Outback 3.6 L model oil capacity is 6.7 US quarts (6.3 liters).

How much oil does a 2010 Forester take?

The 2010 Subaru Forester has an engine oil capacity of 4.2 qt.

36 Related Question Answers Found

Can you use 5w30 oil instead of 0w20?

It will only flow as a 0W when the temp dictates that it flow like a 0W. The difference in flow between a 0W30 and a 5W30 would only be different when the oil's temp is lower than the flow temp for it to behave like a 5W oil.

How often should you change your oil in a Subaru Forester?

Every 30,000 Miles

Replace the engine oil and filter on the Subaru Forester.

What kind of oil does a 2011 Subaru Forester take?

Synthetic Motor Oil

How much is an oil change for a Subaru Forester?

Car	Service	Estimate
2014 Subaru ForesterH4-2.0L Turbo	Service typeOil Change	Estimate$143.50
2018 Subaru ForesterH4-2.0L Turbo	Service typeOil Change	Estimate$146.58
2011 Subaru ForesterH4-2.5L Turbo	Service typeOil Change	Estimate$135.07
2016 Subaru ForesterH4-2.0L Turbo	Service typeOil Change	Estimate$143.50

What kind of oil does a Subaru Forester take?

The recommended engine oil for the 2015 Subaru Forester 2.0XT models is a 5W-30 viscosity and synthetic oil. The recommended engine oil for the 2.5i models is a 0W-20 viscosity and synthetic oil.

Does Subaru Forester require synthetic oil?

Subaru Synthetic Motor Oil. If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, or BRZ, or Ascent - it is REQUIRED to use synthetic oil.

What kind of oil does a 2006 Subaru Forester take?

Synthetic Motor Oil

How do you change the oil in a Subaru Forester?

Lift the front of the vehicle by driving the Forester onto a set of Rhino Ramps.
Place your drain pan under the oil pan.
Remove the 17mm oil drain plug.
Drain the oil completely.
Install a the drain plug and crush washer.
Remove the oil filter using your favorite type of filter wrench.

How many quarts does a Subaru Outback take?

The oil capacity specification for the FB25 2.5L non-turbo Boxer engine for an oil change with a filter replacement is 5.1 U.S. quarts (or 4.8 liters / 4.2 imperial quarts). Subaru requires SAE 0W-20 full synthetic oil for optimum engine performance and protection.

How much oil does a 2012 Outback take?

The engine oil capacity of the 2012 Subaru Outback is different based on the trim levels. The 2.5i trim levels take about 4.4 quarts of engine oil. The 3.6R trim levels take about 6.9 quarts of engine oil.

What kind of oil does a 2012 Subaru Outback take?

The recommended engine oil for thr 2012 Subaru Outback is a 5W-30 or 5W-40 viscosity.

How much oil does a 2010 Outback take?

Answer. Katherine K. responded: The 2010 Subaru Outback has an engine oil capacity of 4.2 qt for the 2.5L engines and 6.7 qt for the 3.6L engines.

How do you change the oil on a 2011 Subaru Forester?

Getting Started.
Open the Hood.
Find Oil Drain. Locate the oil drain plug underneath the vehicle.
Drain Oil. Set up the workspace, drain oil and replace plug.
Find Oil Filter. Locate the oil filter.
Remove Filter. Position drain pan and remove the oil filter.
Replace Filter.
Remove Oil Cap.

How much oil does a 2013 Subaru Outback take?

5.1

How much oil does a 2005 Subaru Outback take?

I did a first oil change on my 2005 subaru outback since it just fell out of warranty and I can avoid the dealer. I followed the recommended oil capacity in the book - 5.8 qts. I pulled the dipstick and it appears to be about a quart low. When I poured the used oil from my pan into a container, it was about 6.5 qts.

What type of oil does a 2012 Subaru Forester take?

The recommended engine oil for the 2012 Subaru Forester varies for each trim level. The X, X Limited, X Premium and X Touring trim levels take a 0W-20 viscosity and synthetic oil. The XT Premium and XT Touring trim levels take a 5W-30 viscosity and synthetic oil.

What type of oil does a 2013 Subaru Forester take?

Subaru Forester 2013, SAE 0W-20 Full Synthetic Motor Oil, by Idemitsu®. Formulated to operate with lower friction to provide better torque, horsepower and fuel economy without sacrificing long-term protection.