How much is a stamped driveway?

Asked By: Janete Gras | Last Updated: 28th March, 2020
Category: home and garden landscaping
4.8/5 (35 Views . 36 Votes)
Stamped Concrete Cost. Basic stamped concrete costs between $8 and $12 per square foot, but more involved projects can be as expensive as $18 per square foot. How much you'll pay for stamped concrete varies widely, depending on the prices for materials and labor in your local market and the complexity of the job.

Click to see full answer


Thereof, is stamped concrete more expensive?

While stamped concrete costs more than a concrete slab or asphalt, it is attractive and less expensive than stones or pavers.

Secondly, how long does a stamped concrete driveway last? 2-3 years

Hereof, how much does it cost to do a driveway?

The national range for tearing and replacing a driveway is between $6,275 to $8,500. The average is $7,394 for a poured concrete driveway as per Angie's list members. The average cost is $3,500 to $7,000 which $3 to $10 per hour, roughly. The cost may be higher for long or curved driveways.

Can you drive on stamped concrete?

Yes, you can drive on stamped concrete. We recommend waiting three to seven days of cure time after new concrete is placed before vehicles are allowed to drive on it.

37 Related Question Answers Found

Does imprinted concrete crack?

Pattern imprinted concrete problems- Cracks. Most pattern imprinted concrete companies will act as if cracks do not exist. Unless concrete is laid a metre thick there is a chance of a crack.

Does stamped concrete add value?

In most markets, a stamped concrete patio can add up 15 percent to a home's value, though this may be a high estimate. So, while a stamped concrete patio does not add much in value, it does add alot in curb appeal, making your home more attractive to potential buyers.

How much does a 20x20 stamped concrete patio cost?

The average cost for a stamped concrete is $5 to $12 per square foot, not including the concrete slab which costs $2 – $7 per square foot. Most homeowners spend a total of between $3,751 – $8,540 for stamped concrete patio. Get free estimates from concrete pros near you.

How much should I pay for stamped concrete?

Stamped Concrete Cost. Basic stamped concrete costs between $8 and $12 per square foot, but more involved projects can be as expensive as $18 per square foot. How much you'll pay for stamped concrete varies widely, depending on the prices for materials and labor in your local market and the complexity of the job.

How much does a 12x12 concrete patio cost?


Cost To Pour Concrete Patio Slab
A concrete patio is generally 4” thick and costs $5.53–$10.25 per square foot to install. For a typical 12x12 patio slab costs ranges from $796 to $1,476.

How much is a pressed concrete driveway?

Imprinted Concrete Driveways Cost Per Square Metre
Driveway Pattern Imprinted Concrete prices per square metre (excluding extras)
50 4,250 - 6,000 4,100-6,000
60 5,100-7,200 5,200-7,000
100 8,500-11,785 8,500-12,000

What is cheaper stamped concrete or pavers?

Standard concrete slabs are generally lower in cost per square foot than the alternative. Typically, you will pay 10%-15% more if you choose paving stones over standard concrete slabs. If you decide to upgrade to stamped concrete, paving stones will most likely cost you the same or even less in most cases.

Can I lay pavers on dirt?

While a permanent installation requires excavating soil and a compacted base of gravel and sand to ensure a long-lasting, level patio, you may only need the space for a season or two. A temporary installation of patio pavers on dirt may suffice until you're ready to install the hardscape in a long-range landscape plan.

Does new driveway increase home value?

Concrete can easily crack in the winter time. Asphalt is more flexible making it less likely to crack over time. Asphalt driveways can last you 20-25 years if properly installed and maintained – a great investment. While they increase the value of your home, a nice paved driveway can also help sell your home FASTER.

Can you pour your own driveway?


Good Reasons Not to Pour Your Own Concrete Driveway
The curing concrete waits for no one, and it's usually difficult or impossible to fix mistakes. If that doesn't scare you away from a large project like a driveway, then you should consider the skill required to finish concrete correctly.

How much does it cost to pave a 100 foot driveway?

The average cost of a concrete driveway, by comparison, is almost $7,400. Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50.

What is the cheapest driveway?

A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound.

How much will paving my driveway increase my home value?

Increase the value. In addition to having a house which is more sellable because of the garage, having this will only add value to your property. Adding a driveway to your property can add up to 10% to the value.

What is the cheapest way to pave a driveway?

Cheap Ways to Pave a Driveway
  1. Rustic Gravel. Gravel is one of the most inexpensive paving options for a driveway.
  2. Durable Apshalt. Asphalt is usually quite affordable.
  3. Elegant Tar and Chip. A tar and chip driveway is an affordable driveway paving option that often has a more decorative appearance than plain asphalt.
  4. Low-Maintenance Concrete.

Can you pour a driveway with bagged concrete?


Quikrete recommends its Quikrete 5000 concrete mix for driveway use, with coverage of . 6 cubic feet per 80-pound bag. For a driveway foundation 20 feet long, 10 feet wide and 4 inches in depth, the volume of the driveway is 66 cubic feet.

How do you make stamped concrete not slippery?

There are several techniques and products you can use to make a stamped surface less slippery when wet. One of the standard methods involves mixing a nonslip additive such as SureCrete's SureGrip, H&C SharkGrip or Matcrete's Rhino Grip into the water- or solvent-based acrylic sealer before rolling it on.