How much does video sewer inspection cost?

Category: home and garden home appliances
4/5 (39 Views . 35 Votes)
Plumbing Camera Inspection Cost
A sewer video inspection costs between $229 and $887, or an average of $555. Certain circumstances could make the total between $100 and $1,200. Professionals usually charge a flat rate for this service.



Beside this, do I need a sewer scope inspection?

The bottom line is that sewer lines of all ages can have potential issues. Personally I would never buy a house without scoping the sewer line. If you suspect the home has clay or concrete lines, a sewer scope is a must. Even with plastic lines, we've found plenty of issues that need to be addressed.

Also, how much does it cost to down camera a camera? A drain camera itself may cost between $50 and $3,000 depending on the quality of the product. Sturdier and larger models tend to be more resistant and durable, so they're more expensive. Similarly, those with a larger cable tend to have a higher cost.

People also ask, what does a sewer inspection consist of?

This is an inspection done by a camera attached to a snake line. The video camera records the state of the sewer, revealing any cracks, tree roots, collapsed lines, clogs and other problems inside the sewer.

Is a sewer line inspection part of a home inspection?

You might wonder, “Do I need a sewer line inspection before buying a house?” The answer is yes. A sewer inspection should be a mandatory part of your house inspection checklist. When considering what inspections to get when buying a house, do not overlook the sewer line.

29 Related Question Answers Found

How long does sewer scope take?

approximately one hour

How do I know if there are roots in my sewer line?

Signs of a root clog in a sewer or drain line
  1. Frequent, unexplained clogs in toilets, tubs, or sinks.
  2. Frequent toilet backups.
  3. Gurgling sounds.
  4. Water draining slowly from the tub or sink.

When should you get a sewer scope?


All buyers should obtain a sewer inspection if the home in question is more than 20 years old. The line might be fairly new compared to homes built before 1950, but tree roots can still clog it up over 20 years or so, and this is a fairly common problem.

How does a sewer scope work?

A sewer scope is a video inspection of the lateral sewer line leading from the house at/near the foundation and connecting to the city or HOA tap or septic tank. Sewer-scoping the line can reveal blockages, damage to the pipe system, and other problems, which are vital for homeowners and home buyers to be aware of.

How do I get the roots out of my sewer line?

The first method is to pour sodium chloride or copper sulfate, or rock salt, into your toilet. Pour a half pound of the salt into your toilet and flush as many times as you need to clean out the bowl, and repeat this process until you've flushed 2 pounds of salt into your pipes.

How do you tell if my sewer line is collapsed?

Top 5 Signs You Have a Collapsed Sewer Line
  1. Signs of a Collapsed Sewer Line Include Frequent Backups. When the toilet backs up, your bathroom gets soaked in wastewater.
  2. More Than One Fixture Clogs.
  3. Your Plumbing Gets a Mind of Its Own.
  4. Your Lawn is Constantly Soaked.
  5. Your Grass Grows Like Crazy.
  6. Catch a Collapsed Sewer Pipe as Soon as Possible.

What does a sewer line cleanout look like?

The sewer clean out is a pipe with a cap that provides access to the sewer line so that blockages can be removed. The lateral sewer line is the sewer line that connects your home to the public sewer system.

Why does my toilet smell like sewer?


Toilet Smells Like: Sewage
While many things can cause this unpleasant odor, one of the most common is an issue with the p-trap. The p-trap is a U-shaped pipe that holds a small amount of water in it to form a preventative seal against sewer gases coming up from your toilet and into your home.

How do roots get into pipes?

Tree roots are drawn to the warm water inside sewer pipes that cause vapor to escape into the soil. This warmth and moisture is detected by the roots and as a result the roots grow toward it. The vapor that is escaping into the soil is usually doing so through a small crack or loose joint.

How do you find a broken pipe?

How to Find a Broken Pipe
  1. First, shut off all appliances and fixtures in your home that use water.
  2. Now check your water meter box.
  3. Now that you've confirmed the leak, look for water damage on the walls of your home.
  4. In the area directly underneath the water damage on the wall, look at your crawlspace or basement.

How do I become a sewer inspector?

Become a Certified Sewer Scope Inspector
  1. Join InterNACHI as a member.
  2. Complete InterNACHI's home inspector certification requirements.
  3. Complete the Certified Sewer Scope Inspector Class provided by InterNACHI CPI® Jim Krumm. There is an additional cost to take this class. It is not a free, online course provided by InterNACHI.

How much does it cost to replace sewer lines?

Sewer pipe replacement cost – On average, a sewer line replacement costs $3,000 to $25,000. Sewer pipe repair cost – Homeowners report paying $1,000 to $3,000 for sewer pipe repairs (not including cleanings).

Can you see sewer gas?


If sewer gas is present in your home, the first sign you may notice is the smell of rotten eggs. You may also experience various symptoms of exposure, such as: fatigue. headaches.

What is the best drain camera?

Sewer Camera Reviews
  • TOP PREMIUM PICK: RIDGID 40798 SeeSnake L100 MicroReel Video Inspection Camera System.
  • HBUDS H-20MCAM Sewer Camera.
  • BEST BUDGET: Teslong Inspection Camera, 1080p Dual Lens 4.5” Screen Endoscope with Toughened Glass.
  • Sewer Camera Waterproof IP68 with DVR 30M/100FT Cable/Endoscope Inspection Camera.

Can you rent a sewer camera?

To identify a plumbing problem, rent a drain camera. With the drain camera you can inspect your pipes since the drain camera has a long cable that ranges between 150' and 200' deep. The drain camera is practical for pipes that are 2'' to 12'' in diameter.