How much does it cost to install metal fascia?

Asked By: Hiurma Thistlethwaite | Last Updated: 18th February, 2020
Category: hobbies and interests woodworking
4.4/5 (287 Views . 14 Votes)
Typical costs for vinyl or wood fascia boards and soffits range from $6 to $10 per linear foot, and the cost to fit out a simple single-level home is anything from $600 to $2,000. The price of aluminum fascia ranges from $8 to $20 or more, and the budget for a single-story home ranges from $800 to $6,000.

Click to see full answer

Moreover, how much does it cost to install soffit and fascia?

The labor cost to install fascia runs from $6 to $20 per linear foot but can vary greatly between companies and locations. A typical one-story home with 300 linear feet of soffits will require about 11 to 13 hours of labor running between $800 to $1,400 with an additional $120 to $150 in supply and equipment costs.

Additionally, how do you calculate fascia? Multiply the 1-1/2 inch width of the fascia board by the slope of the roof (e.g. 4/12). 1.5” times 4 divided by 12 = 0.5 or ½ inch. For a 2×6 fascia board at a 4/12 slope, the trim size would be 1-1/2 inch x 5 inches for an overhang without a soffit.

Considering this, how much does it cost to install aluminum trim?

Aluminum trim in 8"x12' sheets with a 50 year warranty that comes in up to 15 different colors: $2-$10 per linear foot. This can increase to $20 per linear foot or more if the soffits 4 are wider than 12”-16”. 200 linear feet costs between $350 and $2,000 to repair portions of a 1,200 sq.

How do you nail metal fascia?

Begin installing aluminum fascia at the center of each length by pushing it up snug to the bottom of the soffit panels. Nail it, then work your way in both directions, driving nails every 16 in., placed about 1 in. from the top and bottom. Overlap joints 1 to 2 in.

39 Related Question Answers Found

What is best material for soffit?

Vinyl is another popular soffit material that is highly durable and easy to maintain. Vinyl soffits are also available in textures and finishes that replicate the beauty of wood but without the maintenance. Vinyl soffits are also water resistant and great for high-moisture areas.

What is the difference between soffit and fascia?

Typically a soffit is used in the area beneath the eaves on the exterior of a house to close the space beneath the eave. The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside.

Do you need a drip edge with gutters?

If the home has no gutter, the drip edge will prevent the water from running down the fascia and onto or into the soffit cavity. Shingles, along with underlayments and ice and water protector, keep wind-driven rain from harming the roof's deck. However, on the edges, the drip edge must compete with the wind.

Does soffit go on before siding?

Soffit is used to enclose the underside of an eave. It also is necessary to complete the soffit before the final course of siding is installed on the wall. Vinyl soffit is designed to be easily installed lengthwise from wall to fascia. Soffit panels are similar to vertical siding.

What causes soffit damage?

Common problems that cause soffit and eave damage are:
  • Structural flaws,such as improperly installed flashing or missing shingles.
  • An improperly installed, damaged, or clogged gutter.
  • Water being forced inward due to an ice dam.
  • Animals, such as squirrels or birds, forcing their way into the eave space and nesting.

How much does it cost to wrap windows in aluminum?

The cost of aluminum window wrap is $1 to $2 per linear foot. Aluminum wraps protect aging wood from moisture and harsh outdoor weather.

How much does it cost to install flashing?

Replace flashing around chimney: $500 – $750. Roofing repair labor: $40 – $70 per square. Least expensive asphalt shingles: $60 – $80 per square. 3-tab asphalt shingles with roofer labor: $200 per square.

How much does it cost to wrap your house?

Typical costs: Depending on size, shape and location of the house, it can cost $250-$550 or more for labor and materials to install house wrap as part of the construction of a typical home.

What is the labor cost to install vinyl siding?

The cost of the vinyl siding itself ranges from $3 to $8 per square foot. Depending on the contractor you hire, this price may or may not include the labor costs for removing existing siding and installing the new vinyl siding.

How much soffit do I need?

Multiply the total length by the width to obtain the area of soffit needed to fill the gap. For example, if the total eaves length is 110 feet, and the width is 2 feet, multiply 110 by 2. The result, 220 in this example, is the number of square feet of soffit required.

How much does it cost to cap a window?

The Cost For Capping
Capping an exterior window will vary based on the materials used and the size and condition of the wood molding. The general price range is $50 to $125 with $75 per window being the average cost.

What size fascia do I need?

You construct fascia boards out of 1-inch lumber. The width depends on the width of the rafters, but since builders generally use two-by-six or two-by-eight lumber for roof construction, the most common dimensions for fascia boards are one-by-six and one-by-eight inches.

How thick should fascia boards be?

Replacement fascias do vary in thickness by manufacturer, but the rule of thumb is that to qualify structurally as a replacement board they should be somewhere between 16mm and 25mm thick - our most common range is the 18mm Replacement Fascia.

How long is a piece of fascia?

Part # Length Girth
LG-146S 10'-6" 7 1/4"

How do you calculate soffit and fascia?

To calculate quantity, multiply width by length (in feet) of each soffit surface, add them all up to get total square footage and divide by 16 (the square footage of one 16-in. panel).

What is F channel used for?

F-channel is used to hold the soffit onto your house. Soffit is the vinyl siding that makes a ceiling under an overhang. The F-channel is a thin vinyl strip that is sold where siding is sold. The upside down F creates a shelf for the soffit to slide into and rest on.

How wide are soffits?

Soffits usually range from 16 to 24 inches wide.