# How much does it cost to install and finish sheetrock?

Asked By: Angella Sanfleber | Last Updated: 14th February, 2020
Category: home and garden indoor environmental quality
4.3/5 (30 Views . 41 Votes)
The cost to install drywall is about \$1.50 per square foot.
After material and labor are added in, the cost per panel can range from around \$40.00 to \$60.00. A typical 12x12 room, for example, will use 12 panels. This would put the cost at \$480.00-\$720.00.

Similarly, it is asked, how much does it cost to finish drywall per square foot?

However, for a good job, the rate where I am is \$1.75 per square foot to \$2.00 per square foot. This is for footage applied on the walls. This would include the placing of the board, taping, mudding, spray undercoat on the ceiling and finishing off with a texture finish.

One may also ask, how much does it cost to drywall a 2000 sq ft house? Across US homeowners report spending \$1.5-2.2 per square foot to install drywall. This includes all materials and labor to both hang and finish the drywall, so that a contractor can paint it. If you have about 2,000 sq.

Beside above, how much does it cost to drywall a 1000 square foot house?

Drywall installation costs \$700-\$3,400 for 1,000 square feet of drywall. How much does it cost to frame and drywall a room?

How much does it cost to drywall a basement?

Drywall. Estimate the overall cost to install drywall in the basement at approximately \$1.50 per square foot. The basic drywall panel measures 8-feet tall and 4-feet wide and is available in thicknesses that range from 1/4" to 5/8". This standard panel usually costs between \$10 and \$20.

### How do you estimate drywall?

Estimate Drywall Sheets
Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you're using 4-by-8 sheets) or by 48 (if you're using 4-by-12 sheets). If you want to get the cost, just multiply the total number of sheets by the price per sheet.

### How much does it cost to have someone mud and tape drywall?

The average cost to install drywall is between \$1.60 and \$2.35 per square foot. For a typical 12' x 12' room with a wall height of 8', the price averages around \$815 for just the walls, or a total of \$903 if including the ceiling drywall.

### What is Level 4 drywall finish?

Level 4. For flat paint, a light final paint texture, or with lightweight wall covering. In Level 3, you have an additional coat of compound over the embedded tape at the drywall joints and angles. Here in Level 4, you have two additional coats. The fastener heads, accessories, and beads are covered with three coats.

### How much does it cost to drywall a 1000 sq ft basement?

The average cost to frame a basement is \$1 per square foot for the materials and \$2.70 to \$3.39 per square foot installed with drywall and ready for painting.

Cost to Frame a Basement.
Square Feet Materials Cost Framed and Drywall Installed
1,000 \$1,000 \$3,050
1,200 \$1,200 \$3,660
1,500 \$1,500 \$4,575
1,800 \$1,800 \$5,490

### How much does a 4x8 sheet of drywall cost?

4' by 10': \$11 per sheet. 4' by 14': \$13 per board. 4' by 16': \$15 per sheet. 4' by 9': \$9 per board.

### How much drywall can man hang in 8 hours?

Each man should be able to hang 35 to 40 sheets an eight hour day.

### Is it a good idea to drywall over paneling?

Drywall can be installed over wood paneling that is in good condition. Paneling was once a popular wallcovering in many homes. Today, as these older homes are remodeled, the paneling is removed or covered. Removing paneling can be a time-consuming and costly so many homeowners opt to drywall over the paneling.

### How much does it cost to drywall and texture?

Texture drywall Costs. For your project in zip code 98104 with these options, the cost to texture drywall starts at \$1.28-\$1.57 per square foot. Your actual price will depend on job size, conditions, finish options you choose.

### Should drywall touch the floor?

Drywall should definitely not touch concrete as moisture will wick (ie flow up the surface as in a candle/lamp wick) into the drywall and encourage mold growth. 3/8" should be sufficient - your prop up plan is not only appropriate, but a common technique used by drywallers.

### How many sheets of drywall do I need for 1000 square feet?

After you find the square footage of drywall needed, simply divide by the square footage of the sheet size you will be using to find the number of sheets needed. For example, if your wall surface is 1000 square feet and you're using 4′ x 8′ sheets, then the number of sheets needed is 1000 / 32, or 31.25.

### What is a Level 5 drywall finish?

A level 5 finish is a skim coat of joint compound (also known as mud) applied to a finish that you would normally leave at level 4. The two instances when you need a level 5 coating: the finish will be glossy and/or light will be coming from an angle low enough to highlight bumps and depressions.

### What is code for drywall on ceilings?

When applying a water-based texture material, the minimum gypsum board thickness shall be increased from 3/8 inch to 1/2 inch for 16-inch on center framing, and from 1/2 inch to 5/8 inch for 24-inch on center framing or 1/2-inch sag-resistant gypsum ceiling board shall be used. e.

### How much is a sheet of Sheetrock at Home Depot?

Compare Similar Drywall Sheets
 Price \$11.28 \$16.47 Ratings (317) (19) Drywall Features No Additional Features Fire Resistant,Sag Resistant Width (ft) x Length (ft) 4x8 4x12 Drywall Product Thickness (in.) 3/8 in. 1/2 in.

### How much does it cost per square foot to insulate a house?

Cost: The average cost per square foot is between \$0.64 - \$1.19. So, for a 500 square foot area, your estimate will vary between \$145 to \$200, if you do it yourself. For a professional job, add between \$150 to \$300 for labor, and you're looking at around \$300 to \$500 for 6 hours of work.

### When should you replace drywall?

How to Tell if your Drywall Needs to be Replaced
1. Holes. Small holes and medium sized holes can be patched up, although the patchwork will almost always remain slightly visible.
2. Water damage. Not all water damage will require replacing drywall panels.
3. Cracks. Cracks are a good indication of a misplaced seam.
4. Splinters.
5. Bumps and bulges.

### How much does framing and drywall cost?

Rough numbers are \$10 to \$20 per linear foot to build the wall and \$3.00 per square foot to supply, install, tape, mud ready for prime and paint.

### Does Home Depot sell drywall?

Drywall Sheets - Drywall - The Home Depot.