How much does it cost to install a driveway gate?

Asked By: Lyna Nigam | Last Updated: 16th June, 2020
Category: home and garden landscaping
4.9/5 (28 Views . 25 Votes)
Installing an electric driveway gate costs most between $3,000 and $12,000. Manual driveway gate installs run from $1,500 to $4,000, which covers both labor and materials. Automatic driveway gates cost about $7,000 compared to about $2,500 for manual models.

Click to see full answer


Thereof, how much does a sliding gate cost?

Price Estimates for Different Types of Driveway Gates

Types of Driveway Gates Average Reported Cost
Automatic sliding gate $950 – $1,700
Electric gates $1,950 – $2,300
Colorbond sliding gate $65 – $100 (per square metre)
Aluminium gate $2,900 – $4,500

Beside above, how wide is a driveway? The standard driveway width for residential homes ranges from 9 feet to 24 feet. The width of your driveway will vary based on whether you want a single car drive or double car drive. Additionally, the width may change to accommodate parking or a turn-around, these added features will change the cost of your driveway.

Beside above, do driveway gates add value?

Along with providing you and your family additional security, a driveway gate will increase the property value of your home. Automatic driveway gates can add five percent to your homes value.

How wide is a driveway gate?

Standard sizes

Your Driveway Width Suggested Gate Size
< 9' 6” 10' gate
9' 7” - 11' 9” 12' gate
11' 10” - 13' 9” 14' gate
13' 10” - 15' 9” 16' gate

16 Related Question Answers Found

How do you secure a driveway gate?

Build Gate Frame
Leave about a half inch on each side to allow the gate to swing without binding and for the latch to be secured. Do not allow the gate to sit on the ground either. Leave at least 6 inches of space between the gate and the driveway. Screw together with galvanized screws.

How much is an automatic gate opener?

Installing an automatic gate opening system on an existing gate costs between $1,500 and $3,000.

How do you install wrought iron fence on concrete?

Wrought Iron Fence Installation Manual
  1. BEFORE INSTALLATION, REMEMBER TO…
  2. Determine corner and end post locations.
  3. Run a tight string line between stakes to mark the fence line.
  4. Dig holes at least 6″ in diameter and 2′ deep depending on size of posts.
  5. Shovel your mixed concrete around post; fill to 4″ below ground level.

Do you need planning permission for driveway gates?

Planning Permission. You will need to apply for planning permission if you wish to erect or add to a fence, wall or gate: if it would be over one metre high and next to a highway used by vehicles (or the footpath of such a highway); or over two metres high elsewhere; or.

What is the best gate opener residential?


The following are the top 5 brands when it comes to auto gate openers:
  1. Mighty Mule. Mighty Mule is one of the leading gate opener companies.
  2. US Automatic Sentry. Another leading brand for door openers is US Automatic Sentry.
  3. Ghost Controls.
  4. ALEKO.
  5. E8 Gate Openers.

What is the standard size of a gate?

Size of Opening
Our in-stock gates come in 4 sizes: 12, 14, 16, and 18 feet. The sizes are "in the clear" dimensions between gate posts and are not the actual gate panel size.

How much does a remote control gate cost?

A typical driveway gate costs between $1,400 and $3,200. The addition of a remote control operator can cost between $550-$4,500, bringing the overall cost to roughly $1,950-$7,700. These prices all depend on the size of the gate and the style you're looking for.