How much does it cost to fill a well with water?

Asked By: Denisa Macau | Last Updated: 17th June, 2020
Category: home and garden home appliances
4.2/5 (567 Views . 25 Votes)
Well Drilling and Digging Cost Per Foot
Type Average Cost Per Foot
8” Residential Water Well $60 – $100
Irrigation or Agricultural Well $50 – $100
Artesian Well $35 – $85
Geothermal Well $15 – $40

Click to see full answer


Correspondingly, how much does it cost to put in a well?

Drilling a well costs $5,500 for an average depth of 150 feet. Most projects range between $1,500 and $12,000. Expect to pay between $15 and $30 per foot of depth, or up to $50 for difficult terrain. Digging might be enough for shallow depths, ranging between $10 and $25 per square foot.

Additionally, how much does it cost to fill a 2500 gallon water tank? "Most of them are wells that have gone dry, we do fill swimming pools." The average price from various companies appears to be between $150 and $300 for each delivery of 2500 gallons, the cost depends on distance.

Also know, how many years does a water well last?

Water wells use pumps that are used to drive water from the ground to your home. These pumps determine the lifespan of your well. Submersible pumps that are commonly used in many wells usually last from eight years to ten years. With proper maintenance and care, the lifespan can be increased to fifteen years.

Do you pay for well water?

While there are no monthly water bills, homeowners need to be prepared to replace the well pump, the pressure tank and filters (if any) over time. These expenses could easily exceed several years of water bills.

38 Related Question Answers Found

Is it healthy to drink well water?

Most well water is safe to drink, but there can be health risks associated with well water used for drinking. Well water may contain microorganisms and chemicals that could make you sick. That means it's up to the well owner to ensure that well water is safe to drink.

Can I drill my own well?

You can drill your own shallow water well using PVC and household water hoses. It is a cheap and effective way to dig your own shallow water well. It is very likely that you can drill your own well. Many successful wells have been drilled using this well drilling method.

Is a well pump covered by homeowners insurance?

Well pumps are typically protected by your homeowners insurance policy but will depend on what caused them to stop working. If the issue that causes your well pump to break down is a named peril, you will be protected. If wear and tear or neglect are at fault, your homeowners insurance will not help pay for repairs.

How long is a well good for?

The average lifespan of a well is 30-50 years, although they can last longer or shorter depending on different circumstances.

Is well water safer than city water?


As a natural source from the Earth, well water automatically tastes better than city water. Well water is also healthier because it's full of minerals and isn't treated with harsh chemicals. Because of this, city water has a longer, more intense cleaning process that causes more problems than benefits to our health.

How deep do you have to drill for water?

Drilling a Water Well for household use will usually range from about 100 feet to 500 feet deep, but When drilling a new well for your home or business, the depth of the well depends on the geology and underground water levels of the area.

What are the 3 types of wells?

There are three types of private drinking water wells.
  • Dug/Bored wells are holes in the ground dug by shovel or backhoe.
  • Driven wells are constructed by driving pipe into the ground.
  • Drilled wells are constructed by percussion or rotary-drilling machines.

Does well water ever run out?

Whenever it is warm out, there is a chance of your private well running dry. Most wells flow without problem through warmer months, but in areas of drought and a low level of groundwater there is a chance for them to run dry. Read on to learn about the signs of a dry well and what can be done to fix one.

Can a well go dry?

A well is said to have gone dry when water levels drop below a pump intake. This does not mean that a dry well will never have water in it again, as the water level may come back through time as aquifer recharge from precipitation seepage increases and/or pumping of the aquifer is lessened.

What happens if you run your well dry?


When a wellruns dryit doesn't mean that the well will never produce water again. Aquifers can recharge through a combination of more precipitation and less pumps pulling water out of that aquifer. Sometimes wells can run dry permanently, but that is quite uncommon.

Does a well pump use a lot of electricity?

Well pumps use a huge amount of energy every time they start up. It is not uncommon for people to have 3/4 hp pumps installed in their wells equaling 30 minutes of pumping per day or 350 kWh/yr, while a ½ hp pump, which uses only 240 kWh/yr, would be sufficient.

How do you maintain a well?

Keep hazardous chemicals, such as paint, fertilizer, pesticides and motor oil away from your well. Periodically check the well cover or well cap on top of the casing (well) to ensure it is in good repair. Always maintain proper separation between your well and buildings, waste systems, or chemical storage facilities.

What would cause a well to stop working?

Your well pump may have stopped working due to lack of power. Sometimes resetting a breaker or replacing a fuse affected by a power surge or brownout can fix this. Then switch the circuit breaker off and on. This should not be repeated, as it could cause a fire hazard due to overheating wires.

How do you know if your well is going dry?

Is Your Water Well Going Dry? 5 Common Warning Signs
  1. No. 1: Your Faucets Are Sputtering.
  2. No. 2: Your Water Well Is Slow to Recover After Heavy Use.
  3. No. 3: Your Well Pump Is Running for a Long Time.
  4. No. 4: Your Water Pressure Has Declined.
  5. No. 5: Your Well Water Looks or Tastes Muddy.
  6. Is Your Water Well Really Going Dry?

How can I tell how deep my well is?


Take up the slack and mark the string at ground level.
Pull the weight out of the well. 3. Measure from the bottom of the weight to the ground level mark on your string. This is the depth of your well.

How much does it cost to fill a 1000 gallon water tank?

Gallon Propane Tank Costs
Gallons Price
120 $400-$800
250 $500-$1,000
500 $500-$3,000
1,000 $1,500-$3,500

How much water is 1000 gallons?

The average price of water in the United States is about $1.50 for 1,000 gallons.