How much does aluminum handrail cost?

Asked By: Remigi Justh | Last Updated: 20th April, 2020
Category: home and garden indoor environmental quality
4.2/5 (349 Views . 37 Votes)
Aluminum railings average about $80 per linear foot installed. Materials make up $50 per linear foot of this total.

Click to see full answer

Thereof, how much does it cost to install a railing?

Cost data is based on research by HomeAdvisor. On average, the cost to install wrought iron railings is $2,600. Most people pay between $700 and $4,600 for materials and labor. Plan with $50 to $120 per linear foot for materials, in addition to $300 to $1,000 per project for labor for a banister between 10 and 30 feet.

Also, are aluminum railings sturdy? Aluminum Railings Are Durable. Aluminum, unlike many other railing materials, isn't susceptible to corrosion or rust, and it can easily hold up to tough weather, including ice, snow, rain, and UV rays. Aluminum railings also won't splinter, twist, shrink, or warp.

Correspondingly, how expensive is cable railing?

Most homeowners pay between $2,000 and $3,250 or more. This is based on 50 linear feet of railing for a 350 square foot deck. The average price for a cable railing is $60 per linear foot. Installation runs about $25 per linear foot while materials make up most of the project cost at $35 per linear foot.

What is the best material for deck railing?

Vinyl and aluminum are both excellent choices for your new railing. However, you might also consider the other options available on today's market, including wood or wrought iron. Many homeowners choose wood railings for a rustic look; however, it's worth noting that vinyl can mimic the look of wood.

37 Related Question Answers Found

Are wrought iron railings expensive?

CON: Wrought iron is expensive.
Therefore, wrought iron railings tend to be much more expensive than wood or vinyl fencing options. And, if your wrought iron railings are custom made, it will only add to the cost.

How do you attach a porch railing to a house?

How to Attach a Deck Railing to a House
  1. Measure the distance between the nearest deck post and the wall of the house.
  2. Cut two horizontal railings from the same material you are using for the rest of the deck's rails, using a circular saw.
  3. Fit the lower rail into position against the post.
  4. Hold a deck railing mount bracket on the spot you marked on the wall.

How much does it cost to redo a stair railing?

A complete makeover for a standard staircase falls on the mid or high end of that price range. New treads and risers usually cost about $1,800 to $2,500. New balusters usually cost about $1,200 to $1,600. A complete makeover including treads, risers, balusters, a handrail and newel posts usually costs $4,000 to $8,000.

How much does it cost to build a deck with a roof on it?

Average Cost to Build a Deck with a Roof on It
Adding a roof runs $3,000-$10,000. Building a sunroom costs $20,000-$60,000. Deck enclosures cost $8,000-$25,000.

How do you install handrails and spindles?

Measure each tread and cut it to size then install it using 2-1/4" trim screws.
  1. installing the treads. Install the Treads.
  2. fill in screw holes with wood putty. Fill Screw Holes.
  3. mark stair railing for angled cut. Cut Railing to Length.
  4. pre drill landing and treads for balusters.
  5. attach rail fasteners into newel posts.

How much does glass railing cost?

Glass Railing Costs
Costs range from $150 to $850 per linear foot. Materials alone run $100 to $600 per foot. Though labor is priced per project, estimate $50 to $250 per foot or around $75 to $200 per hour.

Are glass railings expensive?

The average price of a glass railing system ranges anywhere from $140-270 per linear foot —the price varies depending on the type of glass system you choose. Although glass railing can be pricey up front, it often may be less expensive than other railing types in the long run.

What is code for cable railing?

In most states, the residential code is 36” high. There are some exceptions though like in California the required height for residential railing is 42” . On the other hand, the commercial International Building Code requires the railing to be at a minimum of 42” height.

What is the code for porch railing?

Porch Railing Installation
Basically, railing height must be at least a minimum of 36 inches from the floor of your porch floor. If your porch or deck is above a certain distance from the ground (over 9 feet for example) you may be required to install 42 inch balusters or longer.

Are cable railings safe?

Vertical stainless steel cable is a safe, easy-to-clean railing style that's perfect for homes with children. Fortunately, modern building codes are mandating railings be built with child safety in mind. There are also railing options that eliminate the risk of entrapment between railing balusters.

Is cable railing more expensive?

Cable patio rails are going to be more affordable than other modern deck railings such as glass railings, provided those cables aren't attached to stainless steel or comparably expensive posts. However, while the installation process is also quite easy and straightforward, it's a bit time consuming.

How far apart should handrail posts be?

The structural integrity of the railing depends heavily on the posts that support the rail structure. These posts should be no farther apart than six feet on the flat deck and no farther apart than 5 1/2 feet on stairs. Your local building department might require closer post spacing for added rail strength.

How far can cable railing span?

Our standard cable spacing is 3″ on-center running the length of each post. Cable railing requires support (mid posts) every 4 feet to maintain cable spans with minimum deflection. If you wish to maintain 3″ spacing for cable sections that span over 4 feet (max.

Does aluminum railing get hot?

As for aluminum's unique thermal properties, they mean that even if an aluminum railing is out in the sun all day, it probably won't get hot enough to be uncomfortable to the touch.

How do you install an outdoor handrail?

How to Install an Exterior Step Handrail On Your Front Porch
  1. Test Fit the Grab Rail. [00:39]
  2. Switch to Bigger Drill Bit. [01:11]
  3. Insert Anchors. [01:38]
  4. Attach Anchors. [01:47]
  5. Adjust Top Bracket. [02:16]
  6. Mark Holes for Drilling into Grab Rail. [03:36]

How do you cut aluminum railings?

How to Cut Aluminum Railings
  1. Place the aluminum rail you want to cut on a hard, flat surface.
  2. Place something heavy or sturdy on either end of the aluminum rail (e.g., a sandbag or bag of dirt) so that the rail does not roll while you are cutting it.
  3. Put on your safety goggles.
  4. Take your miter saw and place it on the spot you would like to cut.

How do you install handrails on concrete steps?

Attaching the Railing to a Concrete Base. To attach your railing to concrete you will need a hammer drill to drill into the concrete, a standard drill for drilling into the pipe, an Allen wrench to tighten the fittings, a hammer, a tape measure, hack saw, vacuum, extension cord, and a sharpie marker.