How many square feet is 10 yards concrete?

One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet. 5-inches thick – covers 65 square feet. 6-inches thick – covers 54 square feet.

In respect to this, how do you convert square feet into concrete yards?

Calculate

Calculate your area (see below)
Calculate your volume: Multiply area times the depth, this will be volume in cubic feet.
Calculate your cubic yards: Divide cubic feet by 27 to convert to cubic yards and this is your answer.
Where (ft²) = square foot, (ft³) = cubic foot, (yd³) = cubic yard.

Likewise, how much is a square foot of concrete? A typical concrete slab costs $4 to $8 per square foot with most homeowners spending between $5.35 to $6.17 per square foot, or $113 to $126 per cubic yard for both materials and installation. Your final cost will depend on the slabs size, thickness, and if you any special reinforcement such as wire mesh or rebar.

In this regard, how much concrete do I need for a 10x10 slab?

Using a Concrete Calculator You'll also get the number of 40-pound, 60-pound, or 80-pound bags of concrete are needed for the project. For example, a 10′ x 10′ slab that is 4″ thick will need an estimated 1.23 yards³ or 75 60lb bags of concrete and will cost roughly $140.

How many square feet are in a cubic yard?

One Cubic Yard = 27 Cubic Feet Length x Width = Square Feet

	1 YD	10 YD
Depth
2 Inches	162 sq.ft.	1620 sq.ft.
3 Inches	108 sq.ft.	1080 sq.ft.
4 Inches	81 sq.ft.	810 sq.ft.

29 Related Question Answers Found

How many feet is 90 square feet?

90 sq ft to sq m conversion. A square foot is a unit of area. It is the size of a square that is one foot on a side. It is 144 square inches, 1/9^th of a square yard, or approximately 0.093 square meters.

Convert 90 Square Feet to Square Meters.

sq ft	sq m
90.04	8.3650
90.05	8.3659
90.06	8.3668
90.07	8.3678

How do you get a square foot?

If you are measuring a square or rectangle area, multiply length times width; Length x Width = Area. For other area shapes, see formulas below to calculate Area (ft²) = Square Footage.

How do you find a square foot?

To find square feet you have to multiply the length in feet of a figure by the width in feet. This yields a product called the area, which is expressed in square feet (or square inches if you are calculating a much smaller space, such as a dollhouse, for example).

How many feet equal a square foot?

To to find how many feet in a square foot we must divide one foot squared by one foot. Let's do the math. = (1) × (foot) = 1 × foot, we write as 1-foot. So there is 1-foot of feet in a square foot.

How many yards are in a square yard?

A square yard is a a unit of area and a cubic yard is a unit of volume. 3 = 12 square yards.

How many cubic yards are in a ton?

A cubic yard is equal to 27 cubic feet. You can use the online calculator to determine how many cubic yards of material are required. As a general guide, 1 cubic yard of aggregate, sand, or dirt is equivalent to 1.5 tons.

How do you calculate yards?

How to calculate cubic yards? The formula: Number of Cubic Yards = Length (in feet) Width (in feet) Depth (in feet) ÷ 27. Simply multiply the three dimensions together to find the number of cubic feet, then divide by 27 to find the number of cubic yards.

How do I calculate how much concrete I need?

How to calculate concrete:

Determine how thick you want the concrete.
Measure the length and width that you'd like to cover.
Multiply the length by the width to determine square footage.
Convert the thickness from inches to feet.
Multiply the thickness in feet by the square footage to determine cubic feet.

How many square feet does a 80lb bag of concrete cover?

30 cubic feet, 60 pounds of concrete mix yields . 45 cubic feet and an 80-pound bag yields . 60 cubic feet.

How thick should a concrete slab be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

How much is concrete per post?

Remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground). The calculator will indicate the number of 50 lb. bags of QUIKRETE® Fast-Setting Concrete you need.

How many square feet is a yard of concrete 4 inches thick?

81 square feet

How much concrete does a bag of cement make?

one 20kg bag will cover an area of 1.1m2 to a depth of approximately 10mm. or 108 x 20kg bags equates to one cubic metre of mixed concrete.

How much does a 20x20 concrete patio cost?

The average cost to pour a concrete patio is $2,433, with most homeowners paying between $1,212 and $4,318 for professional installation. Labor costs can run between $3 and $10 per square foot and materials cost $1 to $2 per square foot.

How many 80lb bags of concrete make a yard?

How many 80 lb bags of concrete do I need for 1 yard? The finished volume of an 80# bag of Sacrete or Quikrete (pre-mixed cement, sand and gravel) is 0.6 cubic foot (stated on the bag). There are 27 cubic feet in a cubic yard. Dividing 27 cubic feet by the volume of the bag will give you the number of bags you need.

Can you pour your own concrete slab?

The bulk of the work for a new DIY concrete slab is in the excavation and form building. If you have to level a sloped site or bring in a lot of fill, hire an excavator for a day to help prepare the site. Then figure on spending a day building the forms and another pouring the slab.

What is the minimum amount of concrete you can order?

The minimum concrete delivery for ready-mix concrete is a truckload of about 10 cubic yards at $119 to $147 per cubic yard. If you order less than 10 cubic yards of cement, there will be an additional fee of approximately $53 per cubic yard.