How many miles is a treadwear rating?

A tire with a treadwear rating of 320 should last for approximately 40,000 miles. This is a lower-middle level treadwear rating. Tires with a high-end rating of over 500 should deliver approximately 80,000 miles.

Consequently, how many miles is a 400 treadwear rating?

The first portion of the rating is a 2 – or 3-digit number that represents relative treadwear, or how long the tire's tread is expected to last against the standard test tire. The test track they use is a 400-mile loop for a total of 7,200 miles. If a tire is rated 100, it is expected to last as long as the test tire.

Additionally, what is a good treadwear rating? In basic terms, and in the spirit of the concept, the higher the UTQG treadwear rating, the greater the tire life. A tire with a "600" treadwear rating is forecasted to last twice as long as a tire with a "300" rating, and should accumulate three times the mileage of a "200" rated tire.

Just so, how many miles does a tire last?

50,000 miles

How long will 200 treadwear last?

A tire rated at 200 has a projected tread life of 60,000 miles.

34 Related Question Answers Found

What does UTQG 400 AA mean?

Uniform Tire Quality Grading

Is 480 treadwear good?

The bottom line on the treadwear ratings is that they are relative to the other tires a particular manufacturer makes. So a 480 in Goodyear's line is different than a 480 in Pirelli's line. Or Kuhmo's line. But generally when you hit the 400's and above, you're into pretty durable tires.

How many miles is 2 32 tread?

If you assume a linear rate of tread consumption (which is not necessarily a good assumption) then it takes ~3,500 miles to use up 1/32" of tread, given your driving habits. Therefore you should get to 28,400 miles before your tires get down to 2/32". This also implies that your tires had ~4/32" depth 5,000 miles ago.

Why do new car tires wear out so fast?

The tire manufacturer bears that responsibility. The OEM tires that came with your car can't be replaced (which is a good thing) after they've worn out. And they will wear out much sooner than they should. This is because virtually all auto manufacturers specify very soft rubber which means they wear out too fast.

What does 500 AA stand for on a tire?

Over 500= about 80,000 miles. 5. Traction – The traction grades, from highest to lowest, are AA, A, B, C. This rating represents the tires ability to stop on wet pavement as measured under controlled conditions.

What does a 300 treadwear rating mean?

Treadwear grade

A government-required number that indicates a tire's expected wear. A grade of 300 denotes a tire that will wear three times as well as a tire graded 100.

What does Traction AA mean on a tire?

Traction grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on asphalt and concrete test surfaces. As of 1997, the traction grades from highest to lowest are “AA”,”A”,”B” and “C”. The grades do not take into consideration the cornering or turning performance of a tire.

Which tires last the longest?

The longest lasting tires in Consumer Reports' tests are the Pirelli P4 Four Seasons Plus. They claim 90,000 miles, and Consumer Reports estimates they'll go 100,000.

Do you really have to rotate your tires?

It is usually recommended to rotate tires every 5000 to 10,000 miles, but is it really necessary? The reason for rotating tires is to equalize wear. Front tires wear a lot faster than rear tires because as you make turns there is more pressure on the outer edges of the front tires.

Can I replace just one tire?

If you choose to only replace one tire, pair it with the tire that has the second-most tread depth. They should both be mounted on the rear of your vehicle. Replacing only one tire is not as ideal as replacing two or all four tires.

Are expensive tires worth it?

It's no surprise that the more expensive tires generally stop better when brand new. In some cases though, it's not by much. The answer isn't simply that you should buy the most expensive tire out there. In fact, the data points to some great deals that can be had on cheap tires.

When should I replace my tires mileage?

"The tires are designed nowadays to do 50-60,000 miles. But when they get down to those wear bars, you don't have as much tread," Allen said. "And I recommend right when it gets down to those bars, you replace your tires." Other factors that you should be on the lookout for are weather cracking and sidewall integrity.

How much does it cost to get 4 new tires put on?

According to recent reviews, Angie's List members report paying an average cost of $637 to replace four tires, with a range of $525 to $725. According to CostHelper, a standard, all-season tire costs between $50 and $200 each with an average price of $80 to $150.

When should I replace tires on my car?

"Tire Rack's advice is that if rain and wet roads are a concern, you should consider replacing your tires when they reach approximately 4/32" of remaining tread depth." Obviously the tread will wear away over the life of the tire and the volume of its tread grooves will be reduced.

How do you measure tire tread with a penny?

There are several popular ways to check your tire tread depth. One easy way is the penny test. Simply insert a penny into your tire's tread groove with Lincoln's head upside down and facing you. If you can see all of Lincoln's head, your tread depth is less than 2/32 inch and it's time to replace your tires.

Do front or rear tires wear faster?

Most vehicles are equipped with the same size tire at every wheel position. However, due to a front-wheel drive vehicle's front tires' responsibility for transmitting acceleration, steering and most of the braking forces, it's normal for them to wear faster than rear tires.

Do unused tires go bad?

There is actually an expiration date on tires. Rubber degrades over time and will weaken. I would recommend you trash them. I believe that all tire manufacturers recommend that tires be replaced after six years, regardless of tread depth or apparent condition.