How many cubic feet is an acetylene tank?

Asked By: Qiuhua Burr | Last Updated: 25th April, 2020
Category: sports scuba diving
4.2/5 (2,375 Views . 37 Votes)
The most common heavy duty heating tip sold in the United States can require up to 80 cubic feet per hour of acetylene. The most common acetylene cylinder (#4) usually contains around 130 cubic feet of acetylene.

Click to see full answer


Moreover, how many cubic feet is a standard gas cylinder?

High-Pressure Steel Compressed Gas Cylinder Sizes

Cylinder Size 50 LB/LBX
Approximate Capacity (cubic feet) 335 2
Approximate Capacity (liters) 9373 53.8
Outside Diameter (inches) 9 2
Height (inches) 58.2 12

Likewise, how many pounds of acetylene are in a cylinder? Full, it contains 244 cf (6.9 m 3) of oxygen at a pressure of 2200 psi (15200 kPa) as measured at 200C (700F). The oxygen contained in a full cylinder weighs about 20 lb. (9.1 kg); the cylinder itself weighs about 130 lb.

Besides, how big is a 40 cubic foot tank?

The Luxfer 40 Cubic Foot (5.7 liters) Aluminum Tank is a small compact cylinder that is great for use as a stage bottle for decompression and safety stop use. It is also commonly used by technical divers as a bailout bottle.

What are the sizes of gas cylinders?

Argon Gas Bottle Sizes (Argon Bottle Sizes) - Argon Cylinder Capacity Chart

Argon Gas Bottle Sizes (Argon Bottle Sizes) Argon Gas Cylinder Sizes
Size Height Argon Cylinder Capacity
G2 1460 10.2 m3
E2 780 4.1 m3
D 750 2.0 m3

38 Related Question Answers Found

How do you measure gas in a cylinder?

The following are the simple steps to find how much gas is in a cylinder.
  1. Fill up a jug or bottle with warm tap water.
  2. Pour it down the side of the gas bottle.
  3. Wait 5 seconds.
  4. Using your hands, feel for a temperature change on the bottle.
  5. The part that's cold to touch will indicate how much gas is left.

How much is a cylinder of nitrogen?

Cost is a more complicated issue. Depending on what size of cylinder you want (and what they have available), the nitrogen itself probably isn't that costly, you'd probably pay a few dollars to fill a cylinder (the prices I've seen for a small cylinder are generally under $10.

How tall is a 125 CF argon tank?

Size/Name Cubic Ft Height
80 92 cf 33”
125 125 cf 43”
150 155 cf 46”
250 251 cf 51”

What is the capacity of oxygen cylinder?

It has an interior capacity of 26.73 liters. Therefore, 26.73 liters and 2200 psi. Therefore, 14.7 psi is the pressure at which the oxygen will be used.

How many liters are in a gas cylinder?


A domestic LPG cylinder, which has 14.2 kg of LPG, sells at a subsidized price of Rs 350. The same cylinder is sold to the racketeers at anything between Rs 450 and Rs 500 on the basis of its availability. Since one kg of LPG is equivalent to 1.8 litres, one gets about 24 litres of LPG in a domestic cylinder.

How many cubic feet is an oxygen tank?

So the original B cylinder is now often referred to as an M-6 cylinder because it can hold 6 cubic feet of oxygen.

How much does it cost to fill an oxygen acetylene tank?

Expect to pay around $200 - $300 depending on size of tanks, level of fill, brand and size of torches. If you do got the CL route, make sure they are private cylinders (meaning no company markings on the cylinders), when it comes time to fill, they usually just exchange them.

What size oxy acetylene tanks should I get?

The rule of thumb is you should use acetylene at a rate that is not greater than 15% of the tank in an hour. So if you use acetylene at a constant rate, you should use a tip small enough to get 7 hours use out of the tank. If you really need to crank a bigger flame for a moment, that is not a problem.

How long will a 80 CF argon tank last?

The average industrial supply tank of argon gas, at around 250 cubic feet, will last about 10 hours at a 20 – 25 cubic feet per hour flow rate. Most household tanks are between 60 and 80 cf, and at a 20 cfh flow rate will last around 3 to 4 hours.

How long does the oxygen tank last for?

An E cylinder running continuously at 2 liters per minute would last approximately 5 hours. The next size smaller is the D cylinder, which would last approximately 3 hours of continuous usage at 2 liters per minute.

What is the weight of acetylene?

Acetylene weighs 0.001165 gram per cubic centimeter or 1.165 kilogram per cubic meter, i.e. density of acetylene is equal to 1.165 kg/m³; at 0°C (32°F or 273.15K) at standard atmospheric pressure.

What are the sizes of welding tanks?

Argon Cylinder Sizes and Welding Time Chart
Tanks Size Name and Gas Volume Estimate of Welding Time
Q – 80 cf 4 – 5 hours
S – 125 cf 6.5 – 8 hours
S – 150 cf 7.5 – 10 hours
K – 250 cf 12.5 – 16.5 hours

How do you measure oxygen gas in a cylinder?

The amount of oxygen present inside the cylinder is measured by the pressure at the outlet nozzle. The pressure is measured using a high precision MEMS Pressure Sensor. The output of the MEMS pressure sensor is voltage of the order milli. An amplifier is used to amplify this milli volt signal.

How heavy is a nitrogen tank?


A perfect nitrogen tank for beverage, HVAC, and industrial use.

Quality Features.
Weight 30 lbs
Water Capacity 17.2 lb / 7.8 kg
Tare Weight 28.22 lb / 12.8 kg
Length 20" / 508mm
Diameter 7" / 178 mm

How do I know when my acetylene tank is empty?

Look on your cylinder; there is a tare weight stamped. Weigh the cylinder and subtract the tare weight. Acetylene is 14.5 cu. ft. /#, so you can find out how much you have.

How can you tell if welding gas is empty?

Close the bottle valve, loosen the fitting at the regulator to vent the gas in the line, and read the guage. If the gauge says 1000, that's your "empty", and the gauge is in error. If it says "zero", and returns to 1000 when you (re-tighten the fitting and) open the bottle, you still have lots of gas.