How many chlorine tablets do I need for a 1000 gallon pool?

Asked By: Oumar Elges | Last Updated: 24th February, 2020
Category: sports snooker and pool and billiards
4.7/5 (4,941 Views . 9 Votes)
To use the right number of tablets, always round your pool volume up to the nearest unit of 5,000 gallons. For instance, your pool has a capacity of 20,000 gallons, you would add four chlorine tablets. But if your pool holds just 16,000 gallons, you'd still use four, three-inch chlorine tablets. It's that easy.

Click to see full answer


Beside this, how much chlorine do I put in a 1000 gallon pool?

If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.

Furthermore, how many chlorine tablets do I need for my pool? Place one tablet in pool feeder, floater or skimmer per 10,000 gallons of water every week or as often as needed to maintain a chlorine residual of 1-4 ppm.

People also ask, how much shock do I need for a 1000 gallon pool?

When shocking your 1000 gallons pool, you need to use 0.05 gallons of bleach to take the chlorine level to 5 PPM.

How much chlorine do I put in a 1052 gallon pool?

Whether you have a round ring-top pool or an in-ground pool, maintaining the chlorine balance in the pool prevents bacteria from growing in the water. The basic balance of chlorine to water is between 1 and 3 ppm, or 0.00013 ounces of chlorine per gallon of water.

39 Related Question Answers Found

Can you swim with chlorine tablets in pool?

Answer: Yes, when using tablets they can be present in the water while you swim. Also confirm with a test of the chlorine level to be sure the sanitizer level is safe for swimming.

Can I just throw chlorine tablets in my pool?

The pulverized version of chlorine tablets can be sprinkled directly into your pool water.

Can you put chlorine in a small pool?

Shock your pool with a large dose of chlorine, and wait for the chlorine level to fall below 3 ppm before allowing anyone to use the pool. of bleach for every 100 gallons of water your pool holds (or 1/4 tsp. for every 10 gallons, if you have a smaller inflatable pool).

Is it safe to use bleach in a pool?

Thankfully, you can use Clorox® Regular Bleach2 to treat the water in a children's wading pool. Empty small pools daily. (Clorox® Regular Bleach2 will not harm plastic pools.) Do not reenter pool until the chlorine residual is between 1 to 3 ppm.

How much chlorine do I put in a 5000 gallon pool?


Chlorine Treatment
Pool Capacity Dichlor Fast Tabs
7,5000 1.75 oz 1 Tab
10,000 2.25 oz 1-2 Tabs
12,500 3 oz 2 Tabs
17,500 4 oz 2-3 Tabs

How much bleach do I need for 1000 gallons?

To disinfect a storage tank mix non-scented NSF-approved household bleach (5.25% chlorine) in the reservoir at the ratio of 1 gallon of bleach for every 1,000 gallons of water (i.e., 1 quart for every 250 gallons of water). This will give a chlorine concentration of 50 ppm.

How much water is 1000 gallons?

The average price of water in the United States is about $1.50 for 1,000 gallons.

How much shock Do I put in a pool calculator?

If you need to calculate it yourself:
  • Subtract the FC from the TC to find the CC.
  • Multiply the CC by ten.
  • Subtract the FC from that sum.
  • Find how many ounces of shock will produce a 1 ppm chemical change in 10,000 gallons of water.
  • Divide your pool volume by 10,000 gallons.

How much shock should I put in my pool?

To shock your pool, use 2 pounds of shock for every 10,000 gallons of water, which should raise your chlorine to 10.0 ppm. Depending on your pool, you can use Leslie's Power Powder Plus or Leslie's Chlor Brite. After shocking the pool, run the circulation system for at least 2 hours before adding an algaecide.

Can you put shock and chlorine in a pool at the same time?


You do need to use both tabs and shock. Without tabs, the chlorine shock will dissipate quickly out of the water; without shock, the chlorine level will not get high enough to fully sanitize the water. You should aim to keep the chlorine level at between 1 and 3 ppm.

Is liquid chlorine the same as shock?

The true difference amongst chlorine does not lie in the form it comes in, but rather from being either unstabilized or stabilized. Liquid chlorine and powdered shock have the same active chemical that work to clean your pool, the difference is in the way that you use them.

How many bags of shock do I need to open my pool?

(1 bag) of shock per 10,000 gallons of pool water. That may be fine for normal conditions, but if you have a severe algae attack, a triple shock is needed. 1 bag will get reach 7-9 ppm, but for 30 ppm, you need 3, 4 or sometimes even 5+ lbs per 10,000 gallons of pool water.

When should you shock a pool?

KNOW WHEN IT'S TIME TO SHOCK:
  1. START UP: Shock your pool when you open it for the season to kill algae that has developed in the Spring.
  2. AFTER A PARTY OR HEAVY USE:
  3. AFTER EXTENDED PERIODS OF HOT, SUNNY WEATHER.
  4. AFTER HEAVY RAIN:
  5. SMELL OF CHLORINE OR IRRITATED EYES:
  6. POOL CLOSING:

Why do we shock the pool at night?

Shock your pool late in the evening or at night, when the sun is down, to make sure free chlorine will stay in your water longer. Ultraviolet (UV) rays from direct sunlight greatly reduces free chlorine levels, so shocking during the day will not be very effective.

Do you have to shock a new pool?


Every pool is different, and pools don't need to be shocked, unless they need to be shocked – to remove bacteria, algae, chloramines or other contaminants, or to help clear cloudy pool water or some other water problem. You can test for chloramines and you can see algae, but bacteria and other pathogens are invisible.

How much liquid chlorine do you need to shock a pool with algae?

How much liquid chlorine to shock a pool with algae? The minimum chlorine amount required for this is 30 ppm. Factors that lead to algae outbreak in a pool are many bather load, high temperature levels and more sunny days.

How long do you have to wait to swim after putting chlorine in the pool?

It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.