How long should a linear shower drain be?

Category: style and fashion bath and shower
4.6/5 (860 Views . 37 Votes)
Lengths up to 2 meters – Easy Drain linear shower drains are available in lengths from 200 mm up to 2000 mm and are equipped with our patented technologies.

Correspondingly, how long should a linear drain be?

This depends on the size of the shower area and most importantly the location of the shower drain. Length needs to be the exact distance between both walls, the wall tiles are placed on the shower drain's flange. Length needs to be smaller than the distance between both walls with at least 8-10 cm on both sides.

Also, how long is a shower drain? Linear drains come in many different lengths, up to as long as 72”. It's important to know that both types of drains take the water away with equal efficiency. Unless you have an unusually large amount of water in your shower, either type will work. In most cases a point drain will cost less than a linear drain.

Considering this, are linear shower drains better?

Linear drains do more than look cool and are far beyond an embellishment but an improvement. This essential part of the plumbing system of your shower is now an architectural focal point not just for waste water but to enhance the complete aesthetic of the space.

How do I choose a linear drain?

Free in the floor / against the wall Determine where you want to place your (linear) shower drain. You can choose between “free in the floor” or an “against the wall” installation. We recommend installing your shower drain “against the wall”.

30 Related Question Answers Found

Where should a linear drain be placed?

As a general rule-of-thumb, linear drains are located at either the back or side wall of where the fixtures are installed, or along the threshold or entrance.

Where does a linear shower drain go?

Linear drains can be placed in the center of the shower, as seen in the bathroom below by Tego Bathroom Solutions, as long as they are parallel to the opening of the shower. QuARTz linear shower drains come in a variety of standard sizes ranging from 27.55″ to 55.12″.

What is the best linear shower drain?

Neodrain 24-Inch Linear Shower Drain with Removable Capsule Pattern Grate, Antique Copper color, Oil Rubbed Bronze finish, 304 Stainless Steel Shower Floor Drain, With Leveling Feet, Hair StrainerNeodrain 24-Inch Linear Shower Drain with Removable Capsul… This looks really good in shower.

How far from the wall should a shower drain be?

Rough-In Dimension Terminology
Toilet Shower/Tub
Discharge/Drain Hole from Back Wall 12 1/2" 14"
Discharge/Drain Hole (Vertical) 0" 0"
Fixture (Side to Side Buffer) 15" to 18" min 18" min
Fixture (Front Buffer) 21" min 18" min

How do you keep a linear drain clean?

Tips for Keeping Your Linear Drains Clean
  1. Carefully remove the drain cover. Then, wipe the linear drain down with a paper towel to remove hair, soap scum, etc.
  2. Next, use a scrub brush and water to thoroughly clean the drain cover.
  3. Lay the drain cover aside and clean the gutter or drain base in the same manner as you did the drain cover.

How much does a linear drain cost?

Most linear shower drains cost $200 or more, though you can find some for as low as $100. Because linear shower drains require more coordination between the tile contractor and plumber, you may also need to pay a few hundred dollars more for labor, especially if working with someone who charges hourly.

How do you install a linear shower drain?

We recommend that the linear shower drain installation should preferably be done by trained professionals in compliance with building regulations.
  1. Choose the location.
  2. Prepare your work area.
  3. Calculate the height of the shower drain.
  4. Place the built-in set.
  5. Connect to drainage pipe.
  6. Create a sloped floor.

How does a linear shower drain work?

Linear drains work by allowing the water to flow through the drain and into a trough, or channel, beneath the shower floor, where it enters the regular drainage system.

What is an infinity shower?

Infinity Drain's versatile linear drain systems eliminate the use of a traditional center shower drain, allowing for the floor surface to be pitched in one direction, and resulting in no limitation on tile size or slab material.

What is infinity drain?

About Infinity Drain. Since 2007, Infinity Drain has established a reputation for design-centric, premium quality decorative shower drains. With award winning designs and innovations, including the "Site Sizeable" linear drain, Infinity Drain is helping to shape barrier free bathroom design.

How do you hook up a shower drain to an existing drain?

Use plastic drain pipe and fittings, either PVC or ABS, for the new shower drain.
  1. Turn off the water lines to the area you'll be working on.
  2. Locate the existing drain, and determine the spot where you want to connect the new shower drain.

How do you install a shower base on a concrete floor?

Apply primer and cement to the drain pipe and the flange. Attach them to the drain in the floor. Once the cement dries, put gaskets on the flange and place the pan over the drain. Use silicone to caulk the flange before lining up the drain body's holes with the flange's screw holes.

How far can ap trap be from shower drain?

According to the International Residential Code, the maximum vertical distance between the sink drain and the entrance to the p-trap is 24 inches.

How do you replace a shower drain in concrete?

How to Replace a Shower Drain in a Concrete Slab
  1. Remove the concrete around the drain to expose the flange.
  2. Loosen the bolts that are holding the pipe rough-in and the drain into the concrete floor.
  3. Use the screwdriver to help you apply pressure to the drain flange and turn it in either direction until you break the bond with the pipe cement.

What are the different types of shower drains?

There are more shower drains available than you can count, but they all really fall into two types – point drains and linear drains. Point drains are most common and are what we are used to seeing in showers.