How long can a natural gas BBQ hose be?

Asked By: Ce Spannagel | Last Updated: 3rd January, 2020
Category: home and garden home appliances
4.1/5 (1,502 Views . 16 Votes)
Keep in mind that a natural gas barbecue will likely not work properly with a hose that is any longer than twenty feet in length. After twenty feet, the rubber hoses experience enough loss in pressure that the barbecue may not get enough fuel pressure.

Click to see full answer


Then, how long can a gas hose be?

The maximum recommended length is 1m.

One may also ask, how do you extend a gas line for a grill? Extending Home Gas Lines to an Outdoor Grill

  1. Determine where to tap the gas line. On the first visit, your service person will look for an appropriate place to tap into an existing gas line.
  2. Install a T-fitting.
  3. Run gas lines to the outdoors.
  4. Have the work inspected, if required.
  5. Convert the grill, if necessary.
  6. Testing the fittings.

In this way, can you connect 2 natural gas hoses together?

Yes you can use the extension hose, but you would be better off using a hard line to the spot where you BBQ is, install your shutoff valve and then connect the hose to your natural gas BBQ. This would be a safer method of connection. The natural gas pipe has an inside diameter of .

How often should you change a gas regulator?

Gas regulators should be replaced every 10 years, visual signs of age are usually noticeable. But there is always the date of manufacture stamped into the body of the regulator.

34 Related Question Answers Found

How do I know if my gas regulator is bad?

Signs of possible problems with a propane gas regulator or appliance include lazy yellow or orange flames; a popping noise when turning a gas burner off or on; flames floating above burner ports; roaring noises from burners; flames at the burner air intake; flames spilling out of the burner; and heavy deposits of soot

Is a 20 lb propane tank high or low pressure?

According to the national standards publication NFPA58, a propane tank with 20 pounds (5 Gal) of gas at 70°F would have a pressure of 145 psi; at 90°F, pressure would increase to 180 psi; at 105°F, pressure continues to rise to 235 psi, and at 130°F, pressures of 315 psi would be reached.

How long does a natural gas regulator last?

This customer uses one cylinder of argon every six months, pressurizing the regulator once a week inside a cleanroom where temperature, humidity and other environmental factors are controlled. This regulator may last 25 years or more without refurbishing or replacing any major components.

Can you install a gas regulator upside down?

Proper orientation of appliance gas regulator. The appliance regulators can usually be installed in any direction except upside down (with the cap pointed downward). Check with the install instructions, they should specifically state which ways are recommended.

How do you test a gas regulator?


Install a water column manometer
or a suitable low-pressure gauge or measuring device in the second-stage regulator outlet test tap or in a test tap in the appliance gas shutoff valve at the gas appliance that is most-distant from the gas regulator being tested.

Can natural gas regulators freeze?

When air or other gas expands it tends to get cold. If there is moisture present in the flow it may freeze. The ice may then block flow paths resulting in valve or regulator freeze-up. First heat energy of the gas is converted to velocity energy as gas moves through the valve.

What type of pipe is used for natural gas?

Steel, copper, brass: The most common gas piping is black steel. Galvanized steel, copper, brass or CSST (Corrugated Stainless Steel Tubing) also can be used in some areas, but some utilities specifically prohibit the use of copper. In other areas, the use of copper is widespread.

Can you split a natural gas line?

A tee serves to split service on a line to separate appliances. This is one of the things that you will need. Black iron pipe is in standard use for gas service. In this case you will have one main gas cut-off that shuts down ALL gas to the house and a cut-off for each gas appliance in the house.

Who installs natural gas lines?

One type of plumber that often gets overlooked is the natural gas line plumber, who installs natural gas lines for a variety of home projects. Gas plumbers can install or repair water heaters, HVAC systems, fireplaces, stoves and even outdoor grills.

Does a natural gas BBQ need a regulator?


Do you need to use a natural gas regulator on your NG barbecue grill or fireplace? The answer is both yes and no. If the gas line running the the barbecue grill has a regulator stepping the pressure down to 4″ then it is not necessary to also have a 4″ regulator on the barbecue.

Can a natural gas hose be used for propane?

Propane and natural gas
Gates LP350X hose is designed to convey propane, butane, or a combination of the two. LPG Gas and Natural Gas hose are for outdoor use only, never use Propane or Natural Gas hose indoors or in confined spaces or on vehicles or RVs.

How much does it cost to run gas line for grill?

Cost to Run a Gas Line
To run a new gas line, it'll cost an average of $522. However, it can range anywhere from $120 to $1,350. Most homeowners spend between $256 and $790. Budget $15 to $25 per linear foot for new and replacement lines, including the labor, piping and materials.

Are Natural Gas Grills safe?

First, natural gas grills and propane grills are not the same thing, so be sure to shop for the right type. Some areas require a permit. The safest is with a gas plug safety quick disconnect. Your best bet is to hire a natural gas plumber to do this for you.

How do natural gas grills work?

Natural gas grills work much like standard propane grills in terms of cooking food, but with many additional benefits. Rather than using a propane tank or charcoal, a natural gas grill uses hydrocarbon-based fuels as a heat source.

How long can a propane hose be?


There is no legal limit on hose length. You could daisy-chain a couple or more together if you wanted to. One problem with a very long hose may be safety.

What type of pipe is used for propane?

The propane yard line generally consists of copper tubing or plastic polyethylene piping. The service piping needs to be installed correctly and legally in conjunction with the propane tank for the entire outside portion of the installation to be safe and serviceable.

How far should a built in grill be from the house?

While the consensus above is at least 3 feet away, the United States Consumer Product Safety Commission states to place the grill at least 10 feet away from a house or building. Additionally, you should not use your outdoor grill in enclosed spaces such as a carport, porch, shed, garage, or inside a home or building.