How do you whitewash an old ladder?
Category:
hobbies and interests
woodworking
Take a damp rag and wipe the paint away, giving it the appearance of a whitewash. One of the simplest ways you can repurpose an old wooden ladder is to turn it into a blanket or towel hanger. Lean the ladder against a wall, drape towels or blankets through the rungs. They look great in your bathroom or living room.
Correspondingly, how do you make an old ladder into a shelf?
Instructions
- Prep the ladder. Scrape off any existing paint and sand down any rough edges.
- Paint the boards for the shelf (and the ladder, if necessary). Pour paint into a paint tray or onto a large piece of cardboard.
- Add the boards. Slide the boards onto the ladder to make a shelf.
- Decorate the caddy.
- USE A MINERAL PAINT. Mineral paint is very similar to chalk style paints in that no prep or prime is required.
- USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep-sanded.
- USE A BONDING PRIMER.
- USE A LIQUID SANDER/DEGLOSSER.
Keeping this in consideration, how do you paint an old wooden ladder?
PAINT: Shake your can of Stops Rust Gloss spray paint in Lagoon for one minute after the mixing ball begins to rattle. Then, hold the can 8-12” away from the ladder, and spray in a steady back-and-forth motion. Apply 2-3 light coats to the entire ladder a few minutes apart. Then, repeat this step on the wooden boards.
Sanding. Sanding through the white paint on furniture is a speedy way to make wood furniture look much more rustic and old than it is. To make the wear look natural, sand it with a fine- or medium-grit sanding block on areas that would typically become worn first, such as the armrests and seat on a rocking chair.