How do you use a oscillating saw?

Asked By: Deni Zalama | Last Updated: 30th March, 2020
Category: hobbies and interests woodworking
3.9/5 (86 Views . 29 Votes)
But you may be able to pull off the impossible by using an oscillating saw tool equipped with a high-quality bimetal cutting blade. Angle the tool against the nut and start it off at slow speed until it cuts a groove. Then increase the speed and keep sawing until you're about three-quarters of the way through.

Click to see full answer


Keeping this in consideration, when would you use an oscillating tool?

10 Uses for Your Oscillating Multi-Tool

  1. Trimming pipes and screws. Fitted with the right accessory blade, your multi-tool can become a plumber or labourer's best friend.
  2. Plunge cuts in your decking.
  3. Trimming wood and floorboards.
  4. Cutting out openings in drywall.
  5. Removing rust from metals.
  6. Sanding down furniture.
  7. Scraping adhesive.
  8. Removing mortar.

Also, how does an oscillating tool work? The oscillating tool works by moving an attachment at high-speed in an rotating or back-and-forth motion that allows for precise control with minimal vibration. Attachments include saw blades of various shapes, grinding discs, and sanding pads. An oscillating tool is capable of endless home improvement tasks.

People also ask, what is an oscillating multi tool used for?

The oscillating multi-tool is one of the handiest tools you can have around the jobsite or workshop. It's versatility allows you to accomplish numerous tasks that would be impossible with other tools. You can sand; saw metal, wood, and drywall; make large holes; plunge cut into hardwood; or undercut a doorway.

Are oscillating tools worth it?

For the most part, yes. In two out of the three tests (cutting and sanding), even those on the bottom of the oscillating pile were more effective than the control tools.

38 Related Question Answers Found

Can you cut wood with an angle grinder?

Cutting wood with an angle grinder carries the risk of injury to the tool operator. Angle grinders typically spin the installed disc at 10,000 - 15,000 RPM. You might safely use it for small cutoffs but there are much better tools for safely cutting wood - circular saws, jig saws, oscillating tools, reciprocating saws.

Are oscillating tool blades universal?

Compatibility. The blade is not universal and isn't compatible with Fein Starlock, Bosch and Dremel quick release tools, Dremel MM40/MM45 and Bosch MX30 and needs an adapter for Fein Supercut and Rockwell & Worx tools.

Can oscillating tool cut brick?

Multi-tool blades come in many shapes and sizes. Cutting through cement, brick or stone can be very easy and your multi-saw will shine like a star when you use the right oscillating blade. However, for the toughest materials like rock, concrete, brick, stone, and grout, the best option is to use is a diamond blade saw.

Are multi tool blades universal?

When it comes to the universal multi tool blades; with so many options available, one of the biggest issues for users is separating the wheat from the chaff. It's important that the blades are of a decent quality, as the machine is only as good as the blade attached.

Can oscillating tool cut concrete?


Cut Through Concrete with Oscillating Tool Accessories
By adding a carbide grit oscillating tool blade, you can use your oscillating multi-tool to cut and shape concrete. You can also use the device for jobs like grout removal.

Can an oscillating tool cut tile?

Oscillating multi-tool blades are used for cutting holes in tiles, and they're even great for tight edges. They're ideal for making direct cuts on tile, and you can trim, shape, and file tile with ease. Start cutting the tile little by little, removing the dust that's kicked up as you go.

Can you use a multi tool as a grinder?

If you don't own an oscillating multitool, buy one and you'll wonder how you got along without it. It's a saw, scraper, sander, and grinder in one handy power tool. It not only does those jobs, it does them in inaccessible places, speeding difficult jobs to completion in the process.

Will an oscillating saw cut skin?

The reason they won't cut skin but will cut the cast is strictly due to rigidity. The "blade" isn't actually sharp, but just a thin disk, and the "cut" it produces in the cast is just a very thin line of ground away plaster.

Which is the best oscillating multi tool?

So here is my list of The 10 Best Oscillating Tools.
  • DEWALT DCS355D1 20-Volt Cordless Oscillating Tool.
  • PORTER-CABLE PCE605K52 3-Amp Oscillating Tool.
  • Rockwell RK5151K 4.2-Amp Oscillating Tool.
  • Dremel MM40-05 Multi-Max 3.8-Amp Oscillating Tool.
  • Bosch StarlockPlus 4.0-Amp Oscillating Tool.

Are multi tools any good?


The best multi-tools are great for all of the above. No, this multi-tool is the powerful and versatile, oscillating variety that can sand, cut, grind and scrape its way through most building materials, including wood, drywall, grout, plastics and even metal.

What is the best multi tool to buy?

The Best Multi Tool
  1. Leatherman – Surge Multi Tool. See More Reviews.
  2. Gerber Dime Multi-Tool. See More Reviews.
  3. Victorinox SwissTool Multi Tool.
  4. Leatherman – Style PS Multitool.
  5. Gerber Center-Drive Multi-Tool.
  6. Gerber Suspension Multi-Plier Multi Tool.
  7. Leatherman – Style CS Multitool.
  8. Leatherman – Skeletool Multitool.

How deep can an oscillating tool cut?

1-5/8" Wide Stainless Steel+CrV Universal Oscillating Long Reach Saw Blade. Saws up to 3" deep. Great for Flush Cuts and Plunge Cuts in Plastics and Wood.

How do you cut a straight line with an oscillating tool?

Use a Straightedge for Straight Cuts
Use the oscillating tool to make a clean, precise cut and make the problem go away. Use a straightedge if you need a guide for the oscillating saw blade. Just watch that the blade doesn't gouge the straightedge and go off-course.

Can a oscillating tool cut metal?

By using an oscillating tool, you can cut metals like an expert craftsman, achieving impeccable results. Different materials need different blades to cut them. For metals, bimetal and semi-circular blades are what get the job done well.

How do you cut drywall with oscillating tool?


Fit a drywall blade in your oscillating multi-tool. Something like a semicircle HSS blade can be good for cutting drywall. If you are cutting a drywall sheet down to size, use a work support to provide a stable surface for making your cuts. Power the tool up and start making your cuts along the lines.

How does an oscillating sander work?

The oscillating spindle sander, in addition to the steady rotation of the drum, moves the drum up and down during the rotations. This helps prevent static friction, which causes burns and band marks on the wood. It also increases the life of the sanding sleeve by spreading the wear across a wider surface area.

What is a rotary tool used for?

rotary tool is handheld power tool with rotary tip
Sanding drums can be attached for sanding and carving bevels. Set the rotary tool's speed at medium when using a sanding drum. Buffing/polishing bits are attached to a rotary tool to add shine to metal surfaces. Carbide bits are used for etching or carving.