How do you tune up a push mower?

Category: home and garden home appliances
4.9/5 (68 Views . 24 Votes)
How To Tune Up a Lawn Mower
  1. Disconnect the Spark Plug. Always disconnect the spark plug before starting work on your lawn mower.
  2. Drain Engine Oil. Check your owner's manual to see how to drain the oil from your lawn mower.
  3. Replace the Air Filter.
  4. Change the Spark Plug.
  5. Sharpen the Blade.
  6. Replace Oil and Gas.
  7. Reconnect the Spark Plug Wire.



Thereof, how much does it cost to tune up a lawn mower?

A professional tuneup often costs between $50 and $100 for a push mower. The costs are minimal compared to repair costs if a neglected mower breaks.

Subsequently, question is, what is included in a lawn mower tune up? The three main components involved in a mower tune-up are the air filter, spark plug and oil, all of which must be changed.

Secondly, how do you tune up a MTD lawn mower?

General Walk-Behind Mower Maintenance

  1. Step 1: Position the lawn mower for its tune-up.
  2. Step 2: Disconnect the spark plug wire.
  3. Step 3: Inspect the spark plug for wear and tear.
  4. Step 4: Treat your lawn mower's fuel for maximum performance.
  5. Step 5: Change your lawn mower's oil.

How often does a lawn mower need a tune up?

I tune it up every spring, and it always runs on fresh fuel. How long can a mower go between tuneups? The tuneup interval for a typical small engine on a mower is about 50 hours or once a season, whichever comes first, but there are exceptions, according to manufacturers.

36 Related Question Answers Found

When should I change my lawn mower spark plug?

Replace spark plugs as often as is recommended by the manufacturer.
  1. Change spark plugs at the beginning of every mowing season (in the spring) and/or every 100 hours of use.
  2. Use the same spark plugs recommended by the manufacturer of your lawn tractor or push mower.

Does my lawn mower need a new spark plug?

If its top is rounded, then the spark plug must be replaced. If the spark plug is in good shape but is black with carbon or wet with gasoline, then a good cleaning with a wire brush and adjusting the gap between the electrodes may be all that's needed for the spark plug to restore power to the mower.

What can I do with an old lawn mower?

Answer: To dispose of an old lawnmower, call your local waste hauler and schedule a bulky item pick-up. If your lawnmower contains gasoline, it will need to be removed and taken to a location that collects household hazardous waste.

How often do you change the oil in a lawn mower?

Most mower engines need their oil changed every 20-50 hours of operation. A mower's owner's manual will indicate how often to perform oil changes on the mower. At the very least, an oil change should be done annually with other seasonal tune-up maintenance.

Is it worth fixing a lawn mower?


So expensive, you may want to purchase a new mower instead. Many lawn mower owners go by the three-year rule. Of course, the easy repairs are not considered a problem and even some expensive repairs may be worth it if your mower is less than three years old, but not worth it if the machine is older.

Do lawn mower spark plugs need to be gapped?

Why the Spark Plug Gap Is Important
The distance between the electrodes must be properly set, or gapped, so that the fuel is properly combusted. A plug that is not gapped correctly can potentially result in the fuel mixture being ignited too early or result in excessive fouling of the plug.

Should you run the gas out of your lawn mower?

Empty the gas tank
Unused gas left in a mower over the winter can get stale, gumming up the carburetor and inviting rust. First, add fuel stabilizer to the tank, then run the mower to distribute it through the system. Turn the mower off and allow the engine to cool, then siphon excess gas into a clean can.

Can you make money repairing small engines?

Small engine repair businesses can be extremely profitable, but they will need a high volume first. An owner would need to repair 6 – 8 lawn mowers a day at a $45 profit to make $90,000 a year.

How often should I service my lawn mower?


We recommend servicing your yard equipment once a year. While it may not be necessary to change all of the serviceable items such as spark plugs, air filter, oil, fuel filter, blades, tires and belts, it is important to check those items regularly.

How do I service my petrol lawnmower?

8 Maintenance Tips to Keep Your Lawn Mower Running
  1. Read the owner's manual.
  2. Drain the gasoline at the end of each mowing season.
  3. Check the oil.
  4. Clean out the undercarriage.
  5. Inspect the air filter.
  6. Change the spark plug.
  7. Sharpen the blade.
  8. Get a professional tuneup.

Does Home Depot tune lawn mowers?

Before replacing an old tool that has stopped working, consider taking it to The Home Depot for repair. Our experts are experienced in power tool and lawn mower repair and will service your broken tool no matter the brand or where you bought it. We also offer a 90-day service warranty on all tool repairs.

How do you use a Briggs and Stratton lawn mower engine?

How to Get My Briggs & Stratton Lawn Mower to Start
  1. Check the manual that came with your mower to determine the type of ignition system it has.
  2. Locate the priming bulb.
  3. Squeeze the handle lever to disengage the engine brake, if there is one.
  4. Start a mower equipped with the Ready Start Electric ignition system by turning the key to the Start position.

What is a tune up?

A car tune-up is a type of preventive maintenance performed on a vehicle to ensure it continues to perform well. The tune-up should also include cleaning or replacing the spark plugs and, on older cars, the distributor cap and rotor.

How do you fix a push lawn mower?


How to Repair a Lawn Mower Engine.
  1. Step 1: Disconnect the Spark Plug. Before you do anything with the lawnmower you should disconnect the sparkplug.
  2. Step 2: Pre Diagnoses.
  3. Step 3: Ignition System.
  4. Step 4: Removing a Flywheel.
  5. Step 5: Cleaning the Carburetor.
  6. Step 6: Cleaning the Carburetor.
  7. Step 7: Fuel Tank and Lines.
  8. Step 8: Intake and Exaust Valves.

How do you adjust a Briggs and Stratton carburetor?

Locate the idle adjustment screw on the side of the carburetor. Gently turn the screw clockwise with a flathead screwdriver until the valve touches the seat. Then, back the screw off counterclockwise one-and-a-half turns.

How do you fix a Briggs and Stratton lawn mower?

Your Mower Won't Start:
  1. Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten.
  2. Dirty Air Filter: Clean or replace.
  3. Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas. If this doesn't work, you might need a new fuel filter.