How do you start a Craftsman rototiller?

Category: home and garden home appliances
4.3/5 (1,306 Views . 16 Votes)
How to Start a Craftsman Tiller
  1. Move the Craftsman tiller to the area you want to till.
  2. Push the throttle lever to the "fast" position and place the choke in the "Choke" position.
  3. Grasp the Craftsman tiller handle with one hand and the pull rope with your other hand.
  4. Pull the rope quickly and slowly guide the rope as it recoils.



Also question is, how do you start a rototiller?

How to Start a Rototiller Engine

  1. Fill the tiller's fuel tank with fresh, stabilized gasoline.
  2. Check the oil level in the rotor tiller's crank case.
  3. Prime the tiller's carburetor by pressing on the primer bulb multiple times, or activate the choke on the tiller's carburetor.
  4. Pull on the starter handle sharply multiple times until the engine catches.

Beside above, why does my tiller keep dying? Check the fuel level—low fuel in the gas tank could cause the engine to die. A blocked vent on the gas tank cap could also cause the engine to die; loosen the gas cap so air can flow into the tank but don't remove the gas cap completely. Then start the engine and see if it runs. If so, clean or replace the gas cap.

Similarly, are Craftsman Tillers good?

As a solid midrange gas tiller for a small or medium garden, the Craftsman 208 cc Dual Rotating Rear Tine Tiller is a good option. While it doesn't offer any real standout features, it covers all the basics and is popular because of its durability and reliability.

How do you fix a tiller that won't start?

Tiller: Engine won't start. A dirty carburetor, bad gasoline, failed spark plug or broken recoil starter can prevent the tiller engine from starting. Stale gas won't start the engine. If you left gas in the fuel tank during the winter without adding fuel stabilizer, drain the tank and fill it with fresh gas.

20 Related Question Answers Found

How do you repair a rototiller?

How to repair a broken rototiller belt
  1. Step 1 — Remove the bolts holding the belt keeper in place (behind the engine's pulley); pull the keeper off.
  2. Step 2 — Remove the idler pulley bolt; pull the idler pulley off.
  3. Step 3 — Pull off the drive belt, freeing it from the engine and transmission pulleys.

Who makes Craftsman rototillers?

Craftsman tillers are manufactured by Echo, which makes two styles, and Keyang, a Korean manufacturer. Tillers are also manufactured by MTD, which is now Ryobi, based in Japan.

How does a rear tine tiller work?

Rear-tined tillers have wheels in the front that are mounted on a turning axel like a car. In this case, the wheels pull the unit forward when put in gear and the tines' only job is to dig. Most times, the rear-tines spin in the opposite direction of travel to provide more friction, which results in deeper digging.

What is a dual rotating rear tine tiller?

Dual Rotating Rear Tine Tiller. This easy-to-use, true dual-rotation garden cultivator delivers unmatched ground breaking and garden prep in any soil type. With a forward rotation for cultivation and a counter rotation for deep soil tilling, the high-powered engine delivers optimal torque and rotational speed.

How much do tillers weigh?

Consider tiller weight
Most rear tine tillers will weigh between 150 and 200 pounds.

How does a tiller work?

A front-tine tiller places its blades ahead of its wheels, and all turn in the same direction: forward. Pushing down on the handle lifts the front, preventing the tines from digging in while allowing you to direct the tiller on its wheels. A rear-tine tiller, on the other hand, places its blades behind the wheels.

What is the best rated rear tine tiller?

Top 10 Best Rear Tine Tillers of 2019
  • Southland SRTT196E OHV. 9.6. 72919.
  • Earthquake 7055C Briggs. 8.4. 79999.
  • Husqvarna CRT900L 960930026. 8.2. 79999.
  • MTD Gold 21AB45M8704. 8.2. 92399.
  • Troy-Bilt Pro-Line FRT. 7.6. 129900.
  • Earthquake 6015V Viper. 6.4. 69999.
  • Troy Bilt Pony. 109900.