How do you set the clock on a 2002 Dodge Dakota?

Category: automotive auto safety technologies
4/5 (63 Views . 39 Votes)
How to Set My Dakota Truck Clock
  1. Turn the Dakota's ignition on. Find the "Time" button on the top part of the radio control panel.
  2. Push and hold the "Time" button. After a couple of seconds, you'll notice the hour display starts to blink.
  3. Turn the "Tune/Scroll" knob to adjust the hour. When the hour is correct, push the "Tune/Scroll" knob.



Likewise, how do you set the clock on a Dodge?

OPTION 2

  1. Turn the key to the ON position (DO NOT start the ignition).
  2. Press and HOLD the TIME button to adjust the clock.
  3. Turn the DIAL on the RIGHT to change the HOUR.
  4. Press the DIAL to switch to the MINUTES.
  5. Press the DIAL again to finalize your desired time.

Beside above, how do you set the clock on a radio? How to set the date and time on the clock radio.
  1. Press and hold the - TIME ZONE button for at least two seconds until the area number 2 flashes in the display.
  2. Press the TIME SET +/- button repeatedly to select one of the following: NOTES: By default, the TIME ZONE setting is set to Eastern Standard Time (EST).
  3. Press the - TIME ZONE button to set.

Then, how do you set the clock on a 2002 Dodge Durango?

How to Set the Clock in a Dodge Durango

  1. Locate the "Time" button in the upper right corner of the audio systems panel in your Dodge Durango.
  2. Use the "Tune/Audio" control dial located on the right side of the audio systems panel to set the hour on the clock.
  3. Press the "Tune/Audio" control dial to advance the setting to the "minutes" digits.

How do you set the clock on a 2004 Dodge Dakota?

How to Set My Dakota Truck Clock

  1. Turn the Dakota's ignition on. Find the "Time" button on the top part of the radio control panel.
  2. Push and hold the "Time" button. After a couple of seconds, you'll notice the hour display starts to blink.
  3. Turn the "Tune/Scroll" knob to adjust the hour. When the hour is correct, push the "Tune/Scroll" knob.

16 Related Question Answers Found

How do you change the time on a Dodge promaster?

Clock Setting
  1. Push the Menu button at the bottom of the radio, and push the Enter/Browse. button for System Settings.
  2. Adjust the hours or minutes by turning the Tune/Scroll knob, then pushing the. Enter/Browse button to move to the next entry.
  3. Once the time is set, press the "Back" button to exit the time screen.

How do you set the clock on a 2009 Dodge Journey?

Dodge Journey: How To Set The Clock
  1. With your vehicle in the ON position without starting the engine.
  2. Press IN the PUSH ON/VOLUME knob located on the LEFT.
  3. Press SETUP.
  4. Located on the RIGHT, turn the PUSH AUDIO/SELECT/TUNE SCROLL knob until you see SET CLOCK on the screen, then press it IN.
  5. Rotate the knob to input the HOUR.
  6. Press the knob IN.

How do you set the clock on a 2003 Dodge Durango?

Clock Setting Procedure 1. Press and hold the time button until the hours blink. 2. Adjust the hours by turning the right side Tune / Audio control.

How do you set the clock on a 2006 Dodge Durango?

Press and hold the time button until the hours blink. Adjust the hours by turning the right side Tune / Audio control. After the hours are adjusted, press the right side Tune / Audio control to set the minutes. Adjust the minutes using the right side Tune / Audio control.

How do you set the clock on a 2008 Dodge truck?


How to Set the Time in a 2008 Dodge Caliber
  1. Turn the Caliber's ignition on. Locate the "Time" button on the top panel of the radio.
  2. Turn the "Audio" knob on the right side of the radio to adjust the Caliber clock's hour.
  3. Push the "Audio" knob in to save the changes made to the hour.
  4. Turn the "Audio" knob either to the right or left to set the minute.

How do you change the time in a Dodge Grand Caravan?

1- Put the key in the ignition, and turn it just so the radio comes on (you don't have to start the car). 2- Press the Set & Select buttons at the same time (they're on the bottom right side of the radio panel). Then, the hour should be ready to set. 3- Use the Seek button, and arrow up or down, to the correct hour.

How do you change the time in a 2007 Dodge Caliber?

Just hold down the Clock or Time button until the time starts to flash and then use the knob on the right hand side of the radio to adjust the time..