How do you reset a Bosch silence plus 44 dBa dishwasher?

Asked By: Magueye Zheurov | Last Updated: 10th May, 2020
Category: home and garden home appliances
4.4/5 (1,962 Views . 12 Votes)
  1. Shut the door completely.
  2. Press the main power switch to turn unit on.
  3. To reset, refer to “Cancel a Cycle” in this manual.
  4. To reset, refer to “Delay Start” in the “Wash Cycles and Options” section in this manual.
  5. Check circuit breaker.
  6. Select a cycle and close the door.
  7. Check and turn on water supply.

Click to see full answer


Keeping this in view, how do I reset my Bosch silence plus dishwasher?

To reset the modern Bosch dishwasher, press and hold the start button for about 3 to 5 seconds. On some older Bosch models, the reset feature may be called “cancel” or “drain”. These older models require a specific Button Press Sequence or what we in the biz call a Key Dance to complete.

One may also ask, how do you reset a dishwasher? Try pressing the "Start/Reset" pad to reset the dishwasher and wait 2 minutes. If the problem persists, reset (reboot) the dishwasher by turning off power to the unit at the house circuit breaker/fuse box for 30 seconds. Restore power and the dishwasher should function normally.

Furthermore, how do you start a Bosch Super silence dishwasher?

Press the "Start" button to begin the wash cycle. Alternatively, press the "Delay Start" buttons to set your dishwasher to start at a later time, such as in the middle of the night. After the cycle has completed, the dishwasher will automatically turn off.

Where is the reset button on a Bosch dishwasher?

The most standard way to reset a Bosch dishwasher is simply to press down on the Start button for 3 seconds. The Start button is often labelled with “Reset” as well, or even “Reset 3 Seconds”. For most issues, like a frozen display, this will clear the settings and allow you to begin using the dishwasher again.

32 Related Question Answers Found

Why is my Bosch dishwasher not starting?

Cycle Interruption
A Bosch dishwasher dues not fill with water if the previous cycle was interrupted. Reset the dishwasher by pressing and holding the "Start" button for at least three seconds. Depending upon the Bosch dishwasher model you have, you also can push the "Cancel-Reset" button to reset the dishwasher.

How do you force a Bosch dishwasher to drain?

How to Force Cancel & Drain a Bosch Dishwasher
  1. Push "Start" on the front of the dishwasher for three seconds to cancel the cycle.
  2. Wait at least one minute for "Clean" to light up on the dishwasher's display.
  3. Press "On/Off" to finalize the canceled cycle, and pull the dishwasher's door handle toward you to open the door and access the dishes.

How do you reset the cycle on a Bosch dishwasher?

How to Cancel a Wash Cycle on a Bosch Dishwasher
  1. Open the dishwasher door. Do not open the door all the way, just far enough to expose the control panel.
  2. Press and hold the "Start/Reset" button. When the active indicator light is off, release the button.
  3. Close the dishwasher door.
  4. The dishwasher will beep to signal that it is done draining.

How do I use my Bosch silence plus 50 DBA?

Steps
  1. Turn on your dishwasher.
  2. Using the left and right arrows, choose either the Heavy Wash, Normal Wash, Auto Wash, or Half Load cycle.
  3. Press the Sanitize button.
  4. From a nearby tap, let the hot water run for 10 seconds.
  5. Press the Start button.
  6. Once the cycle is complete, the Sanitized light should be lit up.

Why is my Bosch dishwasher red light blinking?


Obviously, the flashing red light indicates door not latched. The fix is to reset the door latch or just have it replaced. Dishwasher is 4 years old and this was the first problem.

Do Bosch dishwashers have a fuse?

Bosch Dishwasher won't start. The door switch prevents the dishwasher from running while the door is open. The thermal fuse shuts off power to the dishwasher if it overheats. If the thermal fuse blows, it will prevent the dishwasher from starting.

What does the tap symbol mean on a Bosch dishwasher?

Tap indicator lights up
According to the instructions for Bosch dishwashers, if the indicator just lights up, it means that: The water supply hose is bent. The water tap is closed. The filter in the supply hose is clogged. Filters are clogged or blocked.

Is 44 decibel dishwasher quiet?

Dishwasher noise levels are rated in decibels, the lower the decibel number the quieter the dishwasher. A difference of just a few decibels may not seem to be much, but a dishwasher that is just one decibel more is actually 30 percent louder. However, buying a dishwasher at 44 DBs is quiet enough.

How do I change the settings on my Bosch dishwasher?

How to Adjust Factory Settings on a Bosch Dishwasher
  1. Change the desired language by opening the dishwasher door and pressing the "On/Off" button.
  2. Adjust or disable the signal tone by pressing and holding the right "Cancel/Reset" button and the "On/Off" button at the same time.
  3. Change the dishwasher salt setting for use with the water softening system.

How do I troubleshoot my Bosch dishwasher?


Bosch Dishwasher Troubleshooting
  1. Make sure the dishwasher is switched off.
  2. Press and hold the Power Scrub Plus and Regular Wash buttons.
  3. Turn on the dishwasher, then release the two buttons.
  4. The light above each of these buttons should flash.
  5. Start the test cycle by pressing the Power Scrub Plus and Regular Wash buttons again.

What is Auto Wash on Bosch dishwasher?

Your dishes might be dry enough, or you might have to use a lot of rinse agent, keep the door open after the wash to let it air-dry, or towel-wipe. AUTO WASH – this is the “go-to” wash for just about any typical load.

How do I clean my Bosch dishwasher?

Use the Bosch dishwasher cleaner a few times a year to remove greasy residues. Simply add one box of cleaner to the bottom of your empty dishwasher and run the hottest, longest cycle. To remove hard water deposits and limescale buildup, use the Bosch descaler a few times a year.

Can't change Bosch dishwasher settings?

For Bosch Dishwasher Ascenta models, open the door to reset it. Hold the Start-Reset button for about 5 seconds or until the Active indicator turns off. Shut the door of the dishwasher to allow it to thoroughly drain before turning it off. When the dishwasher completes draining, it beeps to indicate that it is done.

What does e15 mean on my Bosch dishwasher?

Code e15. A Bosch dishwasher error code e15 implies that the appliance believes there isn't any water in the dishwasher. And it's extremely likely that the dishwasher has a small leak. This leads to water collecting in the base plate at the bottom of the machine. And your Bosch dishwasher not draining at end of cycle.

Why is my dishwasher not starting?


If your dishwasher won't start, the problem could be the door latch or door latch switches. The door latch assembly is used to hold the door closed during the cycle to prevent water from leaking and it also incorporates the door latch switches that supply power to the dishwasher controls.

Is there a reset button on dishwashers?

To reset it, you will have to have the door open. It can not be latched. Press "Heated Dry," "Normal," "Heated Dry," "Normal" within three seconds of the first pressed button. Now close the door, this should reset your dishwasher.