How do you make homemade shiplap?

Asked By: Don Enkirch | Last Updated: 3rd June, 2020
Category: home and garden landscaping
4.5/5 (34 Views . 37 Votes)
  1. Step 1: Getting the Table Saw ready. Set the table saw to cut 8-inch width strips.
  2. Step 2: Cutting the wood. To keep the cost down, we used Luan Plywood.
  3. Step 3: Finding the Studs.
  4. Step 4: Marking the Studs.
  5. Step 5: Nailing the boards.
  6. Step 6: Making cutouts for light switches.
  7. Step 7: Finishing the wall.

Click to see full answer


Keeping this in consideration, can I make my own shiplap?

With a table saw and dado blade, you can make your own shiplap siding in no time at all. With the right tools, it's easy and efficient to make your own shiplap siding. To make a more traditional shiplap joint, simply cut one rabbet at 1/2-in. wide, and the other at 3/4-in.

Subsequently, question is, how is shiplap made? A little light internet research reveals that shiplap is a kind of wooden board that's often used for constructing sheds, barns, and other rustic buildings. Traditional shiplap has a rabbet (or groove) cut into the top and bottom, which allows the pieces to fit together snugly, forming a tight seal.

Also to know, what material do you use for shiplap?

MDF baseboard molding for shiplap walls We used a 5 inch (1/2 inch thick) MDF (medium density fiberboard) baseboard molding as our plank material. It's more affordable than wood, but really perfect for this type of installation.

What kind of wood do you use for shiplap?

The Best Wood for Shiplap "When it comes to water resistance (think bathroom walls), cedar works best. But if moisture is not an issue, you can make shiplap planks out of cheap, pine wood."

39 Related Question Answers Found

How do you turn plywood into shiplap?

  1. Step 1: Rip plywood into 6 inch wide planks.
  2. Step 2: Router planks.
  3. Step 3: Cut planks down.
  4. Step 4: Paint shiplap planks.
  5. Step 5: Remove baseboards.
  6. Step 6: Scrape wall under baseboards.
  7. Step 7: Remove outlets and/or light switches.
  8. Step 8: Attach bottom boards with level.

How wide should shiplap boards be?

x 6 in. Shiplap Boards. 1x6 shiplap boards are the most commonly used width of shiplap and also the most traditional. When installed on a wall, the 6-inch width seems to be in the perfect spot of not too wide and not too thin, giving it a more contemporary look.

How much does a shiplap wall cost?

Shiplap wood prices range between $2.50 and $7.00 per square foot for real boards. On average, shiplap interior installation costs $1,000, with most homeowners spending between $500 and $1,500 for one room. Installing exterior shiplap costs $4,000, with most homeowners spending between $2,800 and $7,500.

Can you install shiplap over drywall?

You don't have to put your shiplap over drywall if there isn't existing drywall already in place. However, if you are simply remodeling a room, you can certainly put shiplap over existing drywall. Either option is relatively simple but requires a few different precautions mainly revolving around locating the studs.

What is the difference between shiplap and tongue and groove?


Tongue and groove and shiplap cladding do look very similar once installed. The main difference between them is a longer lip on shiplap cladding, which acts as an additional layer of protection against moisture and rainfall. Because of this, shiplap cladding offers optimum rainwater resistance.

How do you paint between shiplap?

  1. Matte or flat are 2 of the most popular paint sheen choices for shiplap.
  2. Prep the shiplap boards by making sure all the boards are sanded smooth for the ideal paint application.
  3. Paint the wall with the shiplap color.
  4. Fill the nail holes with paintable caulk if you want a seamless look.

Does shiplap expand and contract?

One of shiplaps best qualities is that because it is wood, it expands and contracts. This keeps it from cracking, unlike drywall or plaster, which can form hairline fractures when forced to expand or shrink. Many people today also use tongue and groove boards for the same effect that shiplap gives.

What does Joanna Gaines use for shiplap?

Joanna uses natural wood shiplap as wainscoting in this home's living room. You can also create a taste of rustic style by adding wooden box awnings over your home's windows, like Joanna Gaines did in this Craftsman-style living room. Or, use the weathered wood to create a built-in bookshelf.

Should you paint shiplap before installing?

Paint the wall the color you plan to paint the shiplap.
Not only will painting it after not work all that well, it will tear up your brush and take forever (if you are using faux planks make sure and sand the edges before installation as well).

Will shiplap warp in a bathroom?


If not installed correctly, shiplap can warp or rot. This is especially true if it is installed in a bathroom or basement where moisture can seep in.

Does shiplap make a room look smaller?

Wall to Ceiling Shiplap
Picking the same pattern for walls and ceiling can help define a space and point one's focus toward the room's furnishings. You can even switch up the colors on the shiplap to make a room feel bigger or smaller.

What can I use instead of shiplap?

If you're a fan of white walls but seek something other than shiplap, consider the following looks:
  • atlanta homes mag.
  • bhg.
  • tobi fairley.
  • studio mcGee.
  • farrow & ball.
  • butterfield custom homes.
  • stone masonry company.
  • Neptune.

Is shiplap still in style?

It's hard to bury the thought of the shiplap phase going its separate way, as it has historical roots and actual defining characteristics, many of which are even misunderstood by well-meaning designers. Shiplap will always be more than just plain wooden boards. Shiplap is definitely not outdated.

Why is shiplap so popular?

The wooden planks used in shiplap feature a special rabbet cut on the top and bottom, so that the planks can be easily pieced together, like a puzzle. This helps ensure that they not only fit together seamlessly, but — when used outside — they keep water out, too.

How do you hide seams in shiplap?


Before plywood and drywall, builders would line rooms in shiplap to keep them warm and dry, then cover it with a layer of muslin or cheesecloth and wallpaper to hide the shiplap's seams. (That means that, if you're lucky, you might uncover some original, tried-and-true shiplap beneath the layers during a renovation.)

Can you put shiplap directly on studs?

Shiplap can be installed directly to sheet rock/drywall. Simply mark the stud locations for nailing the shiplap or you can apply a construction adhesive such as liquid nails. If applying directly to the studs, you will need to check local building and fire codes to ensure the proper requirements are met.

What is the difference between beadboard and shiplap?

Unlike beadboard and V-groove, which are connected via tongue and groove, shiplap boards are joined with an overlapping “rabbet” joint, which usually creates a 90 degree-angled gap in between the boards. (I say, “usually,” because just to confuse things, there is V-groove shiplap with a beveled edge.)