How do you make a staircase in Revit calculator?

Asked By: Crecencio AmaguaƱa | Last Updated: 17th May, 2020
Category: hobbies and interests woodworking
4/5 (289 Views . 18 Votes)
Use the Stair Calculator
  1. In the drawing area, select the stairs.
  2. On the Properties palette, click Edit Type.
  3. In the Type Properties dialog, for Calculation Rules, click Edit.
  4. In the Stair Calculator dialog, select Use Stair Calculator for slope calculation.
  5. Under Calculation Rule for target slope, enter a value to multiply by Rise.

Click to see full answer


Accordingly, how do you make a staircase in Revit?

How to Create Code Compliant Stairs in Revit

  1. Obtain the required regulations for staircases in your local area.
  2. Select the Stair function.
  3. Select the Default staircase type.
  4. Duplicate the Type.
  5. Enter Maximum Riser Height and Minimum Tread Depth as per the compliance rules.
  6. Click Edit Calculation Rules.
  7. Tick Use Stair Calculator.

Secondly, how many stairs do I need? Measure from the very bottom of the stairs to the top of the space where the stairs will be, which is the rise. Subtract 6-7 feet from the total rise to account for headroom, then divide that number by 6 or 7 inches to get the total number of stairs you'll need to build.

One may also ask, how do I change the height of my staircase in Revit?

First You have to duplicate the staircase and then Select > Edit Type > Calculation Rules > Change Maximum Riser Height( i.e. if you want riser height 155 mm you should change maximum riser height to 180 mm) Now in properties change desired numbers;it will change riser height.

How do you make stairs in Revit 2020?

Open a plan or 3D view. On the ribbon, click Architecture tab Circulation panel (Stair). Optional: To specify the type of railing to be created for the stair run, click Modify | Create Stair tab Tools panel (Railing). For details, see Specify the Railing for a New Stair.

24 Related Question Answers Found

How do you attach stringers?

Attach the stringers to the deck using angle brackets and 3” galvanized deck screws. Cut a 2x6 board to fit snugly between the two stringers at their base. This will be used to fasten the stairs to the concrete pad. Place the board between the stringers and attach to stringers with 3” galvanized deck screws.

How do you draw a staircase?

How to Draw Stairs
  1. First, draw two lines that are slightly closer to each other at the top.
  2. Now draw the lines connecting the two lines that we drew in the previous step.
  3. Under the lines from the previous step, add more lines as shown in our example.
  4. Draw lines between the lines from the previous step.

How do you change the width of stairs in Revit?

Modify Stair Dimensions
  1. change the value for the Actual Run Width instance property. See Run Component Instance Properties.
  2. in stair assembly edit mode, select the run, and edit the temporary dimension for the run width. The direction in which the run width changes is dependent on the Location Line value for the run.

What is the length of a staircase?

All staircases have one more riser than they do treads. This means you will have 13 treads for a total length of 130 inches or 10 feet 10 inches. You must also figure in a minimum three-foot landing or clear floor area at the bottom of the steps.

Is 45 degrees too steep for stairs?


Stairs are typically not defined by angle but by the size of the treads and risers. Using those dimensions a stair at 45° would have 7″ treads (too small) with 7″ risers or 11″ treads with 11″ risers (too big). So yes, a 45° stair is too steep and more importantly doesn't even come close to meeting the building code.

How do I calculate my daily steps?

Assuming each step is pretty much the same length, all we need to do is count the number of steps we make in a day, by counting the number of times our body tilts from side to side. We can then multiply the number of steps by the length of each one to figure out the overall distance walked.

What is the ideal rise and run for stairs?

The general rule (in the US) is 7-11 (a 7 inch rise and 11 inch run) (17.78cm-27.94cm). More exactly, no more than 7 3/4 inches (19.7cm) for the riser (vertical) and a minimum of 10 inches (25.4cm) for the tread (horizontal or step). You can find some more information here as well on other stair-related dimensions.

How much is a flight of stairs?

Climbing a flight of stairs—roughly 10 steps—is equivalent to taking 38 steps on level ground, Dr.

How many steps are in a mile?

An average person has a stride length of approximately 2.1 to 2.5 feet. That means that it takes over 2,000 steps to walk one mile; and 10,000 steps would be almost 5 miles. A sedentary person may only average 1,000 to 3,000 steps a day. For these people adding steps has many health benefits.

What angle should stairs be?


The angle is based on the amount of space available, but is commonly determined by the rise and run of a stair. With a 7 inch riser and an 11 inch tread (this is usually a minimum) you get an angle of arctan(7/11) or 32 degrees. Most carpenters will simply use a framing square to figure this rather than doing trig.

How much does it cost to carpet 13 stairs?

For a stairwell with 13 stairs and one landing:
7+7+2 = 16 inches. 7 inches for each rise and run plus two inches for the nose and overage. 16 inches x 13 stairs = 208 inches. 208 inches/12 = 17.33 (round up) = 18 feet.

How many stairs can you have before a landing?

Length of flight
Stairs with more than 36 risers in consecutive flights should have at least one change in direction between flights. For buildings other than dwellings, the maximum number of risers between landings should be 16 for utility stairs and 12 for general access stairs. There should not be any single steps.